Canon ImagePROGRAF 6350 PRINTER NOT CONNECTED ERROR

My Canon ImagePROGRAF 6350 is connected via USB to my iMac; however, I am still getting a PRINTER NOT CONNECTED ERROR. How do I fix this?

We updated two computers on our network to 10.6.8 (from 10.5) and another (PPC iMac) to 10.5 (from 10.4). In each case, I had to first remove the printer from Print/Fax, then reinstall from the original CD, and then update to latest drivers, and then the printer worked fine. This was for a Canon 8210 Print and Scan multifunction device, so I was inferring that Canon drivers/software need to be reinstalled when updating to later versions of the OS. Hence my recommendation. The Canon website shows drivers for your device for both 10.6 and 10.7, so it appears to be usable under the latest Mac OS. It seems that if you can start from as close to "scatch" as you can and then reinstall (much as if you got the printer brand new), you have a better chance. This might involve "uninstalling" by hand if need be, to remove vestiges of the previously installed stuff.

Similar Messages

Printer not connected error in 10.10.3

I'm getting "Printer not connected" now since I've upgraded to 10.10.3 on my Epson WF-3540 on my MBPr. My two other Macs are not having this issue, one of which is also 10.10.3 and the other 10.10.2 (a MacPro and MBP respectfully).
I have tried the following on my MBPr:
Delete Jobs
Pause and restart queue
Restarting Mac
Restarting Printer
Resetting Printer
Delete and reinstall printer - Both via AirPrint and Epson drivers
Reinstall fresh downloaded drivers
Repeat 6 with new driver install
SMC and PRRAM reset
Printer can be seen easily in printer control panel for setup. Setup proceeds normally. Then when attempting to print, the queue displays "Printer not connected" error.

If the printer works with AirPrint, you don't need the EPSON software and you should remove it. Then see below:
OS X Yosemite: Reset the printing system

"printer not connected" error over a wifi network

I have a HP CP2025N laser printer that has been happily working on my Apple network. Now all of a sudden I keep getting a "printer not connected" error.
I reset the network to no avail.
I am running Lion, the printer is connected via an ethernet cable on a Apple Express routter that extends an apple extreme. Again this configuration has been running for two years now.
Any help would be appreciated.

If the printer works with AirPrint, you don't need the EPSON software and you should remove it. Then see below:
OS X Yosemite: Reset the printing system

Wifi printing after Mountain Lion upgrade, "printer not connected" error

I have Canon MP610 printer. Was getting error message "Looking for printer" or "Printer not connected" after upgrading to Mountain Lion 10.8. Printing works fine when I directly plug in USB cord to MacBook Pro to print. However, on the wifi network, no luck. Today I have upgraded Canon's latest driver, reset the printer system, deleted printers from system icon in System Preferences, added new printer back in..... Nothing.
I have reset Time Capsule, where my printer USB is currently plugged into.
Nothing.
Please advise what to try next...??

AirPort Utility 5.6 is available at AirPort Service and Support.
5.6 doesn't work with Mountain Lion, so am I stuck?
I already had AirPort Utility 5.6 on a Lion machine and upgraded to Mountain Lion with no issues. AirPort Utiliy 5.6 works fine as does AirPort Utility 6.1.
But, I did not try to download and install AirPort Utility 5.6 since it was already on the Mac.
Please try again and report on your results.
AirPort Utility 5.6 for Mac OS X Lion

How do I resolve a "printer not connected" error message?

Dear Mac Community,
For the better part of a year I have printed flawlessly to my HP Color LaserJet CP4020 on my home wireless network. Recently I upgraded to OS X 10.8.4 and now when I print, the queue stalls and I receive the following error message, "The printer is not connected."
Here is what I have tried so far to resolve the issue but to no avail:
Downloaded and installed the latest HP firmware and software drivers
Deleted the printer and added it again in Preferences>Print & Scan
And, of course, the above noted bullet point is the rub: If the printer were not connected to my wireless network then it would be unable to be added! But since I can add the printer, my OS is definitely seeing the printer on the network.
After the above diagnostics I tried printing from native Mac OS apps (e.g. TextEdit) and non-native apps (e.g. Microsoft Word), and both worked.
Then they stopped.
Then they would print after several minutes of delay (e.g. a single sentence Text Edit test print page took over a minute and a five sentence Word document took over 5 minutes).
Then they stopped.
And now I cannot print anything!
In case it helps, my specifications are as follows:
MacBook Pro running OS X 10.8.4 with 8 GB RAM, 500 GB HD, 75 GB available HD space
HP Color LaserJet CP4020, Firmware v.20120112 07 .111.0, Software Driver v. 9.4
Any help anyone could provide would be GREATLY appreciated.
Sincerely,
Randy

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/cups/error_log" from the file list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Printer Not Connected error with HP Wireless Printer

Hi everyone,
Just bought an iMac, first time ever using OSX and trying to add my new HP 2540 wireless printer. I've spent 4 hours on this so far and now looking for help!
I've followed every instruction to the letter - the wireless connection with the printer is fine as I printed off a report, it will print connected via a cable and it recognises my printer in applications and I have done the set up via disc about 20 times uninstallig each time and starting from scratch again. I've downloaded the latest driver from HP. All I get is a 'printer is not connected/printing looking for printer' endless bar when I click 'print'. It seems to be an issue of it not recogising it over the wireless connection despite it being connected to my router.
What am I doing wrong? How do I fix this?
Many Thanks!

Connecting a printer is pretty simple if you follow Apple's process, ignore HP's guides!!
You can find Apple's instructions by clicking Mac Basics: Printing in OS X
In the event you still have trouble give AppleCare a phone call, you have 90 days of free telephone support and Apple can help resolve most issues. If you don't know the phone number in your area please click Contact Apple for support and service to locate it.
Good luck and welcome to the light side.

Printer not connected - iMac 10.8.4 & EPSON XP400

Everything worked fine until Mountain Lion 10.8.4 and latest Apple update of early July with new Epson drivers and after many attempts deleting and adding this printer, using Bonjour or IP direct addressing.
Wireless is fine, no RF interferences, internal printer webpages are correctly accessible, scanning is fine, only printing stops with "Printer not connected" error message.
There is another strange message on CUPS error log, something like "Impossible queuing on Lexmark_Z45 printer".
This was an old printer I unsuccessfully tried to connect to my iMac before buying this new EPSON XP 400 and apparently fully removed from OSX.
I also searched entire filesystem to find Lexmark occurences but nothing was found.
Is it anything related with Bonjour?

There is only my iMac, this EPSON XP 402 printer and router D-Link DSL 2680:
Router Hardware Version
A1
Router Firmware Version
v1.16t.
iMac is connected via Ethernet cable, while printer is connected via wireless (see table):
Printer :
EPSONC47792
Firmware:
UM18D4 46.46
Connection status:
Wireless connection-65Mbps
Signal :
Excellent
Obtain IP address:
Auto
IP address:
192.168.1.254
Subnet mask:
255.255.255.0
Predefined Gateway :
192.168.1.1
DNS server:
Auto
Primary DNS:
confidential
Secondary DNS:
confidential
Proxy server:
Don't use
Wireless connection configuration :
WPS
Communication mode :
Infrastructure
SSID :
D-Link
Protection level:
WPA-PSK(AES)
Bonjour service name:
EPSON XP-402 403 405 406 Series
Bonjour place
-blank-
Maximum priority protocol
IPP
As I said, scanner is working very well.
Thank you again for your support.

Installed a wireless canon Pixma MX432 printer back in November for use with my Mac Book Air. All was working normally until this past week when I began getting a message, "printer not connected." What is going on? Netgear Wireless N Router seems to be ok

My new canon Pixma MX432 printer is not printing. It was printing fine until about ten days ago. I use a Netgear Wireless N router, which is also new. What do I need to do. I get a message when trying to print that says "printer not connected." In addition, my old Gateway laptop will still print fine apparently because it has a cable connection to the printer. Puzzled!

Have you tried rebooting the router? I would unplug it, wait a few seconds, then plug it back in. Be sure you know the password etc. if that doesn't work, try unplugging and rebooting the printer. Good luck!

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer not connected message

I recently upgraded to Mountain Lion, and since then I am unable to print--I get the message "Printer Not Connected". My printer is connected to my Airport Extreme router via Ethernet cable. When I go to system preferences, then network, the firewire and the ethernet choices are red--as in not connected or not working. When I go to advanced, after choosing ethernet, I clicked on Renew DHCP Lease, but this doesn't change anything. Any help would be appreciated, because I use my printer all the time. It is a Canon Pixma MG8120.
Also, my Airport utility is saying "No configured Airport base stations have been found. Airport Utility will continue searching."

This is a common complaint after upgrading from Snow Leopard systems.
Try this - reset your printing system as described here:
http://support.apple.com/kb/HT1341
Choose System Preferences from the Apple menu.
Choose Print & Scan from the View menu.
Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
Then, add the Canon Pixma again using the "+" button.
What does Reset Printing System do?
Deletes all queues and jobs.
Resets all printer settings to their default by deleting configuration files.
Performs a permissions check on the /tmp directory.
Any printers, scanners, or fax modems that previously appeared in System Preferences will need to be added again after resetting the printing system.
That should fix it.

I am trying to connect my Canon MG5220 and its not connecting to my macbook running lion?

i am trying to connect my Canon MG5220 and its not connect to my macbook running lion? i updated the drivers to 10.7 lion and i reconnected the printer to my wifi which both devices are connected to. when reinstalling the drivers, it will not connect. using Canon IJ Network Tool cant find the printer it always comes up with
The printer could not be detected. Please confirm the following:
- The network settings are correct.
- The printer is turned on.
- The printer is not used from another computer.
i have turned the printer on and off, its not connected from another computer, and im almost 100% sure the network settings are correct

Syncing with iTunes
How to transfer or sync content to your computer
If your contacts are in a supported appllication or cloud service, the above will allow for syncing them to the iPhone.

Canon pixma mx850 printer not reading my computer - will not print

canon pixma mx850 printer not reading my computer - will not print
I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
I've tried all the trouble-shooting suggestions to no avail.

Hi scheideckerj,
Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing. Please click here to go to the Drivers and Software page for the PIXMA MX850. Once on the download page, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

Canon ImagePROGRAF 6350 PRINTER NOT CONNECTED ERROR

Similar Messages

Maybe you are looking for