Canon LiDE 210 insufficient memory with Lion

My LiDE 210 scanner which has worked in the past using OSX10.7 but it now says "insufficient memory" each time I launch MP Navigator EX 4.0.
Canon advised me to open MP Navigator and select 'View and Use', where it says 'Specify the scanned location', select a different scanner location to see if this resolves the issue. I am unable to do this as I get the "insufficient memory" message immediately I double click on the Canon software. If this did not resolve the issue, they recommended uninstalling and re-installing the latest drivers, which I have done but with no solution to the problem. I haved repaired permissions, checked printers in the library and there does not seem to be anything missing or conflicting. I cannot find any reference to TWAIN in the Library and finally the basic scanner functions are available using Image Capture.
Any ideas most welcome. Thanks

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Similar Messages

Problems with using Canon LiDE 210 and OSX 10.7.4

I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff

Canon lide 210 not recognized in yosemite. Latest driver downloaded

Since upgrading from Mavericks to Yosemite (10.10.1) I have lost capability with my Canon Lide 210 scanner and Jam XT bluetooth wireless speaker.
I have downloaded and installed the latest Canon driver to no avail. Any ideas? Both were working great before I upgraded to Yosemite.

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Will a CanoScan LIDE 210 scanner work with OSX 10.11 beta?

I am testing OSX 10.11 Beta release and happen to need a scanner. I am asking to find out if the CanoScan Lide 210 will work with this version of OSX?

Any luck? I upgraded to OSX 10.11 and sometimes it works sometimes it doesnt.

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft office 2008 and later work fine on Lion. Office 2004 is a PowerPC application. PPC apps are no longer supported and Lion does not include Rosetta, which was required to run them on OS X. I imagine the Epson / Canon software you are trying to use is the same. Check with them to see if updates are available.

Update Re: Using Canon LiDE 210 with OS X 1.6.8

Hello,
I've read some older threads regarding this discussion but they must be closed since I couldn't add a comment. So, I thought it would be best to open a new one. I apologize if I'm treading old ground.
Here's my setup: MacBook Pro (mid-2010), Mac OS X v10.6.8 Snow Leopard, Safari 5.1.2. I needed a basic scanner, did research and everything looked good, so I bought a Canon CanoScan LiDE 210 scanner. All I need is to be able to scan documents (minimal graphics) to the MacBook, preferably in PDF format. Not really interested in scanning photos etc.
I just want to be careful and would like some clarification, please. So regarding installation, I've gotten three "recommendations/methods":
1) With the purchased Scanner, included was installation CD with instructions.
2) Emailed Canon Support and was told to download the latest driver and the MP Navigator EX from their website instead.
3) Read and referenced Apple Support Article HT3669 , which has been updated recently - February 15th, 2012.
Now, step #3 is my preferred selection, since it comes from Apple Software Update and the article lists the LiDE 210 as supported.
I also noticed on the other thread (that I could not comment on), that PAHU commented:
I have the LiDE200 and it works fine with Image Capture and Preview. The driver was included with one of the Canon updates hosted via Apple and part of Software Update. Checking the [latest Canon update|http://support.apple.com/kb/HT3669#canon] hosted by Apple, the LiDE210 and LiDE700F are both included as supported scanners.
This sounds exactly what I want to do for installation and use (Image Capture and Preview).
So before mucking up anything, if possible, could someone please confirm the step #3 approach and the supporting comments. (PAHU ?! ).
The way it appears, step #3 seems like minimal hassle, straightforward, and the best way to go. Also, do I really need this "MP Navigator EX", if I have Image Capture and Preview? I would prefer to avoid as much third party SW as possible.
I apologize for the lengthy post and thanks in advance for the help!
DMerz

Nice to read that it is all working. In response to the questions;
DMerz wrote:
I would love to have Adobe Acrobat Pro but funds won't allow it. You mentioned TWAIN based (Adobe Acrobat Pro) and making PDF's. What is the difference in creating a scanned PDF file via Image Capture vs creating one with Adobe Acrobat Pro? Or another way to ask is, what does the TWAIN driver do that the ICA doesn't? I googled TWAIN but got lost pretty quick. Sorry if that is a dumb question...
A PDF created by Image Capture is not a text searchable PDF. It is basically an image file (it is usually a TIFF with a Postscript header). So if you wanted to locate some line of text on the page, you would not have the ability to do so. In contrast, a PDF created in Acrobat will be text searchable, as the software will do character recognition (aka OCR). So if you wanted the means to locate content within each document, then you should OCR the scanned document. An Acrobat Pro will do this on the fly as you scan the document. Using Image Capture, you would have to scan the document first and then use some OCR package to convert the scanned image.
For the record, MP Navigator has an OCR function, but it is not as accurate as Acrobat Pro's version.
DMerz wrote:
One last question (I think - ). I'm still running Snow Leopard OS X v10.6.8. but probably will go to Lion soon. It looks like the Apple Support Doc says that the ICA driver I got through SW update will work with Lion OS X v10.7, so will the driver "disappear" when I do the Lion upgrade, causing me to have to setup the scanner again?
The driver won't disappear if you upgrade. The ICA driver package available from Apple is for 10.6 and 10.7. But it is sometimes advisable to remove the printers and scanner in 10.6 before you upgrade, or at least ensure you have the latest versions available before the 10.7 update. Given that you have just done this installation then you have the latest drivers so there should be no issue with the scanner after the Lion update.

Canon MF8050cn won't print with Lion ?

Hi anyone,
I'm pulling my hair trying to get this new printer working with my Mother's new iMac and have failed for the past 6-weeks!
I have followed all sorts of suggestions found here and elsewhere - and none of which have worked!
The printer is connected directly to the USB port and I'm simply trying to add it using the Canon UFR II LT v2.3 driver but it never communicates with printer.
Seems like there is a fundamental incompatibilty between this printer and Lion?
any suggestions, I haven't resorted to a firmware update yet, but maybe I should be looking at this too?
This has been a horrible time wasting experience for both her and me.

One of the problems I have encountered with the UFR2 driver is that it relies heavily on a background service and if this fails to run it will cause printer issues. So the first thing to check is that this "UFR II Backgrounder" service is running on the iMac. Open Activity Monitor and scroll down the list. Do you see this service?
Also, I cannot tell from your post if you have managed to add the printer and that the issue is that it won't print, or you have not been able to add the printer. If you have been able to add the printer but cannot print, then open System Information and select the Printers entry listed under Hardware. In the top right pane will be the installed printers and if you select the MF8050, the bottom right pane will show information about the print queue. Can you copy this information and post it back here please.
Message was edited by: PAHU
Changed the model number from 8030 to 8050.

Acrobat X Pro V10.1.0 on Windows 7 32 Bit Prof -- insufficient memory with protection tools

Dear Acrobat X Users,
when executing the tools "Ausgeblendete Informationen entfernen" (eliminate invisible information) or "Dokument bereinigen" (clean document) from the safety and security section (in German: Werkzeuge->Schutz), as recommended by the Germin PC magazine c't in an article from this year, on large documents (some 10 to some 100 MByte), Acrobat X Pro stalls. Sometimes with the error message "Zu wenig Speicher" (too less memory), sometimes without any message.
Probably this can be reproduced by Adobe and then fixed with the next updates.
Regards,
Rückenlehne.

I don't have any comment on the structure of Acrobat, though I do not think it is a script. However, a lot of the actions are to use the TEMP folder for storage that is typically limited by Windows. As to possible work arounds, I am not sure. It might be that you could extract pages and work on parts, then put them back together. The problem with that is any bookmarks and such may be messed up. Keep checking back as some of the others may have some good suggestions for you. I would suggest to post an example, but 100MB is a bit large for a post.

Settings for canon lide 210

how do i set my scanner for scaning jpg photographs as my scaner automaticlly is scaning everything as a pdf

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Canon Lide 60 Scanner does not work on Mountain Lion

Hi! Is anybody out there who would know how my good old Canon Lide 60 would work with OSX 10.8? Canon says Mountain Lion ist not supported on this device. Anyone an idea what to do without buying a new one? Thank you!

I also was looking for a working driver for ML 10.8
i bought a new canon scanner Lide 110 it's working perfect.
I tried my old scanner( Canon Lide 60) or it should work with this installed canon driver
i'am surprised my old scanner, lide 60 is working min Ml 10.8.4
photoloader does not recognise it. But Vuescan does. i use Vuescan 9.2.21
so the Lide 110 software works on 10.8 en higher for the Lide 60

Canon Scanner LIDE 210

I have been using a Canon LIDE 210 scanner with no trouble for some time. Now sometimes the scanner light does not light up and I get several dark, or black, pages in my scans. I have re installed the software but it still happens
If I scan 5 or 6 pages I might get 2 good ones and the others black.
Scanner is about 4 years old. Do I need a new scanner ?
Joe Sullivan

Contact Canon support forum for help
http://forums.usa.canon.com/
This topic is far from "Windows 7 Hardware Compatibility " topic, because your scanner has worked for some time.
I am afraid the you have reached the end of life of your scanner and new scanner is an only option here. Hope this statement is not true one.
Rgds
Milos

ORA-04033: Insufficient memory

I wondering if anyone else has run into this issue before as I am finding this strange. When I try to increase the shared_pool or sga I get a ORA-04033: Insufficient memory error. Basically I am using a SPFILE and I am changing the values dynamically and my scope=both. Now, when I use a CREATE PFILE from SPFILE and change the same values in the PFILE and then start the DB backup, it takes the changes perfectly and now the changes I wanted in the first are all there, but the only difference is I am using a PFILE instead of the SPFILE.
What happened here. Why would the PFILE allow me to make the changes I needed when Oracle is telling me ORA-04033: Insufficient memory with the SPFILE. Also, on the server, we have 4gb's of RAM and the server itself only has one Oracle DB running on it, so I was surprised as to why I could not allocate more memory for the DB. The settings were:
shared_pool = 152MB
SGA=350MB
I wanted to go to
shared_pool = 512MB
SGA=1024MB
SPFILE failed, and with the PFILE it worked.
Any thoughts?

What's your Oracle version?
What's the command you used to change shared pool and SGA ?
shared_pool_size can be changed while database is running in 9i and 10g however you need to make sure there's free memory available to do the increase. The 'Free Memory' here is not your available memory on OS but the difference between sga_max_size and allocated SGA size.

What is the best A3 printer to use with Lion OS X 10.7?

Can anybody recommend a good quality A3 photo printer to run with latest Lion OS X 10.7? Apparently canon pixmas don't run with Lion - is this true?

If you have a Canon, go to > Canon U.S.A. : Lion
or > Canon Printer Drivers v2.7 for OS X
I'm not suggesting Epson, but my 2006 Epson Printer/Scanner works as expected in Lion using the Apple drivers.

Canon LiDE 60, Useless with Lion

Im on my way to the garbage dump with my Canon LiDE 60, then moving on to some other scanner aat the office supply store.
A whole night of no progress, including VueScan, the whole nine yards, yielded nothing.
Canon-shame on y'all for declining to update this driver, then fudging wy saying that its on the installation disk. Disks will be gone for saftware soon, if not already. Take some responsibility.
Saxoformer

I also was looking for a working driver for ML 10.8
i bought a new canon scanner Lide 110 it's working perfect.
I tried my old scanner( Canon Lide 60) or it should work with this installed canon driver
i'am surprised my old scanner, lide 60 is working min Ml 10.8.4
photoloader does not recognise it. But Vuescan does. i use Vuescan 9.2.21
so the Lide 110 software works on 10.8 en higher for the Lide 60

Drivers for scanner canon lide 110 under Lion

Is anyone aware whether Canon released (or is about to release) new drivers for its Lide 110? With Lion the available software works ... part-time. Also I stiull do not know what piece of software is necessary to have the scanner operating: the download sectin at Canon has at least four drivers, but only insufficient info about their functions. Thanks in advance. Regards

NukeShim,
Could confirm that you're seeing the scanner, that is the LiDE-80 specifcally, under Image Capture in Mavericks, and that you can scan? Not showing up for me on a 2012 MBP running the latest 10.8.5 .
I'd actually really be surprised if it would, since the LiDe-80 specifically was internally different from the rest of the LiDE series. Canon didn't write the original drivers for them, some 3d-party did. The drivers were weak MacOS 9 updates (filename limited to 32 chars, no unicode support). They were never updated for the Intel Macs, unlike most of the LiDE line. I know this because I corresponded with Canon on this in 2008. The last driver is a PowerPC one from 2005, which officially supports up to 10.4 only, although IIRC it did work for me on 10.5 for a while after doing some manual installing.

Canon LiDE 210 insufficient memory with Lion

Similar Messages

Maybe you are looking for