Canon LBP6000 Laser Printer Troubleshoot
I've installed a Canon LBP6000 laser printer with the correct software and drives for Mac OSX 10.5.8, but the printer either won't connect, or simply won't print. Please advise.
ok guys finaly i have found reason for this .
FK3-1153-000---- CONTACT IMAGE SENSOR ASS'Y , I mean to say this lamp and strip was faulty ,We have replaced it and
printer is now functional...
Have Happy reading...
Similar Messages
-
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
Connecting Canon LBP9100cdn Laser printer via ethernet/wifi hub
I have connected my Canon LBP9100cdn Laser printer via ethernet through a modem hub. We can connect either through direct ethernet hard connection or wifi, on OS10.8.3. Occasionally it just stops finding the printer. Have latest CUPS driver, have reset printing system and reinstalled driver and reinstalled printer. Turned printer off and on. Sometimes it takes a few goes to get the right random sequence, but this time I just can't get it to connect. Other computers on the system, both ethernet hard wired and wifi can still connect- all on the same operating system.
When you get this lost connection, try opening Safari (or web browser of choice) and enter the IP address of the 9100 as the URL. This should connect to the internal web page of the printer. If this does connect, then see if you can resume the queue to print again. In theory, if the print queue on the Mac pauses, then the web browser test should also fail to connect to the printer.
-
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop.
I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options. So very open to advice.
Thanks
T.The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
With regards to the action to remove all printers, I would bet that you performed a reset of the printing system. -
Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac
Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac
HI wvpearson.
You can download the Mac OS X drivers for the imageCLASS D420 from the Canon USA website. Please click the link below:
imageCLASS D420 - Drivers & Software
Once you are at the site, your operating system will be automatically detected. Select DRIVERS and download the files listed.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). Have a good day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Were can i get the driver for Laser printer canon mf 8030 for os 10.8
I can not find the driver for my IMAC on the home page to Canon.
The printer is Canon laser MF 8030 cn. and i use the OS 10.8.2.Welcome to Apple Support Communities
http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/Laser/LaserBase_MF_series/i-SENSYS_MF8030Cn.aspx?DLtcmuri=tcm:13-961785&pag e=1&type=download -
Have installed Mountian Lion, now having trouble with my printer.. Printer is Canon LBP6000.. Does anyone have a driver I can use??
It looks like this page from Canon's website will take care of you (provide drivers, etc.):
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware -
I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?
I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.
-
Canon ImageClass c2100 Color Laser Printer and OS 10.6
Hi-
I have a Canon ImageClass c2100 Color Laser printer which, as I understand it, shares drivers and some parts with the HP Color LaserJet 8500. I have owned the printer for many years but it hasn't been used since we updated our systems to 10.6. We are on a wired Ethernet network with passive hubs and an Asante Firewall.
After firing up the ImageClass c2100 we do not seem to be able to print. I get the message "cannot connect to printer" or the print process just hangs up. I am looking for some step by step instructions for both the settings on the Canon printer and for the Mac print preferences. For example:
When adding printer:
LPD or IPP? My HP 4050TN works with this at LPD so thats what I have been doing on the Canon
What IP address do I put in there? I see the IP on the printer is set to 192.168.123.169 so I have been using that.
For the driver software I select HP Color LaserJet 8500 as I believe that this worked before.
On the Canon ImageClass c2100 I have the settings as:
TCP/IP - Ethernet - Set to YES
Enable Auto IP - Set to NO
Ethernet IP - 192.168.123.169
Subnet Mask - 255.255.255.0
Gateway - 192.168.123.254
Appletalk - Set to YES
If any of you out there are Mac and Canon experts I'd love a hand getting this combo running. Seems a shame to retire this old workhorse when she has lots of pages left in her.
Cheers.Did you confirm that the Mac and the C2100 can 'see' each other? On the Mac, you can open Network Utility and select the Ping tab. Here you can type the IP address of the C2100, set the number of Pings to 4 and then press the Ping button. If there is working path between the two devices then you should get 4 responses from the C2100 for each ping. If the results show something else then post those responses back here.
The other thing you can do is open Safari and type the IP address of the Mac as the URL. If there is a path between the two devices then this will connect to the internal web page of the C2100. If it doesn't show the internal web page then this also confirms that you have the Mac and the C2100 configured for different networks and this will cause the pausing issue.
If you do get a ping response, or can connect to the internal web page, then the pausing can be a result of the protocol you selected not being available on the C2100. As I mentioned before, for an LPD connection a queue name of print must be entered. But if the LPD/LPR setting is not enabled on the C2100 then this will cause the queue to pause. So you could try creating another queue to the C2100, but this time selecting HP Jetdirect-Socket for the protocol. While LPD can be disabled by default, RAW Port 9100 (which is known as HP Jetdirect-Socket on the Mac) is often on as this is the default protocol used by Windows - and it is important we don't upset Windows users ;-) With Jetdirect you will notice that no queue name is required, so all you need to enter is the IP address and then select Generic Postscript in the Print Using menu.
See how that goes for you.... -
HT3669 Canon laser printer LBP7750C and a Mac Book Air with OS X 1.8.4??
Hi! I have a Canon laser printer LBP7750C and a Mac Book Air with OS X 1.8.4, but I can't get it to function. After installning the printer, via Ethernet network (Apple Time Capsule) and IP-number, it seems to connects ok but can't print. Anyone has a solution or tip? Thanks!
One possible cause for your symptom is the printer driver you are using. If you have installed the Postscript (PS) driver but your LPB7750 does not have the PS kit installed, then this can stop a document from printing. So I would suggest you download and install the UFR2 v10.10 driver.
If you are using the UFR2 driver then the other cause for this symptom is the IP protocol. This driver and the PS driver must be configured using the LPD protocol. If you have selected IPP or HP Jetdirect when creating the print queue, then this will stop you from printing. So remove the printer from Print & Scan and add it again, this time selecting LPD for the protocol.
Another cause can be you have the wrong IP address. To check that the address is correct, type the IP address into a web browser. This will result in a connection to the internal web page of the printer if the IP address is correct. -
I am unable to use my Canon LBP 2900B Printer on my mac. Please help
You will need drivers from Canon. It appears that this model is for Europe not the USA. You can troubleshoot and download them here:
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP2900.aspx -
Since upgrading to OS X Yosemite my Canon LBP6000 has stopped working ???
- I have worked through all the Printer Troubleshooting suggestions from Apple Help ..... I have checked all the cords are plugged in, my MacBook Pro has been restarted twice, I have deleted the Printer and Added it again ..... ???
So annoying.....G'day Pahu .... thanks for having a go at helping me out ... much appreciated....
Now, I'm not sure if this is what you are after ????
Canon LBP6000/LBP6018:
Status: Processing
Print Server: Local
Driver Version: 3.55
Default: Yes
System Printer Sharing: Yes
Shared: No
URI: usb://Canon/LBP6000/LBP6018?serial=0000B1C43Ejl
PPD: Canon LBP6000/LBP6018 CAPT (UK)
PPD File Version: 3.55
PostScript Version: (3010.000) 550
(3010.000) 651
CUPS Version: 2.0.0 (cups-408)
Scanning support: No
Printer Commands: none
CUPS filters:
capdftopdl:
Path: /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
Permissions: rwxr-xr-x
Fax support: No
Printer utility: /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
Printer utility version: 3.55
PDEs:
FinishingPDE.plugin:
Sandbox compliant: Yes -
HT1695 I have Canon MG3250 air printer but I am unable to print from my I-pad, please can you help?
Please help me to be able to print from my Canon MG3250 Air printer from my I pad.
Your printer is AirPrint capable - make sure your iPad and the printer are on the same WiFi network.
Here's a guide that includes troubleshooting tips:
AirPrint Basics -
Looking for recommendations for a good small color laser printer
My trusty Canon inkjet is on its last legs and I am considering getting a color laser printer.
I need it to have ethernet so all computers on my home LAN can print to it.
I am currently looking at the Samsung CPL-315W and the HP Color LaserJet CP1518ni Printer.
Pros: Samsung is smaller than the HP
Samsung toner is cheaper
HP print quality is rumored to be better
Cons:
Samsung toner is more difficult to find locally
HP printer is more expensive ($309 compared to $199)
If you have any advice or experience with these printers, I would appreciate it.
Chris
Austin, TXhi cejones,
Did you end up finding a printer?
I'm looking as well. I have the Samsung clp-510 and while it's very reliable, the UI for mac is terrible. So terrible in fact that I still have it connected to a PC b/c their UI is much better for controlling colour etc..
i'm looking for a wireless solution.
Cheers -
Hi all,
I'd love to get your advice on what MFP laser printer to buy.
I need:
- Laser color PRINTING for a small business (+/- 1500 pages per month)
- SCANNING, preferably easy multipage scanning through the automatic document feeder
Optionally:
- 2nd paper feed tray
I think of buying the HP Color LaserJet CM2320fxi, but there seem to be plenty of compatibility issues with Lion (e.g. scan to network folder does not work on Lion).
I'd love to hear about success or failure of MFP on Lion from HP, Brother, Xerox, Lexmark, etc...
Thx for your advace,
S.I can recommend the Canon MF8380C. It has a document feeder that supports duplex scanning to Lion, either via Image Capture or Preview or 3rd party application like Acrobat Pro. You can also push scan documents from the machine by first configuring the scan settings using the Canon MF Toolbox that gets installed on the Mac.
The print quality is good for office documents, but not that accurate for colour proofing. It uses Canon's proprietary UFR2 v2.30 driver of which the Lion version of this driver is available from the Canon web.
As for the monthly volume, 1500 pages per month is the maximum recommended volume, so not sure if this would suit your business needs. It's recommended monthly volume is 800 colour pages.
Maybe you are looking for
-
BO Analysis for Excel – How to connect to SAP BW
Hi Gurus, We recently upgrade to BO 4.1 (from 3.1). And want to start to use Analysis for Excel. We are little unclear how to connect from Analysis for Excel to SAP BW 7,3. From Analysis select "Select Data Source" Then get a pop-up "Logon to SAP Bu
-
Can I share one itunes account with two computers?
I have an itunes account set up with one email address. It was originally set up on a PC and my two daughters have Ipods that are synched to this computer. I finally got my own ipod (yea!) and want to use it with my macbook. I tried to download songs
-
Customize IC WebClient Profile
Hi all, I started working on CRM 5.0 ICWC and i am facing some customization issue, I have copied BuPaMoreContactView.htm view of CRM_IC BSP Application into Z_CRM_ICW appln, In Framework Profile setting, I have maintained the Contoller Subsitute Z_C
-
Keys typing wrong letters and numbers?
I am using a usb wireless keyboard and i spilt a drink on it and then quickly tried to dry it off and pressed a few keys whilst wiping it, then i unplugged it, dried it some more then plugged it back in, although whenever i press the 'backspace' key,
-
Having downloaded Yosemite, I find that I can't enlarge the print on the Help pages. The 'Command +' keystroke doesn't seem to work. Anybody any ideas as to how to do it in the new OS X 10.10 ?