Canon LiDE 110 error code: 5,202,52

i just got my brand new LiDE 110 scanner, and i installed the driver and everything was fine except for the error code 5,202,52 keeps showing up. i tried everything i could do, including reinstalling the driver over and over, however, it doesn't work.
my laptop is win7 64-bit home premium. im getting crazy, any one help?

Hi jakehues,
The 5,155,75 error is a generic communications error and unforutnately does not pinpoint the cause.  Please make sure that the USB cable that you are using is 6 feet long or shorter.  Also, please make sure that the USB cable is connected directly from the CanoScan LiDE 110 to your computer and is not connected to a USB hub or some other device.  Please disconnect all other USB devices connected to the computer and then attempt to scan.  Are you able to scan?
If not, please try temporarily disabling security software and then attempt to scan, as firewalls and anit virus have been known to cause these type of errors as well.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Canon MG5250 showing error code:5,202,54

    It was fine a day or two ago, still prints, but scanner is not functioning.
    Does anyone know how I can fix it? or is it a hardware problem?
    many many thanks

    This is a very common problem. I have a CanoScan 9000F and at least once every 5 attempt, I get error code 5,202,54. Sometimes the only way to fix it is to shutdown the PC and start again, sometimes I had to reinstall the driver: a lengthy process! I asked several time Canon to provide a fix but it looks like Help Desks are designed to prevent customers to submit requests to development team, so there was no way to have a patch. I wonder where is the value to have good hardware if the software to use it is so poor.

  • Scanning question with the Canon LiDE 110

    Hello, I am trying to scan pictures with the Canon LIDE 110 using Photoshop Elements on a PC. The Get Photos/  from Scanner in Photoshop works great when i have the image set to save as a jpg' but when i set preferences to scan in and save the image as a TIFF, I get a message that says "Software for this Device could not be launched. The device is not connected or busy" What can I do to be able to scan in and save a TIFF?
    Thanks, Walter

    Hello wtneary.
    Unfortunately, we are not familiar with some of the message you described.
    However, our MP Navigator program has the ability to save images in TIFF format.  Please visit the following link to download the program:
    http://www.usa.canon.com/cusa/consumer/products/scanners/photo_scanners/canoscan_lide110#DriversAndS...
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Drivers for scanner canon lide 110 under Lion

    Is anyone aware whether Canon released (or is about to release) new drivers for its Lide 110? With Lion the available software works ... part-time. Also I stiull do not know what piece of software is necessary to have the scanner operating: the download sectin at Canon has at least four drivers, but only insufficient info about their functions. Thanks in advance. Regards

    NukeShim,
    Could confirm that you're seeing the scanner, that is the LiDE-80 specifcally, under Image Capture in Mavericks, and that you can scan? Not showing up for me on a 2012 MBP running the latest 10.8.5 .
    I'd actually really be surprised if it would, since the LiDe-80 specifically was internally different from the rest of the LiDE series. Canon didn't write the original drivers for them, some 3d-party did. The drivers were weak MacOS 9 updates (filename limited to 32 chars, no unicode support). They were never updated for the Intel Macs, unlike most of the LiDE line. I know this because I corresponded with Canon on this in 2008. The last driver is  a PowerPC one from 2005, which officially supports up to 10.4 only, although IIRC it did work for me on 10.5 for a while after doing some manual installing.

  • Canon mp258 b200 error code

    i had a problem with my canon mp 258 error b200

    Hi guadaduque, thanks for posting!   In order to allow the Community to better help with your question, we'll need some more information from you.
    What exact computer operating system are you using? Once we have this information,  the Community will be better able to help get you up and printing again!

  • Ich habe einen neuen Scanner Canon Lide 110. Die eingescannten Documente kann ich nur als IMG Datei abspeichern. Wie kann ich die Datei als PDF Dokument bearbeiten?

    After installing new hardware ( Scanner Canon Lide 11o) I only have the oppertunity to save the dokument as IMG.Datei
    How can I transform it in a PDF Dokument for starting work?

    Hello,
    Please go through the following video to know how to convert Scanned Documents into a PDF File:
    http://tv.adobe.com/watch/learn-acrobat-x/ed-converting-scanned-documents-into-a-pdf-file/
    Regards,
    Anoop

  • CanoScan LiDE 110: error msg: "Canon MP Navigator EX has stopped working..."

    I have tried all the trouble shooting tips from the manual that I am able to understand how to do. Nothing seems to work. 
    Windows 7, 64 bit.  Brand new scanner, out of the box. 

    Hello Isecretan,
    The error you are experiencing may be related to the user account you are currently using.  Please try using the MP Navigator in a different user account or create a new account for testing purposes.  Perform the following to create a new administrative account:
     1.  Click Start and open the Control Panel.
     2.  Under User Accounts, select 'Add or Remove User accounts'.
     3.  In the Manage Accounts window, select 'Create a new account' at the bottom.
     4.  Create a name for the account, then select 'Administrator' and click 'Create Account' at the bottom.
     5.  The new account should be visible in the Manage Accounts screen.
    Once this process is complete, close all windows or programs.  Then log out of the current account using the Log Out option from the start menu, then log in to the new account.  Once logged in, attempt to scan from the MP Navigator on the new account.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon LiDE 120 Error message: "Cannot communicate with scanner for these reasons:"

     I've tried troubleshooting multiple times: - Uninstalled and reinstalled drivers- Returned and bought same model scanner- Tried different drivers- Tried different USB ports My computer build is:Intel i7 4770k16GB 1866MHz RAM Asus Maximus Impact VInVidia GTX 780Corsair RM550Windows 8.1 64bit  I don't know what I'm doing wrong. Anyone else get this? It's making me quite livid just trouble shooting it. I've read a lot of reviews on this on Amazon and other websites that says that this is plug and play for the most part. What am I doing wrong??

    I have CanoScan Lide 120, which was working perfectly fine on Win7, now that I have upgraded to Win10 it does not work anymore. I get an error 2,156,167. Have tried to uninstall the driver, found new one on official website, but it didn't help.Scanner makes noise, like it's going to start scaning, but then nothing happens. When I use the preview function, it actually starts scanning, but stops somewhere in the middle (at 7%, 18%, ...) My specs:OS Name Microsoft Windows 10 Pro
    Version 10.0.10240 Build 10240
    Other OS Description Not Available
    OS Manufacturer Microsoft Corporation
    System Name NEW-PC
    System Manufacturer ASUS
    System Model All Series
    System Type x64-based PC
    System SKU All
    Processor Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz, 3400 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date American Megatrends Inc. 0803, 7.1.2014
    SMBIOS Version 2.7
    Embedded Controller Version 255.255
    BIOS Mode Legacy
    BaseBoard Manufacturer ASUSTeK COMPUTER INC.
    BaseBoard Model Not Available
    BaseBoard Name Base Board
    Platform Role Desktop
    Secure Boot State Unsupported
    PCR7 Configuration Binding Not Possible
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale Slovenija
    Hardware Abstraction Layer Version = "10.0.10240.16392"
    User Name NEW-PC\Gašper
    Time Zone Central Europe Daylight Time
    Installed Physical Memory (RAM) 8,00 GB
    Total Physical Memory 7,68 GB
    Available Physical Memory 4,73 GB
    Total Virtual Memory 15,4 GB
    Available Virtual Memory 12,1 GB
    Page File Space 7,75 GB
    Page File C:\pagefile.sys
    Hyper-V - VM Monitor Mode Extensions Yes
    Hyper-V - Second Level Address Translation Extensions Yes
    Hyper-V - Virtualization Enabled in Firmware No
    Hyper-V - Data Execution Protection Yes

  • Canon Pixma mx452 error code 5011

    Hi,
    I bought my printer a couple of months ago and it worked fine. Until a few days ago it just broke down with a code error 5011...I came home turned it on and 'beep beep beep'. I am unsure what happened. I know I was running low on ink so I bought ink and was going to change it but the error occured whenever i turned it on. Now I'm unsure if I should return the ink if the printer is really broken...
    Please help...

    Hello admirenkiwi.
    To try and resolve this issue, please turn the printer off and back on.  If the error still persists, feel free to call us at 1-800-OKCANON for additional assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon MX860 repeats B200 error code -- brought it back to store , they couldn't fix it.

    Canon MX860 has error code B200, have cleaned and removed printer head
    code still blinks.

    Ref my MX860. So... I did NOT wash head or anything. I opened cover, shoved print head manually to left all the way. Rapidly pushed "on" button a bunch of times until unit beeped back at me with funny sounds and went completely dead... Well, before throwing out the second story window, I then rapidly, pushed "on" 5 or 6 times and noticed the print head moved to the right. I shut the deck and waited... and waited... the 'infamous' Canon 'I'm gonna print, no wait, wait, really, I am, in a minute, wait, wait, listen to my sweet sounds, wait, I'm fixin' to, wait". And then it happened! Everything got real quiet and my LCD screen popped up, looking totally normal. So far, it prints, copies and will send a fax. Try it, sure won't hurt, and it seems to have fixed mine :-)

  • Canon Scanner LiDE 110 Cannot communicate with scanner

    I have Cannon Scanner LiDE 110, it works perfectly fine last week until i try to use it again yesterday. now it just give me this message : "Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. Code:5,155,55." I'm using windows 7 64bit. i've been trying to disconnect and reconnect the scanner and restart my pc. but it not help. the scanner didn't even give me the sound signal when i connect it. 
    i've been trying to use the scanner in other computer but it just gave me the same result, there's no even sign it's been connected.
    i try to reinstall the driver but it ask me to connect the scanner to computer, i reconnect it and it's not detected by the driver installer.
    So, what's wrong with my Scanner? please help me, i really need it.. 
    ps: sorry for my bad english, it's not my native languange

    I have the same problem, but on my other computer under WinXP operating system Canon Scanner LiDE 110 with Canon MP Navigator EX 4.0 works fine.
    Support please help us!

  • I have just downloaded OSX Mountain Lion. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly. Application Specific Information: *** Terminating app due to uncaught exception 'NSInvalidArgumentException

    I have just downloaded OSX Mountain Lion 10.8.3 and installed it on my lap top. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly when ever I try to scan a document. Application Specific Information: *** Terminating app due to uncaught exception 'NS Invalid Argument Exception..."
    Please let me know how to solve this problem.

    LexSchellings wrote:
    According to www.roaringapps.com the MP Navigator EX does not run on Mountain Lion.
    There are different versions of MP Navigator available depending on the Canon device you have. And there are version of this app that do work on 10.8. So www.roaringapps.com would need to amend their statement.
    LexSchellings wrote:
    Instead I use Canon Solution Menu EX, which does even more for you than the MP Navigator. This Solution Menu runs perfectly on Mountain Lion.
    Solution Menu is just a front-end for other Canon applications. When you click on the Use Scanner menu and select Auto Scan, OCR or Attach To E-mail, MP Navigator will open.
    As for the OP, they can obtain the latest version of MP Navigator, which is 10.8 compatible, and the supporting scanner driver via this link.
    http://support-au.canon.com.au/P/search?model=CanoScan+LiDE+110&menu=download&fi lter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8
    And you don't need to uninstall an older version. The new version will overwrite.

  • HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

    Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

    Did you partition and format the flash drive first? See the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • My canon MP240 is giving me error code 5200, what do i do?

    my canon MP240 is giving me error code 5200, what do i do? there was a paper jam but i took care of it and im still getting the message. do i need a new printer?

    Hi bonzaiburger,
    If one or more if the ink cartridges in your printer are not low or out of ink, and resetting the printer does not resolve the error, the printer will require servicing to resolve the issue.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

    I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

    Make sure you have the right version...
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

Maybe you are looking for