Canon Log and Transfer problem

Hello all,
I'm trying to upload some HD files from my Canon HF20 on the latest edition of FCP to my iMac 10.58 and running into a problem.
FCP recognizes the video captured on the internal memory. However, it does not recognize the video captured on the SD card in the camera.
Any ideas?

Well, I'm connected to my iMac using a USB. (iMac is running version 10.58 of Leopard). I'm using the latest version of FCP 7.0.2
I can log and transfer files "taped" to the internal memory of my HF20. Files show up fine and import fine.
However, the files that are on the SD card in the camera don't show up in the Log and transfer. ( I put the SD card on a card reader and still no luck.)
I put the card back into the camera and hit the "Add volume" on the top left of the log and transfer and I can see my Canon drive and the other drive which is called "No Name" (I'm assuming simply because I haven't named it anything) I'm also assuming the No Name Drive is the SD card. However, I may be wrong. All the files are grayed out on this drive.
Not sure what else I need to add to give you more info. Let me know if what other info needed and I'll post it.
Thanks again!

Similar Messages

Log and Transfer problem with Canon DSLR

I have not been able to make Log and Transfer work with my canon 5D mrk II files. I can import the files or even drag and drop them into FCE but never have been able to get them to come in using log and transfer function. I have tried every kind of file conversion using quicktime Pro and MPEG StreamClip. Does anyone have a way of getting their files into FCE using this function?
All I ever get is this error:
"DCIM" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
My file structure from the chip is: /DCIM/100EOS5D/MVI_**.mov (and also) MVI_**.thm

have you loaded the canon plug in for final cut? this may be the simplest way for you to get those files into FCP.
http://www.usa.canon.com/dlc/controller?act=GetArticleAct&articleID=3249

Canon 550D/T2i log and transfer problems

Hi there...
I am trying to use log and transfer to get footage from my Canon 550D into Final Cut Pro (6.06)
I have installed the Canon E1 plugin and modified it in accordance with instructions elsewhere but alas everytime I try to transfer the footage I am warned it the directory structure is invalid.
Does anybody know a way around this other than using Compressor or MPEG Streamclip?
Any help you can give will be greatly appreciated

try running a "System Update"
make sure you have your copy of fpc is up to date.
that did it for me. I am no longer getting that "Invalid File Structure" warning
and can just move the files to my external drive and log and transfer sees them.

Log and Transfer problem with MXF files

Hi, folks. I've spent an hour searching the threads, but I haven't found an answer to my problem (or anyone who's had the same problem). Please help if you can!
We're using the Canon XF300 and we tested some footage a couple weeks ago. We ingested it into Final Cut Pro (7.0.3) using Log and Transfer (after installing the Canon plugin) and it all came through perfectly. Worked without a problem.
Now, we have a week's worth of field footage, captured exactly the same way, transferred to the same hard drive, exactly the same as the test footage...
See what I'm getting at? EVERYTHING has been done the same. Identical.
And yet the new footage is not being recognized in the Log and Transfer window.
Instead, this is what's happening:
What gives? Everything we're doing is identical to the testing we did a couple weeks ago. Like I said, I've searched the forums, read a couple dozen threads, followed the Creative Cow link mentioned in several of them. I must be missing something. Please fill in the gap for me. Thank you!
Like I said before, we've downloaded the Canon plugin, imported test footage at ProRes 422, watched it, edited it, enjoyed it. But now our new footage is unrecognizable by FCP. And the directory structure is identical to that of the test footage.
Sigh...

UPDATE --
The field producers transferred the footage incorrectly. They left off the master directory and went in 1 directory too far.
Yes, David, the frame rate was all the same (30p).
Russ... I imagine you were going to say something along the lines of "MAKE SURE YOU INCLUDE THE ENTIRE DIRECTORY." Leave nothing behind.
Now... the question is... can I create a new CONTENTS folder and simply drag the CLIPS folder into it?

Log and transfer problem with prores files

Working on RED project. Started several months ago. Shooting and logging as we go. Project setup on FCP, RED media converted to prores422 proxy with RED software(rocketcineX) and saved on Internal 2 TB RAID. NO problems for past 4 months. Moving prores422 proxy files into FCP via Log and Transfer. (I thought this was necessary, is it?) Anyway its working just fine. Loaded a thousand or so clips to date. Last transfer was August when brought in some P2 media. Now when I go and try to bring in the prores422 proxy clips as before suddenly I get error message of "unsupported media or invalid directory structure. This even applies to all the older files that I had already transferred by log and transfer. They worked before but now they don't. Any suggestions as to why the change? The project will be conformed back to original RED r3D files after edit. Any help greatly appreciated.
Thanks,
Jeff

First, get Preference Manager from Digital Rebellion (free) and trash FCP preference files. Run Disk Utility to repair all drives (Repair Permissions on OS drive). This should be done once a week, anyway. Disk Warrior would be your last resort (and should be run once a month on your drives, anyway). If Disk Warrior won't fix the problem, you have a dead hard drive. Replace it, restore from the backup you've been making of your data on a regular basis. I mean, you do have a backup that you do almost daily for such a large and important project, right?

Log and Transfer problems

i have the new HCM150P Panasonic AVCHD camera. I have a duo core, 4 gig ram, external hd on usb 2.0 (new G Tech TB). When I shoot 1080p24 i have no problem with log and transfer, however, when I shoot 1080p30 my log and transfer has serious issues.
It ingests the video but with dropped frames, interspersed solid green frames and heavy stuttering. I tried the Perian pref fix but it didn't work. I got some good footage I'd sure like to use in the next project, please help with ideas...
thank you very much,
C

I am having the same problem....are you running an intel mac or pre-intel? I have a second G5 here that is intel based and Log and Transfer work flawlessly. Mine will work once I will see the footage and then after closing it the footage will not re-load.

Log and Transfer Problems. Vixia HF10

If you have used this camera before. Yes the format is weird. Now I recently purchased Final Cut. And when I try to use Log and Transfer...It won't transfer. Like My Easy Setup is set to HD Apple Intermediate 1080i60.
But when I drag the video. It gives me a red exclamation. It's connected by a usb. But it does not have a firewire cable.
How do I get my Final Cut to transfer. It doesn't even start to transfer. It just shows the processing icon. and Then it goes to the red exclamation

Hi -
Verify that you are using FCE 4.0.1.
Connect the camera via the USB cable.
Open the Log and Transfer window.
Click on the little gear shaped icon towards the upper middle of the L&T window
!http://www.spotsbeforeyoureyes.com/L%26TPrefs.jpg!
Select Preferences from the drop down menu.
When the preference window opens, set the AVCHD Plug-In audio format to Plain Stereo.
!http://www.spotsbeforeyoureyes.com/L%26TPrefsToPlainStereo.jpg!
Now try connecting the camera and see if you can import your files via Log and Transfer.
If there are clips on the camera memory that are recorded with different settings, this can cause problems. The clips need to be all HD clips.
Hope this helps.

P2 Log and Transfer Problem

I'm trying to import footage shot with these specs: (with FCP 7)
Panasonic P2
720p (960x720)
25 FPS
DVCPRO 720/25p codec
The clips open ok with log and transfer, but once they are transfered the footage has the following errors:
- Playback rate is wrong. Everything plays back at half speed.
- Audio drops out at exactly 2 seconds and 9 frames on every clip.
I tested a clip shot on the same camera in a different format (720/25PN camera native codec) and it transfered fine. No problems at all.
The error only happens with footage shot in 720/25P (DVCPRO).
Does anyone know what is going on with this?
Thanks

In the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
Shane

Log and transfer problem with cannon hf100 (AVCHD format)

Ok.. the preview look good in the log and transfer menu, but when I transfer them and click on them in the browser they play super blured, pixeled, funky.. What am I not doing?? Thanks for any help!!

Command zero will show your sequence settings.
This is kind of important.
And what did you set as destination codec in the Log and Transfer window ?
Have you read the release notes on transferring AVCHD and also any of the knowledge base articles?
http://docs.info.apple.com/article.html?artnum=305997

AVCHD and Log and transfer problems

Ok a while back we purchased a Sony NX5 and until now I haven't had to shoot any major projects with it. But every so often I have been shooting bits and pieces for our stock library. However we also have a secondary JVC GY-HM100 camera that can use the same SD cards as the NX5. So sometimes I'd shot onto a SD card in the NX5 and maybe swap it over to the JVC on another occassion.
Well I started to run into some issues that I initially thought was a result of using the same card in both cameras. The issues were that when I brought the NX5/AVCHD rushes in FCP through Log and Transfer the clip numbers wouldn't make sense, either I'd end up with duplicates or they would suddenly jump by 200-300 increments.
So to try and get to the bottom of this I shot an interview last night, but before starting I fomatted the 32Gb SD card in the NX5. The only thing that happened thereafter was at one point in the proceedings I lost power to the camera (loose cable), but it was not while recording.
So this morning I pull the rushes into FCP via Log and Transfer (L&T). The way I personally do this is to copy the whole AVCHD folder on the SD card onto my Mac hard drive and thereafter point L&T to that loctaion. Incidentally when I did copy the AVCHD folder across, inside there were 38 files in the STREAM folder starting at 00000.MTS going up to 00037.MTS.
So next I fire up FCP and point the L&T windon at said AVCHD folder on my hard drive. At this point inside the L&T window it is showing 76 clips (not 38), ie for the first half of the list it shows clips 1 - 38 followed by (further down the list) another 1 - 38 again. Both sets of clips seem identical according to what I can see on the little thumbnails.
So none the less I let L&T convert them to ProRes and guess what clip numbers it produces in my FCP Browser window? Clips 3 - 38 followed by Clips 290 - 329. Ironically clips 328 and 329 are the same as clips 290 and 291... which also happen to be the same missing clips 1 and 2 from the 3 - 38 range.
This is just driving me nuts, I can't possibly work on major projects with this going on!
I have to shoot 2 more interviews tonight so can someone give me an idea of what is happening and how I can correct it?

Thanks... and rats! Do you know whether something like Clipwrap will resolve my issues, or some other flavour thereof?
Thanks again, at least I know that it's not me doing something ultra dumb!

Log and Transfer Problem - Red Exclamation Stop Sign

I cannot log and transfer any of my files from a Panasonic HD camera P2 card. I checked the other posts about this and tried most of the solutions. The one thing I noticed is that my external hard drive (which is usb) is formatted for Windows NT but it has worked fine for several months until last week. Any suggestions will be greatly appreciated!

Shane,
I found one locally but wanted to see what you think. It is a
Western Digital My Book Studio LX 2 TB FireWire 800/USB 2.0 Desktop External Hard Drive (Aluminum)
Here's a link: http://www.amazon.com/Western-Digital-FireWire-External-Aluminum/dp/B003IT6XDI/r ef=sr_1_3?ie=UTF8&qid=1307482250&sr=8-3
Will this work? It does spin at 7200rpms.

AVCHD Log and transfer problem

Hello guys,
I shot AVCHD footage.
I take SDHC card right from my camcorder and insert it into card reader
Plug the reader into USB
My Mac recognizes the CAM_SD folder on my desktop
I open new project in Final Cut 7 and go to LOG AND TRANSFER
No clips are seen, so I go to PREFERENCES and select:
Source - AVCHD
transcode to - Apple ProRes422
NOTHING HAPPENS, no clips that I could add to queue
Any advice what is wrong?
Thank you.

Are you following this workflow?
http://www.youtube.com/watch?v=AhDnyWFAM10
You need to choose the folder...point FCP to where the footage is.

P2 Preview Log and Transfer problem

I am working on my first HD project -- Panasonic HDVCPRO50 720 24PN -- and "Long and Transfer" recognizes the files we have downloaded, but I get the message that preview is not supported for the format. Anyone know why?

HDVCPRO50
Oh Gawd! Not another HD format

Log and transfer problem

transfering/transcoding mxf to prores. one video dropped into the que automatically turns to n alert icon- ! any way i can get this vid to transfer? thanks!!
A

I had a problem with a avchd clip that gave me a stream error. I just brought it into premier 5.5 and converted it there to prores.

FS100/P2 Log and Transfer Problem

Has anyone had issues transferring(converting) files from the FS100 (P2 Format) into FCP?
I've had no problems in the past, but now, when I open up the FS100 (or from a hard drive I copied everything to), I select the location, add the clip to my queue and I immediately get the message "1 clip queued - idle"
Has anyone seen or heard of this? It is a spanned clip of 43min.
All of the clips that aren't spanned imported no problem.
I can view the whole thing in the clip viewer with zero problems. I just can't get it into Final Cut.
Does anyone have any suggestions besides paying $200 for P2 Log Pro. It feels really horrible to spend more money on something that should work right now. (I ran their demo and was able to grab the spanned clips separately, but the demo only lets you grab 3 clips)
I've also tried changing the prefs to remove advanced pulldown as someone suggested on a forum, but it did nothing.
guhh..
-Matt

I had the exact same problem, it solved itself when I connected the camera to the mac with firewire instead of USB2.

Canon Log and Transfer problem

Similar Messages

Maybe you are looking for