Canon iP1700 on PC problems

I have my Canon iP1700 printer connected to my PC running Vista and i have enabled printer sharing enabled but when i bring the printer menu it does not show up on my mac any help?

The first thing is to ensure that both the Mac and Vista are on the same IP subnet. Th subnet is typically the first three sets of numbers in your IP address.
The next thing is to check that both computers have the same workgroup name. Windows will usually be defaulted to workgroup unless you changed it during the installation of Vista. The Mac will not have anything set by default, so if you open your network settings and select the WINS tab, you can select or type the same name.
With the subnets and workgroup name correctly set you should be able to select to add a Windows printer and see the Vista box after selecting the appropriate workgroup in the list. If you still do not see the PC after setting the above correctly then please reply.
Pahu

Similar Messages

  • Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems

    Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems
    Pomoc - uakltualnienia - brak dostępnych uaktualnień
    wersja camera RAW - 8.0.0.137
    not reading raw's from 70D

    so, now after following the linked instructions...
    1. I'v installed  ACR 8.4 and it's opening the RAW files from 70D, but in camera profile I have "matrix"
    in case with 60D RAWs ther was portrait, landscape, etc...
    2. The step wit installing the DNG converter I download the DNG converter 7.4, 8.1, 8.2, 8.3. - the reason is to add in the system camera profile that I want
    every one of them do not install - just nothing happen after doubleclick (!?)
    only one that  install and run it's 7.1 which dont support 70D RAW files....
    it's amazing how to put all this to work propertly
    any ideas?

  • Canon iP1700 -- Leopard -- bad mix

    i have a Canon iP1700 attached to my airport express and i used to print on it via Bonjour. it shows up now in Bonjour, but I tried adding the printer and get Error 9672. huh?
    i just now downloaded the printer driver and installed it. my computer restarted and i get the error 9672 instead. Que Pasa?
    I can find this error associated with HP printers, but not with my model. In fact, my model doesn't show up here on the forums. I'd love to print wireless again.

    If you upgraded from Tiger with the iP1700 still installed, you will need to delete the driver and reset the printing system in Leopard. Then you can add the printer again using the v5.8.3 that is included with 10.5.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

  • Canon iR 2530 driver problem

    Hello at all...
    we have bought a new printer Canon iR 2530 but our IT-man can't get it installed.
    We have a Windows Small Business Server 2011 Standard 64bit operating system.
    He has tested several drivers here:
    imageRUNNER 2530
    The printer can be seen in the network and you can install at client. If you give a print order to the printer, the client says ok too. In printer spool the order is seen but it doesn't print.
    Our IT-man says this is definitely a driver problem.
    Can anybody of you here help us, please...

    Maybe this thread will help:
    https://discussions.apple.com/message/23873672#23873672

  • Canon G9 CR2 File Problems

    I'm running into some troubles with this combination of CR2 files from the Canon G9 and using Lightroom 1.3 or Photoshop CS3.
    When I import the files from the camera using Lightroom's import function (and yes, I have the 4.3 camera raw update installed), Lightroom brings over both the .jpg and the .cr2 files (so far, so good) but then I run into problems.
    First problem: The .CR2 files have improper white balance set on them. catastrophically so, as I'm using the camera for infrared shots and without the original white balanace settinsg taken at the time of shooting the shot is useless. The .jpg's are fine, but obviously lack the full details of a raw file, which I would prefer to work with.
    Second problme: When I right click on the .cr2 image in Lightroom and choose to edit it in Photoshop, the result is that Photoshop opens the file as a Tiff image and I never get the opportunity to use the Camera Raw loader settings for the raw image in photoshop, which are fairly important to me.
    Third Problem: If I open the image directly in photoshop, it will initiate the Camera Raw 4.3.1 loader (a good thing) but still has the color balance issues. And for an instant when the file loads in camera raw 4.3.1, a triangle warning sign shows in the upper right corner of the picture then dissappears. I have tried using the Adobe RGB, Colormatch, ProPhoto and sRGB settinsg, 8 and 16 bit, all to no avail, I still lose the white custom balance as shot.
    Any help on this would be very much appreciated, I've thus far been totally unable to work with raw images from the G9 regardless of what versions of the various software and tools I have loaded.

    Hi, thanks once again for responding.
    My dilemma is that the final results of an artifically induced white balance through channel switching won't give the same results as the false color image produced when the original white balance is done on-site using the non-IT filtered color metering system of the camera. It can give an approximation, but it will lack in a great many nuances.
    IR images taken using the Canon G9 produce correct .JPGs, but the processing of the CR2 files by camera raw is flawed in the way that it is handling the white balance settings in the CR2 it seems. Images produced by other camers such as our Nikon D80 or others that use formats other than CR2 come through perfectly. Only the CR2 images are incorrect. This may be linked to the use of custom white balances instead of standard white balance settings, perhaps something in the file contents identifying which white balance (the camera has approximately eight) is being used and should be processed. Or perhaps the file itself is being incorrectly produced by the camera. Who know, eh?
    I know the CR2 format in the G9 is relatively new and full support will come in time, but I'd hoped that it was some obscure setting that could get us back on track. In the meantime, we are using the .JPG images from the G9, which come through correctly processed. But this is sub-optimal, and one of the primary reasons for settling on the G9 was to have the raw images. Afetr all, how many 12MP compact cameras out there produce raw image files, eh? :)
    If nothing else, perhaps this conversation will prompt some research and eventually correct processing of CR2 will emerge.

  • Canon Log and Transfer problem

    Hello all,
    I'm trying to upload some HD files from my Canon HF20 on the latest edition of FCP to my iMac 10.58 and running into a problem.
    FCP recognizes the video captured on the internal memory. However, it does not recognize the video captured on the SD card in the camera.
    Any ideas?

    Well, I'm connected to my iMac using a USB. (iMac is running version 10.58 of Leopard). I'm using the latest version of FCP 7.0.2
    I can log and transfer files "taped" to the internal memory of my HF20. Files show up fine and import fine.
    However, the files that are on the SD card in the camera don't show up in the Log and transfer. ( I put the SD card on a card reader and still no luck.)
    I put the card back into the camera and hit the "Add volume" on the top left of the log and transfer and I can see my Canon drive and the other drive which is called "No Name" (I'm assuming simply because I haven't named it anything) I'm also assuming the No Name Drive is the SD card. However, I may be wrong. All the files are grayed out on this drive.
    Not sure what else I need to add to give you more info. Let me know if what other info needed and I'll post it.
    Thanks again!

  • DNG 4.2 and Canon G9 raw CR2 problem

    I have been unsuccesful getting the 4.2 DNG to convert the CR2 Canon G9 files, getting an error message that the file type is not supported. Running Windows XP Home. Any ideas as to how I can fix this. Thanks, Jeff

    I just helped my friend with the Canon G9 Raw file won't open and recognized on Mac Computer.
    Problem when try to open or drag the Raw image (*.CR2 File), I got an error message says the file type is either not supported or corrupted, also the file in the browser are all grayed out, means can't click & select & open. So I re-install the software just to make sure the software is fine.
    The software comes with the camera is easy to install, here is the thing I was stumbled but figured it out.
    1. Use browser to find the raw file.
    2. click to select the file
    3. go to Menu Bar under "File" there is a section you'll see "Process Raw File" or something like that, then you are done, from there you can edit and open a Raw file.
    My impression towards to the raw image quality and canon software: The software interface is not as nice compare to PS Element 4 Raw Plug-in, especially there is not button for "Processing Raw" on the browser window that you have to go to File >.. , I hope this is just for Mac users or I have to say the software is silly.

  • Canon Selphy CP720 Network Problems

    I just dowloaded the new CP720 driver for Leopard from Canon. When I tried to add the printer via bonjour (it is connected to my PC), I can select the printer but the driver doesn't come up.. it asks me to select from the list (it is not in the list)... or choose "other". In the other menu, I go to \library\printers\selphycp but none of the items in any of the directories seem to be what i need. If I connect directly, it finds the printer and driver with no problem. Has anyone gotten this to work? I cant even tell what the driver file should look like, though most are grey in the list anyway.
    Any help would be appreciated. I thought of connecting to my time capsule but i don't want to waste my time just to have the same thing happen.

    Hello Mr Kay,
    From reading your posting I am not sure of your setup. If you have the Selphy connected via USB to the Windows computer, and wanted to connect to this share from your Mac, then you would need to use a Gutenprint driver rather than the Canon driver. Looking at the supported printer list for v5.2.0rc1, the ES20 is listed as a supported model, so you will need this version if the above is your setup.
    Once the driver is installed on the Mac, you can open System Preferences > Print & Fax and select to Add a printer queue. Select Windows and browse for the share on the PC. After selecting the share name, then open the Print Using menu and browse for the 'Canon Selphy ES20 - Gutenprint + CUPS v5.2.0'.
    If the printer is not connected to the Windows computer, then please describe your current setup - or the type of setup you would like to have.
    Regards,
    PaHu

  • Canon IP1700 network connection to a windows pc how to?

    I have a windows pc with an IP1700 connected to it, I want to allow my macbook to network print to the printer,
    The macbook can see the ip1700 just fine, however, I does not have a driver for it.
    I downloaded the diver for osx from canon, its not a driver but an install app. It works fine if i have the ip1700 connected direct to the mac, but when network connecting when its connected to the pc it demands a driver and I can not locate the driver file on my mac, I have tried to look in the package contents, no go. I looked in the printers folder of my home folder, no go. It will not work with a generic postscript driver. Im screewed.
    Help!!!
    Thanks

    Ok, i got this to work by going to
    www.printfab.net
    I install the printfab application which has support for the ip1700
    You can check and see if they have support for your printer.
    Once its installed, you can use the windows printing tab to select your shared windows printer,
    then go into the driver list and if your printer is supported it should be in there.
    Please note you dont actually runt he printfab app, you just use the drivers that it installed for you for the printers it supports.
    Hope this helps.

  • Downloading raw images from Canon Rebel XTi and problem with Border FX

    Aperture no longer downloads raw images from my Canon 400D / Rebel Xti and installed Lexar Professional UDMA card. I am able to download images to my Dell laptop. This is a new phenomenon only occurring since about 10 days ago. I am currently able to download images from my Canon 5D.
    Also, my computer has locked up 4 times today when I have been starting Border FX. I have seen a screen saying that I have to restart my computer by holding down the on button. I have the most recent version of the Border FX software.
    Any suggestions please?

    Join the crowd! I just started to experience exactly the same thing on both of my systems. Apparently the latest raw camera drivers broke something related to Canon Rebel cameras. I'm using the Rebel XT.
    I tried a quick experiment the other day. I shot a bunch of test photos forcing the camera to store them as JPEGs. I was able to download those without a problem. I then forced the camera back to raw mode and shot a few more pictures on the same memory card. The JPEGs that I was able to download previously no longer will download and neither will the raw files.
    I tried reverting to the older camera raw driver on my notebook but for some reason it won't let me do that. I haven't tried reverting on the desktop yet.
    Hopefully this problem is fixed quickly. I've got a ton of pictures from a recent vacation I'd like to off load.
    By the way, this affects the iPhoto, Aperture and Image Capture apps.

  • Canon 5D MKIII - autofocusing problem

    :-)It will only autofocuse in A+ and NOT in any position. I´ve tried with my 24-7mm and my 100-400 mm origianl canon lenses.
    What is wrong?? The camera is brand new  Comming from a 40D.. Have I missed something in the menu? and a upgrade to latest firmware didn´t fix  the problem..
    Does anyone has a solution?
    Thank you in advance..
    Solved!
    Go to Solution.

    To change you go to C.Fn2 menu (the 2 of 4 menu with the Orange Camera symbol) the go to "Custom Controls".  The first one is the Shutter butt. half-press, choose AF On and Metering.  I'm surprised that "Clearing All C.Fn" didn't work but then I never had to use it yet... .  Please let me know if this solves your problem.

  • Canon MF 4412 printer problem fixed

    I got a problem on MF4412, the canon 4412 is connected the newest airport extreme , it get configured. But I got same problem described about on my leopard, lion, even worst on iOS, it does not find the printer. But I got a Windows 7 starter NetBook ...haha it works, I can print it from Windows. what is the problem then,it works on Windows but not Apple's OS??????
    So it works on windows,it is really fixed.    Anyone from Canon or Apple could help fixing the problem on Apple's OS?????? help

    Canon has the MF ScanGear v1.30 for Mac OS X. With this software installed you can then set the MF Scan button online (showing USB Scanner or something similar) and then use either the MF Toolbox application (included with the driver) to scan or use Preview to scan your document.

  • Canon 7D workflow - any problems?

    Hi everybody, we do have XDCam's EX1, but we are seriously thinking about selling them and switching to Canon 7D for the videos, as the picture quality is WAY better, and we are doing documentary shots (always on tripod)... Are there any problems with using 7D with FC7?

    The workflow has been established. Download the EOS Plug-in & go to town. The topic has been exhausted on this forum.
    Something else to consider though - for documentary needs - is recording time. The documentaries I've been involved in often require somewhat long interviews. We typically just let the camera run, stopping as seldom as possible. The 7D (& 5D, 550D) only records 12 minutes at a time (@ 1920x1080). Personally, I would hate to have an interviewee be in the middle of a heart-felt story and be forced to ask them: Can you say that all over again - my camera stopped recording. Whether you tell them the camera stopped, or not, is irrelevant. However, expecting them to perfectly re-state their thoughts with an emotionally identical delivery is wishful thinking. I don't know if this is going to be a consideration for you or not. But it might be something to think about.

  • Canon ip5200r wireless printing problems with Airport Extreme

    I have been been printing from my iBook G4 (OS 10.3.9) using my Canon ip5200r connected to my wireless network for a couple of months without any problems. Yesterday it stopped working. When I called Canon for support, they say the problem is that my Airport Extreme is assigning different IP addresses to my computer and printer despite both being on the same network. I am not sure if it is relevant but the only recent change in my system is that earlier this week, I had a new high-speed internet modem installed. Can anyone help with this?
    Thanks!

    Attached to the airport USB port I have
    an unpowered hub with both a 500G disc and an HP deskjet 940c printer.
    Why is that? power power power try it see what happens.

Maybe you are looking for