Canon LBP 6020 printer & Yosemite problem

My printer Canon LBP 6020 does not work after installing Yosemite. I guess the problem is with the driver(Mac_CAPT_Ver366_uk_EN).I have tried to find new driver that goes with OS X Yosemite 10.10 (14A389) without any luck. Is there anybody who can help?

Thank you for supplying the information.
Your image shows that the driver being used is v2.05, which was not 10.8 compatible. The latest version of UFR2 driver is v2.43, so check the Canon web site in your region for this latest version of driver for this model.
After downloading the driver, delete the current printer/s in Print & Scan that are using the v2.05 driver. Then open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder. Then restart the Mac and install the v2.43 driver. When the driver has finished installing, then add the printer in Print & Scan.

Similar Messages

Problem in Canon LBP 5910 printer in OS X 10.8.3, shows error: 20600

Hi I am using Macbook Pro with OS X 10.8.3, I am getting problem while printing from Canon LBP 5910 printer , the printer driver is installed, but while printing, process will get paused and show error 20600.
I have reintalled the printer but still the problem is not rectified.
Do any one has faced similar problem.
Thank you
Mohit

Thank you for supplying the information.
Your image shows that the driver being used is v2.05, which was not 10.8 compatible. The latest version of UFR2 driver is v2.43, so check the Canon web site in your region for this latest version of driver for this model.
After downloading the driver, delete the current printer/s in Print & Scan that are using the v2.05 driver. Then open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder. Then restart the Mac and install the v2.43 driver. When the driver has finished installing, then add the printer in Print & Scan.

Problem of canon Lbp 2900 printer with my airport express

I can install canon Lbp 2900 printer connected with my airport express, but when I print, it shows the communication error. but when I directly install the printer to my macbook through USB, everything works fine ,it can print well. Anyone can help?
and I followed the instructions below:
This is what worked for me...
The printer works with Mavericks using the new CAPT v3.65 driver available here: http://support-au.canon.com.au/contents/AU/EN/0100420705.html and the old Mountain Lion patch which is available here:
https://docs.google.com/file/d/0B7kZEfXZH5ZXOEt0R2NnNVpwdDQ/edit?usp=drive_web&p li=1
Go to System Settings / Printers and Scanners and delete your printer, then restart your computer. Install the new CAPT driver and restart your computer. Install the patch and restart your computer.
Go to System Settings / Printers and Scanners and reinstall your printer selecting Cannon LBP2900 (CAPTuk) driver from the drivers list
You should now have a working printer.
Good Luck

In crowded WiFi situations, everything will slow down. Based on your description.....it is what it is.
I've already controlled the usage of wifi-channels around and I'm using the one with fewest users.
You want to be the only user on a channel. Even then, users on other adjacent channels in close proximity will drag down the bandwidth/speed on the entire network.

Canon lbp 3300 printer not working

I have installed Canon LBP 3300 printer driver properly but not work since installed...

Try resetting the printing system.
Reset Printing System

Setting Canon LBP-810 printer on OS X (10.4.7)

I've just bought a Mac mini and can't set-up my Canon LBP-810 printer. The Canon website says that this printer is not configured for Macintosh. Is there any other solution than having to buy a new printer?
Mac mini Mac OS X (10.4.7)

I don't have experience, just referring you:
http://www.linuxprinting.org/show_printer.cgi?recnum=C
anon-LBP-810
I doubt very much if this will work in OS X. I got worried when the description of the driver on the linuxprinting.org page said -- "the driver talks directly to the USB port."
I took a look at the source code for this driver. The README that accompanies the source code states -- "device should appear (/dev/usb/lp0)". This indicates that the driver wants to send data to a raw USB device. This is not possible in OS X. I don't know whether the driver could be made to work in OS X. There appear to be other criteria in the README for setting up the printer that doesn't look like it can be made to work in OS X.
This is one for advanced users only.
Matt

Canon LBP 2900B printer

I am unable to use my Canon LBP 2900B Printer on my mac. Please help

You will need drivers from Canon. It appears that this model is for Europe not the USA. You can troubleshoot and download them here:
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP2900.aspx

Driver for Canon LBP-3000 printer

to all,
i could imagine tha there would be no driver of the LBP-3000 available for mac...
i found a site, saying that there is a CAPT driver from a japanese canon's site. the problem is... the dirver fits only up to Mac OS X 10.4.4... the OS in my macbook is tiger...
what should i do???
thanks!

10.4.4 is Tiger. Current build is 10.4.6. Next one coming up is 10.4.7, so this driver is supported in Tiger.
From MacOSHints:
After months of frustration of having to use Virtual PC running Windows XP in order to print to the Canon LBP 3000, I've finally discovered that Canon has indeed (albeit silently to the whole world) released a CAPT printer driver that works without the ridiculous requirement of having to have the Japanese version of OS X installed. This is not the Linux CUPS version, it is the full LBP CAPT driver made by Canon themselves. Software support: 10.2.8 thru to 10.4.4 (in English)
http://cweb.canon.jp/drv-upd/lasershot/captusbmacx.html
It apparently works with:
LBP-2410 / 1210 / 1120 / 1110 / 1110, Premium / 1110SE, LBP5200 / 5000 / 3600 / 3500 / 3300 / 3210 / 3200 / 3000.
I've tested it with LBP3000 on 10.4.5 (directly and via Printer Sharing). The installer is in Japanese, and it quits all applications and requires a restart, and requires you to manually setup the printer using the System Preferences. After this mild digression, you have full printer functionality and setup options (including toner usage), all in English, and it's nice and fast.
My insanity has now gone, and I can now terminate that unnecessary relationship with Virtual PC for good!
PS: Japanese language skills are not required, just press the default button(s) when installing. If you're looking for an excellently cheap printer, I can now seriously recommend the LBP-3000.

New Canon Pixma MG2220 printer - install problems on Windows XP

I bought a new Pixma MG2220 printer and received it 2 days ago. I followed the instructions and installed it from the provided CD on my 10 year old Compaq S4020WM desktop computer upgraded with 1GB RAM and 1TB hard drive running Windows XP SP3.
The CD installation took a very long time to complete (maybe an hour or so) and things did not work right. In particular the My Image Garden software was very slow and sluggish to respond. So I downloaded and installed the latest drivers and software from the Canon website on top of the existing installation, which did not help. The My Image Garden software began crashing completely with an error message about a bad .dll file. After talking to Canon tech support on the telephone, the support tech admitted that this software CD was probably not compatible with my old XP computer. The My Image Garden software uses like 500MB RAM which is too much resources for my machine. So the rep had me uninstall My Image Garden.
At that point I decided to uninstall everything and start over from scratch because something was obviously not right. For example, the Canon MP drivers were using 755 MB RAM, which seemed much too large. Obviously things had not installed properly from the setup CD, in general. The date on the setup CD was 2011, so apparently it was 2 years old, and long out of date!?
So I uninstalled everything except the Canon registration and onscreen user manual. I also kept Windows Adobe RGB 1998 because I didn't see any way to uninstall it. I also uninstalled .NET 4 which the setup CD had said was necessary, as well as Microsoft XPS EP which My Image Garden had also told me was needed. Then I cleaned up my computer as well as possible with help of Revouninstaller and Ccleaner, which was necessary because things were very messy with many uninstalled remnants and incorrect registry entries. I feel lucky to have survived those tasks without having to reinstall my op system. It wasn't easy.
Then I installed the following 2 modules (only) downloaded from the Canon website:
MG2200 series MP Drivers Ver. 1.01 (Windows 8/8...        01/31/13    14.07 MB
File Name: mp68-win-mg2200-1_01-ejs.exe
This file is a driver for Canon IJ multifunction printers. You can install the following items of the software: MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
*My Printer Ver. 3.1.0 (Windows 8/8 x64/7/7 x64/...        01/07/13    5.12 MB
File Name: mypr-win-3_1_0-ea11_2.exe
This file allows you to easily change the settings such as the paper source settings and provides you with information on how to solve problems such as ink smudging.
I believe that's everything required to access all of the print, copy, and scan operations of this MG2220 printer. Based on my current understanding, I would classify everything else as optional. I use free Irfanview for editing and manipulation of images, which seems a satisfactory substitute for the other software.
I did not reinstall .NET 4 or Microsoft XPS EP, because apparently they're only required if you install the My Image Garden and/or Quick Menu modules. I also did not reinstall the Easy-WebPrint EX module which apparently only applies to printing with the Internet Explorer browser, while I primarily use Firefox, Chrome, or Opera browsers. And of course I did not reinstall My Image Garden nor the Quick Menu, which were so problematical originally.
On the bright side, the Canon MP drivers appeared to install correctly this time, using only 35 MB RAM (vs 755 MB previously). Also the Canon IJ Scan utility was reinstalled automatically as a part of that driver installation process. Those items have their own shortcuts. I found it useful to make one additional shortcut via Start > Settings > Printers and Faxes > "Canon MG2220 series printer", to allow easy access to all of the internal printer settings and variables. Like I said, I believe this is all that's required, in addition to some image manipulation software such as Irfanview. I deal mostly with documents and never print photos nor use cameras. Those who have large photo collections and/or cameras may need something like My Image Garden or Easy-PhotoPrint EX.
I previously used Lexmark printers for the prior 10+ years, where everything is controlled by software from the computer. I never had to use the buttons on the printer. That's obviously different with this Canon printer, which will take some getting used to.
I'm disappointed that there's apparently no way to enlarge or reduce the % copy size with this model. Is there? I also don't find any setting for lighter/darker when making copies. Is there? There are apparently no other enhancements or filters available when copying. Are there? Similarly, scanning seems remarkably unversatile with this model and I can't find any way to set a scan for ligher/darker or apply various enhancements/filters. Are there?
The printing seems OK, but I must still decide whether the very limited copy and scan options will be sufficient to my needs. I'm not sure yet. I might take it back for a refund and get something better, if I knew what was better. That's another research project. Suggestions?
Thanks for any feedback.

Thanks for your info but the MG5420 is more than twice the cost at my local Walmart and Staples stores.
I thought I was being smart to buy the MG2220 as a later model(?), but it looks like the prior model MG2120 has more copier and scanner features according to the online specs at the Canon website (see copies below).
For example the MG2120 allows 25%-400% reduction/enlargement when copying, while the MG2220 does not. Can you verify this?
Also does the MG2120 allow for setting copying to lighter/darker? (I don't understand that complicated technical lingo in the specs.)
Thanks.
Pixma MG2120
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds8
Reduction / Enlargement   25% - 400%
Copy Features   4-in-1 / 2-in-1, Auto Exposure/Intensity Copy, Face Brightener/Fading Correction, Fit-to-Page, Gutter Shadow Correction Copy, Image Repeat, Intensity, Multiple Copy: 1-9, 20 Pages, Photo Reprint, Preset Copy Ratios, Zoom
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Document Fix, Auto Scan Mode5, Gutter Shadow Correction, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"
Pixma MG2220
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds3
Copy Features   Borderless Copy, Fit-to-Page, Multiple Copy: 1-9, 20 Pages
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Scan Mode, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"

How do i install canon lbp 2900 printer

how do i install canon lbp 2900 printer

OS X- Printer and scanner software available for download
OS X Mavericks- Set up a printer

Cannot install Canon LBP 6000 printer to Mac OS X 10.9.4

Cannot install a new Canon LBP6000 printer to Macbook Pro OS X 10.9.4. The installation window says that my operations systems are not compatible, though the Canon LBP6000 specifies compatibility with OS X 10.4 and higher.
Any suggestions on how to complete the printer installation?
Canon imageCLASS printer LBP6000, OS X 10.9.4

In my case it reports:
Installation Successful
The software was successfully installed.
To use the printer driver, add the printer you are using.
You must be an administrator to install apps, and change settings. The new user you create when you first set up your Mac is an administrator.
Your Mac can have multiple administrators. You can create new ones, and you can convert standard users to administrators.

Yosemite Driver for Canon LBP 2900

Hi there,
Now that Yosemite has been installed and working well, I am left with a non-functional Canon LBP2900. On Mavericks, it worked well with the patch but seems it doesn't carry across to the new OS. I have reset my printer settings and re-patched the system as per Mavericks but no joy.
Any tips? or lots of printers going into the bin!!!
Regards
Jafar

Re: I can't use canon LBP 2900 in Yosemite 10.10.
Wanderer75
Oct 21, 2014 4:17 AM
Re: I can't use canon LBP 2900 in Yosemite 10.10.
in response to Thet Aung
I finally solved the problem.
1. Delete your printer in Printers and scanners preferences.
2. Restart computer.
3. Download and install the following driver (version 3.67 has just been released for Yosemite): http://support-au.canon.com.au/contents/AU/EN/0100420705.html
4. Restart computer.
5. Download and install the patch appearing at step 3 on this page: http://macdaily.me/howto/how-to-install-canon-lbp2900-on-mac-os-x-mavericks/
6. Restart computer.
7. Connect the printer with USB, add the driver in Printers and scanners preferences, select the appropriate driver.
8. Enjoy the rest of the day.
It works for me!!!

Problem while trying to use canon lbp 3050 help me please

Dear all,
I have a problem while using my Canon LBP 3050 printer for my Mac OS X ver 10.6.8
I already install the programme and add new printer into my system preferences , there is a connection to the printer Canon LBP 3050 and the programme installation is working, I think because there is no warning "unsuccesfully installment" .
But when I started to print , no respon at all but the printer status monitor showed that my printing job has been done. no pending works there.
so can you help me to solve this problem?
thank you in advance

Thanks for your respons.
I tried your suggestion and I relieve that it works. thanks.
but… there is another problem again …
why the result of the printing is just the up side. so the bottom side disappear. I already make sure that the ink is new.
I try to put it off and try again and again and… the result is still the same. print the up side only (just the first line from the whole document).
this is the driver version : 3.30
Here is the driver that I downloaded
http://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDkwMDAwNzcyMjEw&cmp=ACB〈 =EN
i think this one is the new one , isn't it?
I'm waiting for your respon again...
thanks a lot

Canon LBP 3010 with 10.6

Hi all,
I've got a problem with the Canon LBP 3010 printer running in 10.6.8. I tried some drivers (like capt 3.40, UFR II), but it seems it doesn't work. When I plug the USB cable in and try to add the printer, the mac recognizes it but the correct driver doesn't appear in the list. There are related LBPs but not the 3010. I actually wanted to run the printer with Airport Express. Does anybody have an idea what do do??
Thanks a lot!

Thanks for your additional information. Based on what you have done so far I think it would be best that you remove the CAPT folder and associated files from your Mac and start again.
The CUPSCAPT folder is located in Mac HD > Library > Printers > Canon. You can trash this folder. And if you don't have another Canon laser printer, I also suggest you trash the UFR2 and CUPSCMFP folders.
If you then navigate to Mac HD > Library > LaunchAgents, you will see a file called "jp.co.canon.CUPSCAPT.BG.plist". And since you installed the UFR2 driver, you will also see two other "Canon" files in this folder. Trash all of these files.
With all of these files trashed, restart your Mac and then empty the trash. Now you can install the v3.40 CAPT driver again and see if the CAPT drivers show in the Printer Software window.

Canon LBP 3000 not working on Mac osx 10.5.7

Hi guys.
I had to do a OS re installation and now my Canon LBP 3000 printer will not print. Files get into the print Que and say "stopped".
I have searched all the forums and downloaded the English driver, the Japanese driver, doe I don't know how many restarts and no success.
Has anyone had success with this problem?

Hi there.
I have a mate with the LBP3000 and got him to confirm he can print okay from his 10.5.7 to the machine - which he can. He is using the v1.70 Japanese driver.
You mentioned that you had installed an English and the Japanese driver for your LBP3000. Given that I couldn't find an English version for the LBP3000, I wonder if you have a driver conflict (note that the same v1.70 CAPT driver on the Canon Australia web site is for a different model - the LBP5200).
I suggest you trash the CAPT folder, located in Mac HD/Library/Printers/Canon. Then unplug the LBP3000 USB cable and run the v1.70 Japanese driver installer again. If you click on the correct buttons during the install the Mac should shut down and restart at the end of the installation. Once the Mac has started again you can connect the USB cable again and check that the printer has added. Once it has you can try printing.
PaHu

No canon lbp 5100 After installing lion

My iMac does not see my canon lbp 5100 printer after installing lion anymore. I have tried updating the drivers bud dat dit not work. It all works perfectly on my Windows laptop so theres nothing wrong with the hardware. Can anybudy help me?

If the iMac cannot see the LBP5100 when connected via USB cable, then this is not a fault of the driver or Lion but most likely a problem with the USB cable.
Open System Information (Applications > Utilities) and select the USB entry in the left column. The top right pane will show all of the USB busses on the iMac and if the USB printer cable is good then the printer will be listed under one of these busses.
Note that the USB printer cable needs to be connected directly to the iMac. If you have a USB hub or some other device between the Mac and the printer then this can cause failure.

Canon LBP 6020 printer & Yosemite problem

Similar Messages

Maybe you are looking for