Canon ir 2420 ufrii LT network printer show only processing but print not receive

My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share ,  Thaks for you support  

I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries)

Similar Messages

  • Printer shows an error but printed the pdf

    Hello everyone!
    I have a very annoying problem with my Adobe Acrobat Standard.
    Whenever I print a pdf, I get the pdf I wanted but the printer in the lower right corner of the screen does not disappear.
    It says that their is one document that still has to be printed. And if I open the printer dialog there stands: Error - Printing and the symbol on the screen does not disappear till I cancel the printing job.
    I had the same problem two weeks ago. And because it was so annoying I set up my whole windows system.
    After that the printer worked for two weeks without errors.
    But now it is the same problem as before. And I'm really getting crazy.
    How can I solve this problem without setting up the whole system again?
    The problem is that I can't only uninstall and the reinstall Adobe Acrobat, cause it is part of the software of my notebook and therfore I have no CD of it.
    The problem appeared in Version 8.1.4. I have already updated to 8.1.5 but this made no change.
    I hope you can help me.
    Denise

    Sounds like the now "bog-standard" issue of the Adobe PDF printer using a port other than "*My Documents \*.PDF" or "*Desktop \*.PDF".
    Seen it many times.
    You didn't say whether you were using XP or Vista so check the appropriate locations based on your OS for the following:
    Look for your Adobe PDF printer in the "Printers and Faxes" section of the control panel.
    Check the properties of the printer, specifically the port it's using. (On XP it's right-click on the Adobe PDF printer, select Properties, Ports tab).
    If it's not either the My Documents or Desktop (one of them should be checked) that's your problem.
    If you DO see those two ports as options, check one of them and then select "Okay" and you should be G2G.
    If you DON'T see either of those two options the ports were not created during the setup (setup exited before the ports were created as part of a mess up in the MSI install routine) then you need to first close all dialogs, open Acrobat and select the repair option from the help menu.
    Hopefully that fixed it, but if your printer ports are not fixed after doing a repair you may have to do a little more work.
    Check this link for more in-depth info.
    http://acrobathelp.blogspot.com/2008/01/adobe-acrobat-8.html
    S.

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • Firefox will show in processes but will not actually open. Must force close and reopen in safe mode to run. Can not reset, freezes.

    Everything that I know is listed in the original question.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • P2035n not connecting to network, it show on it, but try to connected and it fail

    p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then  cant connect to it no, even after reinstalled. it looks like the printer is shut out.

    I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!

  • Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" help any1?

    Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?

    Hi chelsinator,
    You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
    The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
    Cheers,
    GB

  • I have a HP Pavilion a1700n it shows updates needed but its not downloading them

    I have a HP Pavilion a1700n it shows updates needed but its not downloading them
    This question was solved.
    View Solution.

    There is a program that addresses this issue.  It's called System Update Readiness Tool.   Please select the correct version.
    The original specs for that computer was Vista 32 bit.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

    I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • I have Firefox 4.0 Beta 6 on my system and Beta 9 was installed, now both are oon desktop neither show on Start menu and Add/Remove list only shows Beta 6 but will not remove it.

    Had a problem yesterday and Google chrome replaced Firefox as my default browser without my knowledge. I removed Chrome from my system and can use Firefox. I have two icons for Firefox on my quick launch toolbar one says Beta6 the other Beta9 but both launch Beta 9 but my Add/Remove programs shows only Beta6 and will not remove it. It seems Beta9 is the only version on my system but was not updated in my Start menu.

    If you updated from the beta 6 version to the beta 9 version then the beta 9 version has replaced the previous beta version. It can happen that the uninstall registry key of older versions isn't updated or removed and that seems to have happened in your case. So you have only the beta 9 version installed and an orphaned entry to uninstall the beta 6 version.
    If you are comfortable in editing the registry then you can remove that entry.Otherwise it is better to leave it.<br />
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox

  • Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie  . ...Where'd it go ?

    video transfer from computer
             Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie  . ...Where'd it go ? sync automatically downloaded some -  but was a bit prejudiced and selective with content mainly all edited by me in Moviemaker (windows 7, probably the reason)
             I use technology since neanderthals roamed the planet . ....don't quite understand  all the nuances  . .. .So, my all things "i" (apple/mac) guru has arranged a meeting,    and I'm impatient.  I know some of my videos are in several formats, etc... and I don't quite understand the differences . ...to me, it's complicated, as Alec Baldwin would say.
            Unfortunately, I'm "late" to the game metaphoricaly ( windows vs apple/mac ). I have a couple ipods and actually endorse the ijet remote device (Co. from San Diego). I have pro tools and other hi tech gear in the pro keyboards/sequencing arena where I've been writing computer music since 80's and it's evolution.

    The Apple video app is very limited in what it will play. If you have multiple video formats and if they will play on an iPad, then you likely need a 3rd party vidoe app. One such is BUZZPlayer which is available in the iTunes App Store on a Mac or PC or from the App Store app on an iOS device.
    You transfer the videos to 3rd party video apps using iOS File Sharing.
    http://support.apple.com/kb/ht4094

  • How can I reinstall deleted free Apps which now show as installed but are not actually there?

    How can I reinstall free Apps that I have deleted (because ALL stopped working) which now show as installed but are not actually there?
    I loaded a bunch of free Apps (maybe too many?) right after I got my 4s yesterday, and at some point I noticed that none of the downloaded Apps would work. The screen would blink when I tapped the icons, but the Apps stopped opening. Resetting the phone didn't help, so I decided to delete all the Apps I had downloaded and start over.
    I can get the "Purchased" list to show up by pressing Updates button (is there another way?) but the show as "installed" in greyed-out letter, so I can't figure out how to get them back.

    Your iPad screens aren't completely filled up are they? If they are, you will only be able to find them using the search feature on the iPad.

  • In my i cloud contacts show only 98 but in my i phone thay show 1400 . why thay not sync with i cloud,

    in my i cloud contacts show only 98 but in my i phone thay show 1400 . why thay not sync with i cloud,

    Welcome to the Apple Community.
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

  • HT201412 My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...

    My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...

    Jahnavi,
    two things to be looked upon in this case. First thing is about the battery. Once the battery has enough charge in it we can try a force restore on the phone to re-install the iOS.
    > Try a hard reset of the phone (Press and hold the HOME button and the Sleep/Wake button until the phone restarts and comes up with Apple logo). After trying this step, try charging the phone and see if the battery holds the charge.
    > Once battery has enough charge in it then we can force it to DFO mode and perform restore. For restore refer to this link.

Maybe you are looking for