Canon image runner advanced C2030/C20 ,printing labels problems

Question

Question is for Canon image runner advanced C2030/C20 ,printing labels from Filemaker pro 10
1)how & where do you  turn off the double sided printing?
2it )will only print the first 30 pages in a range,how do I increase this 

Answer 1

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.