Canon Lide 30 and CS4 -- Not Working Correctly

I've read everything I can find here and still have not found a solution to the following:
I've moved from a G5 to a 2.66 Quad -- PowerPC to Intel. Running 10.5.8 and CS4.
File>Import does not list the Canon Scanner.
Have done everything I've read about:
Uninstalled and re-installed Canon Drivers.
Have Canon Plug-In in CS4>PlugIn>Import/Export
Have Twain from "Goodies" in same folder.
Repaired permissions.
Shut down and started up, again.
The scanner will work using CanoScan and I can set it to open scan in Photoshop.
VueScan works -- I'm using trial version as a test.
Can anyone get this to work through the Import menu?
Thanks.
This is driving me nuts.

the Cannon plugins are probably written for PowerPC. and the default is to not install the TWAIN.plugin its in the goodies folder.
Keep in mind Photoshop has no scanning ability, It uses the plugin to access cannon's stand alone software.
it seems a bit silly to tie up a $1000 application to use a $50 scanner. not many of us use Photoshop to scan with we all use stand alone software I just happen to use VueScan.

Similar Messages

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Clientless VPN and Java not working correctly

In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

Poser, Collada and CS4 not working...

I upgraded to CS4 for one reason only. The ability to paint directly on figures. So far I can't get my figure to open in Photoshop after having used the Collada exporter in Poser. Error message is, "The Photoshop 3D file format cannot Parse this file.
I can open .obj files exported from Poser but I need the Collada exporter for resizing the tiny Poser figures. This works in CS3, what's wrong with CS4?
Mimi

I'm sorry to be so long in getting back to you. I understand what your issues are, and I have had lots of problems moving 3D models from one program to another myself. Do you have any 3D program other than Poser? I'm actually not using Photoshop myself for what you are trying to do. I have used Cinema 4D in the past, and that allows one to pull in Poser models directly and one can use the included BodyPaint to paint in 3D with layers. It is better than Photoshop for that, but leaves something to be desired if you want to paint a displacement map (where you need to use zbrush or mudbox). I've used Maya, and its painting part is worse than Photoshop. Recently, I've used Autodesk's Softimage and imported the collada models. They require a considerable amount of reweighting to work, but Softimage is a great program for modeling and animating (probably the best). In Softimage, I use the BodyPaint plugin to do what you are wanting to do. It works, and Photoshop is not quite ready for prime time for 3D painting, in my opinion. The Poser collada export is problematic in most programs. I could never get textures to import into Houdini correctly. The collada export works best with Softimage, but one still needs to fix transparency and bump issues. My experience with older versions of DAZ studio were that they were very buggy and not to be recommended.
I wish I could give you better advice. The rescaling issue is difficult to fix without a real 3D program. I can rescale models easily in most programs (Maya, Softimage, Houdini, Cinema 4D, etc.) but not in Poser. I export collada with 1000% scaling for Softimage, and as you say, you can't do that with obj models. (you can scale obj models in most 3D programs and then export them to Photoshop, Zbrush, Mudbox, etc., but you need a "real" 3D program. Poser was made for people who like to pose human models, but it is very weak in rendering, creating models, simplifying complex polygons, simulations, and about every standard thing one does in a real program.
I haven't used blender, but it is a free 3D program and pretty powerful if you can get around its archaic interface. You might try exporting an obj file from poser and rescaling it in blender and then pulling it up in Photoshop. It is worth a shot.
All the best,
Philo

Tilelist RowHeight and Height not working correctly

Environment: Flash CS4, AS3, Windows XP (client), Windows Server 2003/IIS6 (server)
NOTE: using the tilelist because the clickable item is pushed to an image editor class.
I'm using the standard tilelist setup from the library and creating the tilelist from Actionscript. By default, the column width is 50, though I have set the height to 110 and the width to 640. When I set rowHeight to 85 to compensate for the scrollbar, my entire tilelist becomes 85 high (though tracing the height property says that it is still 110). This causes the text labels to be hidden (unless I use a textpadding of 15, which then obscures the tiles themselves.
I have a similar problem with the width, columnWidth, and columnCount properties, as I set width to 640, columnWidth to 100 and columnCount to 6. What I get is a control that is 300 wide (as presented by the trace(loadBackground_mc.width) command).
Is the only alternative to solve this problem a custom cell renderer?
Any suggestions would be appreciated.

I found what appears to be the answer. Unlike many other controls, Tilelist settings must occur in a very particular order. You must set RowHeight and ColumnWidth, RowCount, and ColumnCount before setting the size of the control. I converted all my tilelists to load, then used a "setSize" method instead of individually setting the height and width properties of the control. These were done after defining the row/column counts and the rowheight/columnwidth.
Now, the Tilelist appears to work just as I need it. I wish there was better documentation on this requirement. I would expect that the size of the outer container would be set first and the inner containers (like the cells) would follow, but that is not the case here.

Email counter and connection not working correctly after updates

How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine. Does anyone have a fix for this?

I did find the problem with the counter. It had to do with my Gmail account not my other email account. I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though. I have made sure that the passwords is correct that is entered.

CS4 not working correctly on 10.8

I can't open canon CR2 files in CS4 since my upgrade to 10.8
Bridge or Acrobat wont open at all.
Here is a link from Adobe about compatibilty.
Does not look good.
http://www.adobe.com/products/creativesuite/faq.html#lion-os

Hey Jack,
I found this article that provides the settings information for configuring iCloud Mail in any email client that supports IMAP and SSL:
iCloud: Mail server information
http://support.apple.com/kb/ht4864
I hope that helps. We also have an article that is a more general look at how to configure your email accounts to send and receive email in OS X:
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Cheers,
David

HFR Range from and to - Not working correctly for hierarchies?

Hi All,
Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
Does anyone know of a way to resolve this within HFR?
I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
Any ideas?
Thanks,
Lance

Hi Lance,
IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
Cheers, Iain

Dreamweaver and Fireworks not working correctly

I am taking a DW8 class. I have MANY photos I want to use
fireworks for. Installed free 30 trial of DW8 and Fireworks from my
books CD. Did what DW8 said in creating web photo. Used Fireworks
BUT when I clicked on the photo to enlarge I got the black box
around it saying I could enlarge it NOT view it like a picture
show. What I want is to have all photos per event show up and then
let people click on the photo to see either that ONE OR ALL but
full screen. What do I need to do? Should I try downloading the 30
trial from this site for both programs instead of the CD from the
DW8 instruction book?

Hi
The software crashes or freezes. Fireworks will only let me save an item twice, after that, I get an error message that tells me I do not have permission to save that item because it is locked, so then have to save into a different folder or directory, crazy.
When trying to uninstall in control panel, will not open the uninstall, think some kind of permission problem.
I may just do a system restore back to how the computer was purchased, then install all programs again............. See if that works first. None of the other programs are doing this; however, just Adobe, so not sure what happened, just started working like this out of the blue.............?
I am going into a long meeting this morning, so can only work on it in the afternoon.
Thanks for replying...........
Tracey
Sent from Samsung tablet

RAM previewing and rendering not working correctly

Hi,
Today I was just about finished editing a video on CS6 and then when I'm about to add the last effect and render it it stuffs up on me:(. What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects. My specs are:
i7 4770k non overclocked
GTX 780
G.Skill Ripjaws Z 2133mhz 32GB
Samsung 840 pro
Seagate Barracuda
MSI Z87-G45
H100i cooler
Any reply is appreciated
Thanks in advance
Sam

How much experience do you have with AE? Ram preview can be lengthened by adjusting the resolution of the composition window, different parts of the project can be previewed using the work area, and preview length and render time are both a function of composition frame size. Complex, memory intensive effects like particle systems will reduce the render time and the length of a ram preview. Without knowing the details of your composition it's hard to say if you are running into a bug, running out of resources, or experiencing normal behavior.

Update --PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11
1. page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2. options select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again. Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

Canon Lide 30 and CS4 -- Not Working Correctly

Similar Messages

Maybe you are looking for