Canon LBP6000/Linux/Drivers/CUPS/Installation Problems/Help

I'm working on installing these drivers, http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_printers/imageclass_lbp... the "CAPT Printer Driver for Linux Version 2.60". My distribution is Arch Linux, and my print software is CUPS. I've been at it for a couple of days now, and am pretty familiar with with all the terms, variables, and commands; I think the main problem is that some of my command line settings and other random printer options/preferences are filled in with the wrong choices.
Anyone wanna help me sort this out?

Hi Suzanne,
I'm also based in Hong Kong with the exact same printer I bought from Broadway the other day. I had the same problem as you describe when I tried to install it earlier tonight, but now I've got it working.
Once you have the driver installed and the printer connected and turned on, open any printable document, then:
File > Print
Choose "Add Printer..." in the Printer dropdown menu
You will see LBP6000/LBP6018 in the box that appears. Ignore it. Instead, click on "More printers..." in the bottom left corner of the same box.
Another box will appear with a dropdown menu at the top, giving you two choices. Choose "CANON USB (CUPS CAPT)," which will give you the model number again. Click on it, then "Add," and voila!
Hopefully, this will save you the angst you will likely suffer from calling customer support (funny how that has become an oxymoron...)

Similar Messages

Lenovo Tablet 2 Installation Problems - Help would be GREATLY appreciated as Lenovo WILL NOT HELP.

Hi everyone. I've been pulling my hair out with this and I'm just about at my breaking point after 15 some hours of messing with this but I thought I would give it one last shot.
I have a Lenovo Tablet 2 that originally came with Windows 8 and later was upgraded via the store to 8.1. When I went to do a complete format and re-install it asked me for media. This product does not come with media. I figured the worst thing was that I would have to go the long way and install Windows without the recovery partition and reinstall all the drivers manually. Boy was I wrong. I booted to my UEFI enabled USB Windows 8.1 installer stick which was created using the new Mediacreationtool that Microsoft released to make either an ISO or USB stick. Knowing this is UEFI only (more on that later), I downloaded the ISO and created the USB stick using RUFUS. That booted fine and i blew away all the partitions and started the install. Install goes fine until the very last step and says "windows could not update the computer's boot configuration". The end. Game over. I can't get past this. I've tried the following:
1. Created a DaRT disc and did a complete clean of the drive
2. tried a Windows 10 Disc - same thing
3. Tried to edit the BCD using bcdedit command (more on that later) and nothing.
I've probably done a half dozen other random things and I'm still back at the same position here. The big issue with this device is that it is 32BIT UEFI only BIOS. Terrible to work with because everything considers UEFI to be a 64bit only function so there isn't much that I can even get to boot.
Back to BCD Edit. Anything I try to do just gives me the result of "The boot configuration data store could not be opened. The volume for a file has been externally altered so that the opened file is no longer valid.". I cannot createstore, edit the store, or do anything with it.
Again, i'm at wits end here. I contacted Lenovo and it's out of warranty so they told me to pound sand. I asked them just for a recovery media which every device should come with and **bleep** the OEMs for not doing that aymore and they told me to go pound the same mound of sand. Help would be GREATLY appreciated. This thing is slowly walking it's way to the trash can. It's a mental thing at this point now and I have to get this working. Please help. Thank you.

Yup, we had to do a clean install and same issue nothing will work after a stock clean install of windows 8.1 pro or 8 pro or 8n or 8.1n or any 8-1 for that mater we tried 6 loads with same issue on the IO file for the atom CPU Chipset...When you try to download the drivers from there site for the IO drivers and install it stop there and does not work with there Leveno drivers and if out of warentee they do not even care if there own leveno drivers for 8.1 do not work with 8.1 for the IO drivers on Leveno download site...When we called Microsoft they even sugest getting another tablet from another better supported MFG. WOW I own 4 Leveno products and almost got a new tablet a few nights ago but will not get any more leveno products till I research the issues they have with stock roms! Reinstalls should be much more friendly and updates should be listed correctly on the web site...They do not say it is a ported win8.0 frankinstien windows load when you buy their tablet. But they should say it is kinda windows 8.0 almost and that only there usb key will let you reaload the hack-up windows the tablet needs.

SAP Netweaver 7.02 Installation PROBLEM HELP

Hi,
Have the sapservices in the windows service?
The name should follow SAP.
If so, are they started?
Cheers,
Clébio

Hi there,
I'm also in the process of installing NW 7.02. A few thoughts:
1. What problem warning messages do you get early in the installation process?
2. The German version could be a problem. I also tried at first to instal in Win 7 Pro 64-bit GER (ok it was running with JRE 1.6.x )and gave up. Now I've got a new HDD with a clean new Win 7 Pro SP1 64bit US-EN instal with JRE 1.5_22 and everything is going very smoothly this time.
If everything fails with your Win XP instal and you don't have access to full Windows versions in English you could try downloading an evaluation version of Windows 2008 http://www.microsoft.com/download/en/details.aspx?id=8371
- if your system runs 64bit you can also use the newer 2008 R2 version. They are good for up to 180 days.
Good luck!
Disclaimer: I'm a total noob in SAP Netweaver
Edited by: simon.g on Aug 12, 2011 10:23 PM

Weblogic 6.0sp1, Cocoon2 installation problems, HELP

Hi,
I tried installing Cocoon2 with Weblogic6.0sp1 following the instructions on Cocoon
site -- when I start up Weblogic, I get the message,
<Error> <J2EE> <Error deploying application cocoon: Could not load cocoon>
The weblogic log file reports
"<Exception thrown while loading cocoon: java.lang.NullPointerException>".
Please help!
Thanks
Sushmita

Thanks. But I need instructions for Cocoon2 -- not Cocoon 1.8.1 I already have
C1 working fine.
Sushmita
Pen Friend <[email protected]> wrote:
Sushmita,
Try cocoon on WLS 6.1 SP1. I too had problems with WLS 6.0 SP2 and so
I downloaded WLS
6.1 with SP1 and cocoon ran like a charm.
Steps to install coocoon on WLS 6.1 SP1
(1) Download the cocoon 1.8.2 version from http://xml.apache.org
(2) After uncompressing the file make sure that you have /bin/cocoon.jar
and all jar files in the /lib folder.
(3) In WLS6.1SP1 under /applications create /cocoon and within this
/WEB-INF
(4) Copy /src/web.xml from the download to /applications/cocoon/WEB-INF
(5) Copy /conf/cocoon.properties into /applications/cocoon
(6) Copy /sample into /applications/cocoon
(7) Modify the web.xml so that you have
<param-name>properties</param-name>
<param-value>conf/cocoon.properties</param-value>
(8) In the classpath make sure you have the following jar files after
weblogic.jar file
<java_home>/lib/tools.jar
cocoon.jar
xalan_1_2_D02.jar
turbine-pool.jar
w3c.jar
fop_0_15_0.jar
(9) Access the cocoon servlet by hitting
http://localhost:port/cocoon/samples/index.xml
Sushmita Bhat wrote:
Hi,
I tried installing Cocoon2 with Weblogic6.0sp1 following the instructionson Cocoon
site -- when I start up Weblogic, I get the message,
<Error> <J2EE> <Error deploying application cocoon: Could not loadcocoon>
The weblogic log file reports
"<Exception thrown while loading cocoon: java.lang.NullPointerException>".
Please help!
Thanks
Sushmita

Zen Micro 5GB - Installation problems - HELP ple

Dear All
I am sure must have been asked before, so please bear with me.
Just bought a Zen Micro and cannot seem to install the supplied software from the CD. Keep getting a InstalWizard 6003 error message. Have tried restarting, deleting temporary files (even connevting to net) and still get same message.
Have tried to install then by copying files to harddri've and running from there but that fails.
What am I to do or have I a dud?
All suggestions greatefull recieved.
Andy

I was also thinking - how's your cd player on the pc - is it generally ok ?
try copying the files from the cd to your hard dri've and running from there.
Sometimes you can get -6003 errors if some of the source files are unreadable for any reason.
If that fails then i suggest downloading from creatives website and trying the install again incase you just have a dud cd.
Seeing as you've just got it i'll also tell you from my own experience......
I have a zen micro 5gb bought it about 3 months ago and had no problems with the installation but that was on a fully patched up to date winxp sp2 with 2Ghz memory.
I did have issues with the zen micro itself hanging but i upgraded to the 2..02 firmare beta and it has been happy ever since.

Final Cut Pro 6 on Mac OS Snow Leopard installation problem HELP!!!

After 2 - 3 hours of installing all 10 FCS 2.0 discs and Software Updates, I can't seem to launch Final Cut Pro 6.0.6. I get *"...software maybe damaged or not installed.."* So I removed all of them and only custom-installed Final Cut Pro 6.0.6. It works with no problem!!! Then I custom-installed Soundtrack, Motion, DVD Studio Pro etc..., I can't launch Final Cut Pro 6.0.6. again! What the **** is going on? I get that "damaged" warning and Final Cut Pro icon is replaced by missing application icon.
My Mac Pro also has _Pro Tools 8 LE_ with _003 Mixer Rack connect to USB_. That's it. No other application. You think this is maybe causing the problem?
Anyone having similar problem?

https://discussions.apple.com/docs/DOC-2494
Carbon Copy Cloner is pretty simple to use. If you have any questions, post back or read the documentation. As I said in the user tip, test your clone after you make it to be sure it is bootable and your apps work.

Tiger Installation Problems ~help please~

I have the DVD that says:
MAC OS X TIGER
Includes Xcode 2
CPU Drop In DVD
i wiped my hard drive on my G4 dual 450 (using disk utility)
i put the DVD in HD and turned the computer on
i clicked on the 'continue & agree' buttons and the next screen
it says that i needed to have 10.3 in order to install 10.4
ummmm why?
please help. need to get up and running for work..... DOH!
thanks to everyone
G4 dual 450 1gb ram / 80gb hd / 30gb hd

"DOH" is right! "Wiping" your hd before even making a back-up is not the most highly recommended method of proceeding with an upgrade or update! Nevertheless, there you are and you need help, not a sermon...right? So, do you have the disks that came with your computer (or whatever version you have other than the 10.4 disks)? If so, you can re-install whatever version of MacOS you started with. The disks you are attempting to use for the upgrade to 10.4...are they gray by any chance? If so, they are "OEM" versions and will not allow you complete the install on any computer other than the one they shipped with. You need to buy the retail (full) version of 10.4. Then you can either perform an Upgrade or a "clean Install" as you wish.

I-Tunes 10.7 installation problems - Help

I am getting an error message every time I try to install the latest upgrade of Itunes. I am installing it from my desktop after downloading it from I-Tunes It isn't a numbered message. Simply says "There is a probelem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your suppor personnel or package vendor." Any ideas? Should I remove I-Tunes from my computer before installing this?
S

You're welcome!
We're a user-to-user community, so there's no guarantee that an Apple person will see your concerns here. If you're so inclined, you can give feedback directly to Apple using the product feedback form for Apple. Here's a link to that:
http://www.apple.com/feedback/itunesapp.html

Linux on Oracle: Installation Problem..Odd!!

I am trying to install oracle 8.0.5 DB server on my RedHat5.2 box
with all the necessary rpm install like gcc, cc,lib etc.
I am running the orainst from the har disk, I answer all
questions and then
I see the graph bar appearing and oracle getting installed.
However,
when I get to the point where it has to create the
ntcontab.o
I get the following O/S Error report:
Error during action 'Creating ntcontab.o'.
Command: make -f
hda4/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk ntcontab.o
>
(if [ "compile" = "compile" ] ;then \
/hda4/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /hda4/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /hda4/u01/app/oracle/product/8.0.5/lib ;fi)
/hda4/u01/app/oracle/product/8.0.5/bin/gennttab:
/hda4/u01/app/oracle/product/8.0.5/bin/get_platform: No such file or
directory
ntcontab.c:7: sys/types.h:No such file or directory
mv: ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
I also have the make install , when i type (for testing) :
make: *** No targets. Stop.
For the permission for oracle user, I have granted all type of
permission available. using linuxconf from redhat.
I would appreciate if anyone could give a hand with it. I am
stuck!!
Thanks you very much,
Victor Alamo
null

Victor Alamo (guest) wrote:
: I am trying to install oracle 8.0.5 DB server on my RedHat5.2
box
: with all the necessary rpm install like gcc, cc,lib etc.
: I am running the orainst from the har disk, I answer all
: questions and then
: I see the graph bar appearing and oracle getting installed.
: However,
: when I get to the point where it has to create the
: ntcontab.o
: I get the following O/S Error report:
: > Error during action 'Creating ntcontab.o'.
: >
: > Command: make -f
: > hda4/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: >
: > (if [ "compile" = "compile" ] ;then \
: > /hda4/u01/app/oracle/product/8.0.5/bin/gennttab >
ntcontab.c
: > cc -c ntcontab.c ;\
: > rm -f /hda4/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: > mv ntcontab.o /hda4/u01/app/oracle/product/8.0.5/lib ;fi)
: > /hda4/u01/app/oracle/product/8.0.5/bin/gennttab:
: > /hda4/u01/app/oracle/product/8.0.5/bin/get_platform: No such
: file or
: > directory
: > ntcontab.c:7: sys/types.h:No such file or directory
: >
: > mv: ntcontab.o: No such file or directory
: > make: *** [ntcontab.o] Error 1
: >
: I also have the make install , when i type (for testing) :
: make: *** No targets. Stop.
: For the permission for oracle user, I have granted all type of
: permission available. using linuxconf from redhat.
: I would appreciate if anyone could give a hand with it. I am
: stuck!!
: Thanks you very much,
: Victor Alamo
null

Final Cut Studio Installation problem HELP!

Hi
Ive just bought Final Cut Studio and have a laptop G4 and a new G5.
I previously had FCP 4.5 in the G4 and updated to 5.1 with Final cut studio.
Then I installed the Final Cut Studio on the G5. Initially I got an error message: "Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
I continued installing the software which took around an hour to load all different parts of studio package.
I tried to open the various programs but when I entered the serial number I get a message "Licensing error, This application cannot continue because the licensing data is corrupt."
I get this error message even when I try to open Motion or DVD studio Pro which I didnt install on the G4.
The licence on FC studio states that the software can be used on 2 computers (one laptop and one standalone) but not at the same time.
So am I able to use the software on the G5?
Many thanks in advance
Shane
Shane
G5 Mac OS X (10.4.6)

This has been all over this and other forums.
Here's a post on this forum with the answer...
http://discussions.apple.com/thread.jspa?messageID=2361114&#2361114

Oracle Linux 6.2 Installation Issue

Basic Oracle Linux 6.2 installation problems.
There are two iso files supplied for the installation.
V29609-01.iso (install files)
V29610-01.iso (bootable disc)
I boot from V29610-01.iso and the setup files run fine.
I am then prompted to identify the location of the second disc.
I encountered a problem where my DVD drive door would not open to insert the second disc.
To work around this problem I created a partition on my hard disc to copy
the installation files for the second disc to.
I boot from windows 7 (my primary operating system) and copy the installation files from the disc
to the partition.
I reboot from V29610-01.iso.
When prompted to identify the location of the install disc/files on my hard drive
I selected the drive where I copied the files to and press <enter>
I receive a message that it cannot find the image disc there.
I shut down.
I boot from windows 7 and this time copy the actual disc image
V29609-01.iso there instead
I reboot from V29610-01.iso and repeat the same procedure.
It still can't locate the disc image.
(I noticed the boot disc always defaults to the following structure in its displayed path \image\image.img
for the image file that it is trying to locate)
I shutdown.
I boot from windows 7 and this time create a directory called image and
rename V29609-01.iso to image.img and copy it to the image directory. Still no luck.
Why can't it locate the disc image?
Thankyou

@ O.P.,
What are you actually trying to accomplish? Replacing your Windows OS with dual boot Linux? In the later case I recommend you to use VirtualBox and forget about the old-fashioned and obsolete dual boot. Of course your system must not be older than 7 years with a x86_64 CPU and VT-x or AMD-d option. Why do you want to install a 32-bit OS?
Anyway, the V29609-01.iso install DVD is bootable. You will need to burn the .iso disk image doing a raw disk copy, but not the content of the mounted .iso image or you will loose the bootloader. There is plenty of information in Google searching for "burn iso image". If you use Virtualbox you can boot right of the disk image file without burning a DVD.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

NVIDIA Linux drivers problem

Hey all,
I have a Dell Inspiron 1520 laptop with an Nvidia 8600M GT graphics card. I have tried installing Nvidia's latest linux drivers with their .sh installer from their site, but it seems that using any driver past 100.14.09 causes X to break. When I startx using a driver > 100.14.09 all I get is a white screen that slowly fades to a weird grey, or sometimes the colors get all garbled (ex. white, green, red all over the place)
I have no idea whats wrong, so right now I'm sticking with 100.14.09, but I'm just wondering if anyone has encountered this problem and what you did to work around it. I have had the problem on both Arch and Ubuntu.
Thanks

It'll probably be fixed in one release, then broken again in the next
Nvidia are bad at drivers. See forum for all the problems - lockups, black screen, white screen, striped screen, 100% fanspeed, corrupted textures. Every problem imaginable

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Satellite L750 - drivers installation problem

Hello good people of the internet,
I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
I actually have problem with more things.
My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
So I tried to reinstall the driver but the problem I described above appeared.
The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
And the last one, for about a month there are problems with the sound on my notebook.
First cracking of sound and then it stops working completely and I have to restart the computer.
Again, I tried to reinstall the sound drivers.
There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
Thank you

Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
>My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
>The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

Canon LBP6000/Linux/Drivers/CUPS/Installation Problems/Help

Similar Messages

Maybe you are looking for