Canon lbp 3300 printer not working

I have installed Canon LBP 3300 printer driver properly but not work since installed...

Try resetting the printing system.
Reset Printing System

Similar Messages

Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

Why is my Canon IPF 5100 printer not working on my new iMac intel

I just purchased a new iMac and within a few days, my IPF 5100 printer stopped working. I contacted Canon's service department and
they had no idea how to fix the problem. They said it was most likely a USB port problem. They mentioned that this problem was
occurring more and more often with the iMac's.
Well, the customer service person from Canon said they would call me back, and I haven't heard from them yet.
Hello Canon and Macintosh, my printer plays an important part in my photography business.
What's up!
Anyone else with a IPF 5100 having this problem?
Greg

Are you sure it's an IPF 5100, if so it's not supported by Snow Leopard per:
http://support.apple.com/kb/HT3669#canon

Canon ip5200r wifi printing not working

I have an old ip5200r canon printer.
It's been a pain over the years - each time i update my operating system i have had to update the drivers and fiddle around to get it to connect to my mac via wifi. USB printing is fine and always works.
With 10.10 however I am totally stumped. I have managed to connect the printer to the network, and the printers and scanners system preferences can see the printer and it tells me it is installed, but I am unable to print.
My partner often uses the printer and constantly complains about walking around the house and plugging a USB cable in. It should be so easy, I am unsure why canon make it so hard.
I was wondering if anyone could offer any possible insight or recommendation?

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Canon LBP 6020 printer & Yosemite problem

My printer Canon LBP 6020 does not work after installing Yosemite. I guess the problem is with the driver(Mac_CAPT_Ver366_uk_EN).I have tried to find new driver that goes with OS X Yosemite 10.10 (14A389) without any luck. Is there anybody who can help?

Thank you for supplying the information.
Your image shows that the driver being used is v2.05, which was not 10.8 compatible. The latest version of UFR2 driver is v2.43, so check the Canon web site in your region for this latest version of driver for this model.
After downloading the driver, delete the current printer/s in Print & Scan that are using the v2.05 driver. Then open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder. Then restart the Mac and install the v2.43 driver. When the driver has finished installing, then add the printer in Print & Scan.

Canon LBP 2900 doesn't work under Snow Leopard 10.6.3

Canon LBP 2900 doesn't work under 10.6.3.
It worked under 10.5.6, 10.5.7 and 10.5.8.
The installation process is described here http://discussions.apple.com/message.jspa?messageID=10723997#10723997
I did the same under SL but no result.
Any suggestion?

The procedure of using the CAPT folder from a previous version of OS X was not always successful with 10.5, let alone 10.6. For those like you that did find it worked, there were many others that found the workaround did not work for them.
Version 3.05 of CAPT lists the following Canon printers as supported models.
LBP9100Cdn
LBP7200C series
LBP5300
LBP5100
LBP5050 series
LBP3500
LBP3310
LBP3300
LBP3250
LBP3150
LBP3108
LBP3100
LBP3050
LBP3018
LBP3010
LBP3000
You may have more success with trying to get this driver to work with your LPB2900. At least this version has been written for 10.6.
If this new driver does not work with the LPB2900 then another solution would be to have an old Windows XP computer connected to the LBP2900 and then use the following procedure to print to it from the Mac.
http://iharder.sourceforge.net/current/macosx/winmacprinter/

Setting Canon LBP-810 printer on OS X (10.4.7)

I've just bought a Mac mini and can't set-up my Canon LBP-810 printer. The Canon website says that this printer is not configured for Macintosh. Is there any other solution than having to buy a new printer?
Mac mini Mac OS X (10.4.7)

I don't have experience, just referring you:
http://www.linuxprinting.org/show_printer.cgi?recnum=C
anon-LBP-810
I doubt very much if this will work in OS X. I got worried when the description of the driver on the linuxprinting.org page said -- "the driver talks directly to the USB port."
I took a look at the source code for this driver. The README that accompanies the source code states -- "device should appear (/dev/usb/lp0)". This indicates that the driver wants to send data to a raw USB device. This is not possible in OS X. I don't know whether the driver could be made to work in OS X. There appear to be other criteria in the README for setting up the printer that doesn't look like it can be made to work in OS X.
This is one for advanced users only.
Matt

Problem in Canon LBP 5910 printer in OS X 10.8.3, shows error: 20600

Hi I am using Macbook Pro with OS X 10.8.3, I am getting problem while printing from Canon LBP 5910 printer , the printer driver is installed, but while printing, process will get paused and show error 20600.
I have reintalled the printer but still the problem is not rectified.
Do any one has faced similar problem.
Thank you
Mohit

Thank you for supplying the information.
Your image shows that the driver being used is v2.05, which was not 10.8 compatible. The latest version of UFR2 driver is v2.43, so check the Canon web site in your region for this latest version of driver for this model.
After downloading the driver, delete the current printer/s in Print & Scan that are using the v2.05 driver. Then open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder. Then restart the Mac and install the v2.43 driver. When the driver has finished installing, then add the printer in Print & Scan.

Printer not working now in Maverick

Hi all. I suppose many will write on the same topic. Having installed 10.9 on my iMac I now find my Canon LBP 6000 doesn't work, even though it appears that the computer recognizes the printer as being connected. Does anyone have any inside information as to how I can get it going, or to revert to 10.7 if needs be?
Many thanks.

You have to tick the checkbox as shown below to make the red Download link appear.

Problem of canon Lbp 2900 printer with my airport express

I can install canon Lbp 2900 printer connected with my airport express, but when I print, it shows the communication error. but when I directly install the printer to my macbook through USB, everything works fine ,it can print well. Anyone can help?
and I followed the instructions below:
This is what worked for me...
The printer works with Mavericks using the new CAPT v3.65 driver available here: http://support-au.canon.com.au/contents/AU/EN/0100420705.html and the old Mountain Lion patch which is available here:
https://docs.google.com/file/d/0B7kZEfXZH5ZXOEt0R2NnNVpwdDQ/edit?usp=drive_web&p li=1
Go to System Settings / Printers and Scanners and delete your printer, then restart your computer. Install the new CAPT driver and restart your computer. Install the patch and restart your computer.
Go to System Settings / Printers and Scanners and reinstall your printer selecting Cannon LBP2900 (CAPTuk) driver from the drivers list
You should now have a working printer.
Good Luck

In crowded WiFi situations, everything will slow down. Based on your description.....it is what it is.
I've already controlled the usage of wifi-channels around and I'm using the one with fewest users.
You want to be the only user on a channel. Even then, users on other adjacent channels in close proximity will drag down the bandwidth/speed on the entire network.

Canon LBP 2900B printer

I am unable to use my Canon LBP 2900B Printer on my mac. Please help

You will need drivers from Canon. It appears that this model is for Europe not the USA. You can troubleshoot and download them here:
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP2900.aspx

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

Canon lbp 3300 printer not working

Similar Messages

Maybe you are looking for