Canon imagebrowser KERN_PROTECTION_FAILURE error

Heya
Wondering if any of you fabulous people can help me with a crashing programme that worked just fine last time I used it.
Uninstalled then reinstalled.
Added the update *as recommended by Canon when I emailed them*
Verified & repaired permissions.
Still no joy.
Today I rang Canon and they said it's an Apple problem not a Canon one.
Hmph.
The top part of the error message goes as below .....
Love and peace ~~~ Dee *the D stands for Dirty-sweet*
Date/Time: 2006-03-22 11:55:06.399 +0000
OS Version: 10.4 (Build 8A428)
Report Version: 3
Command: ImageBrowser
Path: /Applications/Canon Utilities/ImageBrowser/ImageBrowser.app/Contents/MacOSClassic/ImageBrowser
Parent: WindowServer [67]
Version: 5.5.0.21 (5.5.0)
PID: 278
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000

Heya Jrsy Man
Yes I did that too and still it crashes when I go to open the 'pictures' file on the left menu.
It's a pain indeed!
I use Imagebrowser for my personal photos and iPhoto for my work ones.
It's just easier for putting them onto external hard drive without selecting individual folders.
If it comes to it I'll have to import my images to iPhoto.
I reckon it's a conflict of something I have added or done since I last used the application. Although finding what could be a loooooonnnnnnnger process.
Thanks for your excellent help =)
Love and peace ~~~ Dee x *the D stands for Divine*

Similar Messages

  • My MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

    my MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

    Hi hthpggy,
    To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10 minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing to resolve the issue. 
    Please drop us a line by clicking on the Contact Us link to start the process!

  • Canon ImageBrowser 6.1.1 crashed on Mac OS 10.5.2

    My Canon ImageBrowser 6.1.1 (upgraded from version 5 with my EOS 30D) can only be launched once after the completion of installation; and can't be launched again in any attempts (I do not have any change in setup or software installation after first successful launch). Do you have any idea? Many thanks.
    PS The problem details is given below:
    Process: ImageBrowser [163]
    Path: /Applications/Canon Utilities/ImageBrowser/ImageBrowser.app/Contents/MacOS/ImageBrowser
    Identifier: com.canon.ImageBrowser
    Version: 6.1.1.17 (6.1.1.17)
    Code Type: X86 (Native)
    Parent Process: launchd [69]
    Date/Time: 2008-05-30 23:48:16.188 +0800
    OS Version: Mac OS X 10.5.2 (9C7010)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 1
    Thread 0:
    0 libSystem.B.dylib 0x959105da getdirentries + 10
    1 libSystem.B.dylib 0x95910514 readdir + 70
    2 com.apple.CoreFoundation 0x92629590 _CFBundleCopyDirectoryContentsAtPath + 1264
    3 com.apple.CoreFoundation 0x9262df09 _CFBundleURLLooksLikeBundleVersion + 57
    4 com.apple.CoreFoundation 0x9261e9ef _CFBundleCreate + 287
    5 com.apple.CoreFoundation 0x9261efeb CFBundleCreateBundlesFromDirectory + 187
    6 com.canon.canonIHL 0x13bc0574 IHL_StartImageHandlingLibrary + 106
    7 com.canon.ImageBrowser 0x00009d8e CIHLApi::StartImageHandlingLibrary() + 42
    8 com.canon.ImageBrowser 0x00009b4b CIHL::Initialize() + 11
    9 com.apple.Foundation 0x90929cdc nsnotecallback + 364
    10 com.apple.CoreFoundation 0x926599da __CFXNotificationPost + 362
    11 com.apple.CoreFoundation 0x92659cb3 _CFXNotificationPostNotification + 179
    12 com.apple.Foundation 0x90926fd0 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128
    13 com.apple.Foundation 0x90930668 -[NSNotificationCenter postNotificationName:object:] + 56
    14 com.apple.AppKit 0x96277377 -[NSApplication finishLaunching] + 515
    15 com.apple.AppKit 0x96276dfd -[NSApplication run] + 83
    16 com.apple.AppKit 0x9624430a NSApplicationMain + 574
    17 com.canon.ImageBrowser 0x00002022 _start + 216
    18 com.canon.ImageBrowser 0x00001f49 start + 41
    Thread 1 Crashed:
    0 ??? 0000000000 0 + 0
    1 com.canon.canonIHL 0x13bb99cc IHL_GetMyColorInfo + 8520
    2 com.canon.canonIHL 0x13bb7272 IHL_Parse + 88
    3 com.canon.ImageBrowser 0x00009f2b CIHLApi::Parse(unsigned long, psBaseViewProperties*, psBaseFullViewProperties*, psBaseMovieProperties*, psBasePictureProperties*, psBaseShootingProperties*, pslStream*, pslStream*, pslStream*, pslStream*) + 111
    4 com.canon.ImageBrowser 0x0000aef3 CIHLImageObject::Parse(psBaseViewProperties*, psBaseFullViewProperties*, psBaseMovieProperties*, psBasePictureProperties*, psBaseShootingProperties*, CStream*, CStream*, CStream*, CStream*) + 223
    5 com.canon.ImageBrowser 0x000ddf5c DMSIHLUtilsGetCaptureTimeAndGenre + 188
    6 com.canon.ImageBrowser 0x000de103 DMSIHLUtilsGetCaptureTimeAndGenreFromPaths + 97
    7 com.canon.ImageBrowser 0x000f6e91 -[C_GetImageDocsTask executeProcess] + 230
    8 com.canon.ImageBrowser 0x000e156c -[C_TaskThread runLoopInternal] + 254
    9 com.canon.ImageBrowser 0x000e1411 -[C_TaskThread runLoop:] + 134
    10 com.apple.Foundation 0x9092a5ad -[NSThread main] + 45
    11 com.apple.Foundation 0x9092a154 _NSThread__main_ + 308
    12 libSystem.B.dylib 0x9591dc55 pthreadstart + 321
    13 libSystem.B.dylib 0x9591db12 thread_start + 34
    Thread 1 crashed with X86 Thread State (32-bit):
    eax: 0xb00bb644 ebx: 0x13bb7ac1 ecx: 0x00000000 edx: 0x13be9560
    edi: 0x003bbf24 esi: 0xb00bb5f4 ebp: 0xb00bb668 esp: 0xb00bb54c
    ss: 0x0000001f efl: 0x00010246 eip: 0x00000000 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000000

    7 com.canon.ImageBrowser 0x00009d8e CIHLApi::StartImageHandlingLibrary() + 42
    Looks like it's either a Canon bug or filesystem corruption to me. If getdirentries was genuinely broken a lot more people would be complaining about it.

  • Simply want to run Canon Imagebrowser

    Not sure where to post this. Canon software is a huge part of my workflow. Mac OS Lion elimitated it and left no option other than trashing all software and moving to a PC.
    Any options for running Canon Imagebrowser under OS Lion?
    Thus far, searchin has revealed nothing other than previous (erronious) searches.

    inte_moto wrote:
    Not sure where to post this. Canon software is a huge part of my workflow. Mac OS Lion elimitated it and left no option other than trashing all software and moving to a PC.
    Any options for running Canon Imagebrowser under OS Lion?
    Thus far, searchin has revealed nothing other than previous (erronious) searches.
    Unfortunately, Canon are the one's who seem to be lagging behind badly in their program development, particularly for Mac OSX. Their developers have had 6 years to get their software up to date and drop the PPC coding for Intel. Hopefully they may update not to far into the future.
    Good Luck
    Pete

  • Using canon ImageBrowser

    I used Canon Imagebrowser to transfer pictures from my camera and now have no idea where they have been saved, please help! (I've already downloaded the newest version of imagebrowser also)
    Thanks!

    Welcome to Apple Discussions
    Use Spotlight and do a date search, Canon Images are stored in folders named for the date taken/downloaded to the Mac. I'd be pretty sure there will be a Canon folder inside /Pictures with the sub-folders inside that.
    http://web.canon.jp/imaging/software/ib5-e/html/01_1.html

  • Canon mp258 b200 error code

    i had a problem with my canon mp 258 error b200

    Hi guadaduque, thanks for posting!   In order to allow the Community to better help with your question, we'll need some more information from you.
    What exact computer operating system are you using? Once we have this information,  the Community will be better able to help get you up and printing again!

  • How can I repair Canon Pixma MP550 Error B200?

    How can I repair a Canon Pixma MP550 error 200?

    Hi dlp1962uva,
    Welcome to the Apple Support Communities!
    I understand you are trying to install your Canon printer after replacing your hard drive on your MacBook Pro. It sounds like you have done some great troubleshooting by trying to install the drivers. I did some research on your printer, the Canon PIXMA iP6000D and it appears that this printer software is no longer available through software update.
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    Additional Information
    Printer software no longer available through Software Update
    The third-party vendor no longer provides software for the following models to download and install through Software Update. Contact the vendor or visit their website for further assistance.
    The The Additional Information section where I found this information is at the very bottom of this article. This printer specifically is listed as a printer that is no longer supported by software update is the list under Additional Information. I would suggest contacting Canon to see if the printer drivers are still available through them.
    I hope this helps,   
    -Joe

  • Log & Transfer of Canon HF 11: error message

    Hi guys,
    I just got a new canon HF 11 (basically the same as the HF 10) and i tried to import footage using Log & Transfer but every time I click "add clip to queue" it spins a grey icon for a few seconds which then turns to a red circle with an exclamation mark inside and says "Error: No Data". I have tried giving the clip an in and out mark but this doesn't help.
    Any ideas,
    Thanks

    I have had a similar problem with my Canon HG21 which has both hard disk and 32GB flash drive. My method is to copy files from the Hard Disk to the flash drive and then place the flash drive into a card reader. I was able to see FCE downloading in log and transfer for a second or two and then it went into an idle mode and never downloaded the file.
    My solution was to delete ALL from from the flash drive followed by copying the videos and stills from the hard disk onto the clean flash drive. I realize you don't have the luxury of the hard disk, but perhaps you can extract the files using the Voltiac tool to clone the Canon structure from the camera and see if log and transfer will work directly from your hard disk on the Mac.

  • Canon iR 5055 error specify correct ID and Password

    We have a Canon iR5055 B/W copier on our network and 2 staff members can not print to it. When they try to print, I get an error message that says they have to specify a correct ID and Passwrd Error: 15513. I have uninstalled and reinstalled the drivers, the same one on all the other laptops and desktops that are work. I even tried updating the software at Canon's website and all to no avail. I have tried it as Administrator and having the customer log on, and they have admin rights as well, and still ge tthe same results. Any suggestions oor help would be greatly appreciated.

    We do watch/control access and the number of copies, all they have to do is enter in their Department ID for that assigned user. I have 2 users, different buildings and assigned to different Canon iR5055 copiers, that have the same issue. All the other faculty in those 2 buildings can print from their office to their respective copier. All staff use MacBook Pro with Lion installed. When we initially issued the laptops, they were identical in every way in regards to hardware and software installed. Half the faculty do use VMware to launch Windows 7, but these 2 are fans of Mac OS's and that is all the use. I can also ping the ip for the copiers from the individuals laptops, so I know there is connectivity.
    The only thing I haven't tried is having them removed from their respective copier, reboot the copier, then have them re-entered as a user of that iR5055 in their building.
    If it was all users, I would have started at the Copiers and followed Canon's steps to import a new user list. But this is effecting 2 users, assigned to 2 different buildings, assigned to 2 different iR5055's. But since it is only these 2 individuals, I'm looking at the laptops they have.

  • Canon MX870 B200 error, how to use scan only?

    I have Canon MX870 which I only use it for scan. When I'm turning the printer on at the booting process it give me B200 error and STOP to work completely.I have to open and close cartridge door couple times at the startup to can skip the B200 error and be able to use the scanner.I know the problem is related to cartridge or printhead or something about printing. I only use this machine for scanning and i don't need to print at all. How I can disable or disconnect the printing component on this machine to be able to use just the scanner?
    or at least disable the printer diagnostic at the start up?   

    Hi g6381646, We do not have instructions for disabling the printer diagnostic at startup or disconnecting the printing component of the printer; the printer will require servicing to resolve the error.  Please call or email us using one of the methods on the Contact Us page to obtain your servicing options.

  • Canon PIXMA MX860 Error 311

    Hi,
    I recently bought a Canon PIXMA MX860. I want to print wirelessly via bluetooth from my computer, but an error message keeps on popping up "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred eliminate the cause of the error."
    I updated to all the newest drivers. I tried looking at the gutenprint drivers, but I couldn't find one that works with the Canon PIXMA MX860. Any help would be much appreciated!

    These threads may help:
    http://discussions.apple.com/thread.jspa?messageID=10105410&#10105410
    http://discussions.apple.com/thread.jspa?messageID=9962758&#9962758

  • Canon MX860 get error 300 when printing wirelessly from MacBook Pro

    I've been printing wirelessly for several years and most recently after an upgrade to OS X 10.10.1 Yosemite it was printing fine until this morning. Something changed and I get error 300 when I try to print. If I connect my MacBook to the Canon MX860 printer using the USB cord it prints fine so I'm assuming it's some sort of wireless connection issue. I powered down and up both the printer and the Macbook and still get the error. I tried the "Reset Printer System" from the System Preferences and now I can't add the printer back in. I tried using the CD that came with the printer to reinstall the wireless connection and the set-up program says it's incompatible with my operating system and refuses to run. Any assistance to help me print wirelessly again would be very much appreciated. Thank you.

    After further investigation, we believe this is due to an intermittent  modem problem and is not the fault of the printer or MacBook.

  • Trouble importing from Canon HG21 AVCHD - error message in iMovie 08

    We bought a Canon HG21 AVCHD camcorder. I am able to see the videos and play them when connected using iMovies '08. When I import them, however, I keep getting an error message (no number, just error in importing, check video). I have about 10GB of space. I thought I'd try simply importing a 25 second clip to see if that was the problem. Still, same error. I tried hooking up my external drive to import to that instead, but it will not show it as an option in the drop down menu.
    I've spent all day trying to find the solution. I'd love some help if anyone can tell me what to try next.
    Thanks!

    You do not have enough space on the internal drive to do the import. (You need a good bit of free space just to run the operating system.)
    So you need to use an external drive.
    For iMovie to see an external drive, it must be formatted as MacOS Extended (journaled). You can check the formatting by right-clicking on the drive in the Finder and selecting GET INFO. If the drive is FAT32, it will not work, but it is likely that you could reformat it.
    Note: Reformatting a drive will erase everything that is on it, so be sure to back up anything you need to keep.
    To reformat, open DISK UTILITY. It should be in your Applications Folder under the Utilities folder.
    In Disk Utility, select your external drive, and press PARTITION. Make a single partition, and choose GUID as the partition scheme. When that completes, press ERASE, and choose Mac OS Extended (journaled) as the formatting. Let it run and you are done.
    iMovie should now see this drive.

  • Can anyone identify this Canon SLR Image error?

    Good Day Canon enthusiasts,
       Does anyone know what happened to this image? Specifically the 1/3 split in the image.
    This is the only photo that did this out of the 100 photos taken that day.
    Canon 1D Mark 3 + 85mm 1.2
    Thanks in advance!

    Mike... I want to extend out a thank you for taking the time to help out with this issue.  I hope a lot of other canon users find this informational in the event it happens to them in the future.
    to answer your questions:
    Does this occur when using multiple memory cards, or just one specifically.
           Very nice trouble shooting question, but I have bad news.  I already wiped the media cards for another project after backing up original photos.
    2.   How often do you format your memory cards?
           I format after every big project that almost fills up the media cards or if it's multiple smaller projects, I would just create multiple new folders on the same card.
    3.  What shutter speed was used in the provided image?
         1/160. 
    4.  Does the issue go away or become less frequent with slower shutter speed settings?
         That frame as #68 out of about 100 photographs on that set.  I think that was the 2nd time it happened. It doesn't happen frequent enough to test it at lower shutter speeds.  The past few days for another project I have put on about 20,000 shutter clicks tethered to a MPB & to my knowledge I have not seen that error.
    Mike, thank you again!

  • Canon iRC2380 - Print Error -50

    I just installed the newest printerdrivers for a Canon iRC2380. When I print I get error code -50.
    Canon won't help me since it's a filesystem error. (-50 paramErr Error in user parameter list)

    The Canon controller has three queue names; LP, SPOOL or DIRECT.
    With the queue set to LP, the settings in the copier determine the internal processing, which is typically DIRECT, meaning that the print job is sent to RAM and processed and only moved to the HD if necessary.
    With the SPOOL queue, the print job is sent to the HD first regardless of the copier settings. Once the entire job has been received in the drive, the data is then sent to RAM for processing.
    So, I suggest you use LP and let the copier decide if the job can stay in RAM or needs the HD.
    Pahu

Maybe you are looking for