Canon IP1700 network connection to a windows pc how to?
I have a windows pc with an IP1700 connected to it, I want to allow my macbook to network print to the printer,
The macbook can see the ip1700 just fine, however, I does not have a driver for it.
I downloaded the diver for osx from canon, its not a driver but an install app. It works fine if i have the ip1700 connected direct to the mac, but when network connecting when its connected to the pc it demands a driver and I can not locate the driver file on my mac, I have tried to look in the package contents, no go. I looked in the printers folder of my home folder, no go. It will not work with a generic postscript driver. Im screewed.
Help!!!
Thanks
Ok, i got this to work by going to
www.printfab.net
I install the printfab application which has support for the ip1700
You can check and see if they have support for your printer.
Once its installed, you can use the windows printing tab to select your shared windows printer,
then go into the driver list and if your printer is supported it should be in there.
Please note you dont actually runt he printfab app, you just use the drivers that it installed for you for the printers it supports.
Hope this helps.
Similar Messages
-
When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason this is happening?windows
Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
You may have an IP conflict in your network.
Check on your various network configuration parameters in your iPad, PC and WiFi router. -
When trying to access imessage on my iPhone 4s an error message pops up; "Check your network connection or try again later" how can i fix this? This became a problem after i updated the latest software update and i can't seem to fix it.
Hi annmariefromuky,
If you are having issues accessing iMessage, you may find the following article helpful:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Regards,
- Brenden -
Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?
Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have?? -
Network Connectivity Assistant in Windows 8.1
What happened to the Network Connectivity Assistant in Win8.1? In Win8 it would launch a "DirectAccess" dialog like the one in this blog:
http://blog.msgeneral.nl/2012/03/direct-access-connectivity-assistant-in.html
But in Win8.1 double-clicking and righ-clicking doesn't do anything:As Richard points out you can only access the NCA via the following.
To access the DirectAccess connection properties in Windows 8.1, press
Window Key + I, click Change PC Settings, and then click
Network.
Highlight Connections and click Workplace Connection.
It is a step back for those that are used to the DCA or Win8 NCA.
Note: also you need to have a email client enabled on the client to get the logs.
Also there is the "Microsoft DirectAccess Client Troubleshooting Tool "
Regards
Regards, Rmknight -
Yoga Pro 2 - No network connections/WiFi after Windows 10 Upgrade
Windows 10 upgrade completed OK but no network adapters appear in Windows settings and no network connections available. Updated Intel 7260 drivers (v, confirmed device was working properly, download and installed Windows 10 WLAN update from Lenovo, checked WiFi was enabled in BIOS, checked Airplane mode was off, still nothing. IPCONFIG just comes up blank, No network adapters showing in Network Settings. Reverted back to Windows 8.1 after 6 hours. Any ideas, anyone?
Same problem here, tryed to get drivers from Intel page, which was launched 29/07/2015, and still doesnt work. Even tryed to plug network cable and still won't work. Dont want to roll back to win 8.1, so please help.
-
Show Network connections Charm in windows 8.1 app
Hi ,
Is there any API (code) to display the network charm directly from windows 8.1 App ?
like the Networks display appear when we click on the network icon on bottom right corner in desktop mode.I don't know of any - why would you need this?
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
tim-bob wrote:
Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
If you haven't yet installed the Windows Support Software, that's probably why, so install it now. -
I have my Canon iP1700 printer connected to my PC running Vista and i have enabled printer sharing enabled but when i bring the printer menu it does not show up on my mac any help?
The first thing is to ensure that both the Mac and Vista are on the same IP subnet. Th subnet is typically the first three sets of numbers in your IP address.
The next thing is to check that both computers have the same workgroup name. Windows will usually be defaulted to workgroup unless you changed it during the installation of Vista. The Mac will not have anything set by default, so if you open your network settings and select the WINS tab, you can select or type the same name.
With the subnets and workgroup name correctly set you should be able to select to add a Windows printer and see the Vista box after selecting the appropriate workgroup in the list. If you still do not see the PC after setting the above correctly then please reply.
Pahu -
Can't use correct driver for Canon MF4140 USB printer shared by Windows XP
Hi all,
I have a Canon MF4140 printer connected to my Windows XP desktop machine via USB. The printer is shared and I can see it over the network with my MacBook running OS-X 10.4.
I've downloaded the OS-X version of the printer driver from Canon, but I can't select it when adding the printer in OS-X, so I can't access any of the printer settings. I've selected the generic driver but that doesn't allow me to do double sided or 2-up printing.
Is this because the printer driver does not support network printing, as the printer doesn't have a network interface?I guess this isn't clear on the iFelix page. To use any of the built-in network printing protocols on OS X, you must either have a postscript printer (postscript printers don't require a driver, just a PPD), or a driver that works with the CUPS system (a CUPS driver). So far, Brother is the only non-postscript printer manufacturer that provides CUPS drivers. For every other non-postscript printer, you need a third-party CUPS driver. Apple tried to get around this issue by including Gimp-Print drivers (open source CUPS drivers), but your model isn't in Gimp-Print. You can look around for other CUPS drivers, but Lexmark hasn't been cooperative with driver writers. Here are the CUPS driver sources:
http://www.linuxprinting.org/macosx/
http://www.easysw.com/printpro/
http://www.printfab.net/
You may find it easier to share from OS X. -
How do i fix the network connection??
Every time i try and sync my ipad to my laptop it comes up the i need to authorise it. I try and authorise it and then it comes up 'Itunes could not connect to the iTunes store. Network connection has timed out. How do i fix this???
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Itunes error: network connection timed out
Every time I try and log into my Itunes account I get an error message saying We could not complete your Itunes Store request. The network connection has timed out. How can I fix it?
Edit: My virus scanner is Avg and I use ad-aware 2007 for spyware. I can't find a feature with either one that would block i tunes. Also, it's an allowed application with windows firewall.
Message was edited by: touch84Ive been having this problem for over 24 hours now. Bad bit is that I had restored my iphone just before this so ive been stuck without a mobile phone since then.
Symptoms:
Iphone appears in itunes but when the iphone tries to get onto the store to finish re-activation the connection hangs and then i get the error "we could not complete your itunes store request. the network connection timed out".
I can browse the itunes music store + podcast store and i can download podcasts.
Safari is working perfectly.
Anything anyone can suggest would be a big help. I presume it it apple's server's fault. -
Restoring Network Connections Error
We are using the Lenovo IOMEGA IX2 NAS. We have around 10 users who connect to this network drive. One PC is able to connect to it but the others get a Restoring Network Connections Error:
Microsoft Windows Network: Insufficient system resources exist to complete the requested service.
This connection has not been restored.
Anybody else have this issue?Hello jamescheung
The affected PC's do were they actually able to mount the share(s) at any point or are you getting this error while trying to mount the share(s)?
If they are able to mount, are you getting the error in explorer or a backup utility such as robocopy?
Do the affected computers experience the issue right after a PC reboot?
How many of the protocols are enabled on the ix2 and do you have media server and/or any of the active folder options enabled?
Have you tried to disable any non-critical protocols/features for troubleshooting?
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Few days ago, I downloaded through Lenovo System Update, the latest “Access Connections” for my X60. Since then unfortunately I lost all my network connections (i.e.: Wi-Fi and Ethernet connection) to the laptop. Can anybody help me restoring my connections?
I tried to Roll Back the Driver for 3945ABG but to no avail.
Any help will be appreciated.
Thinkpad X60
Windows XP Prof
Garokaygarokay, welcome to the forum,
if I understand your problem correctly, nothing showing in network connections, please have a look at the following link to an MS tip, it may hold the solution.
How to troubleshoot missing network connections icons in Windows Server 2003 and in Windows XP
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
"Network connection was reset" on attempting to subscribe to podcast
I tired to subscribe to podcasts tonight, and none of them work. When I click any of the 'subscribe' buttons, I get the error dialog reporting the following:
*We could not complete your iTunes Store request. The*
*network connection was reset.*
Make sure your network connection is active and try again.
Here I am posting to this forum, so there's nothing wrong with my network connection. What gives?
Update: Results of iTunes Diagnostics (Network connection only)
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer P5E-VM HDMI
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 6FD222D38545230E
Current user is an administrator.
The current local date and time is 2008-10-16 22:39:39.
iTunes is not running in safe mode.
Video Display Information
Intel(R) G35 Express Chipset Family
Intel(R) G35 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {48186A66-5926-4316-BF18-6A5FA169A05B}
Description: Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.0.108
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Wed Oct 15 06:55:08 2008
Lease Expires: Wed Oct 22 06:55:08 2008
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-10-16 22:36:35.
Message was edited by: aggiebenI was unable to download episodes from a season I purchased. It kept giving me the same "connection has been reset" error message. But I went and clicked on support under quick links in iTunes and it allowed me to start downloading from that screen. I didn't have to go into anything, it just automatically popped up that I had items to download and asked if I wanted to download them. I clicked on it, it prompted me for my password, and then started downloading them instantly.
Maybe you are looking for
-
AIR 3.0 Application Built in HTML/Javascript VERY SLOW on Windows 7 and XP
Hello AIR Team, The commercial AIR application I'm developing for a client (using HTML/CSS/Javascript) is VERY SLOW on my Windows 7 (64 bit) and Windows XP machines running on the Adobe AIR 3.0 runtime. I notice the poor performance in all aspects of
-
Error message when trying to buy converter
I´ve trying to buy the PDF converter, but every time the system send me ti "my cart" I receive an error message saying that my location is not correct
-
aMy iphone is frozen with a itunes icon and the of a usb cord attached, How can I get my iphone to work again ?
-
Painel with Zoom Effect..
I have a sample application where when the user clicks a button i instance a new component based on a panel and add an "addedEffect" to this painel to this zoom tag <mx:Zoom zoomHeightFrom="0" zoomHeightTo="1" zoomWidthFrom="0" zoomWidthTo="1" id="zo
-
Hi all, What configuration to be done to access the webdynpro component from anywhere in the world? let me know in detail. Thanks in advance Pon