Canon MF4122 using OSX 10.9.2 error message 9781

having problems printing from Canon MF4122 using OSX 10.9.2 error message 9781. downloaded new driver able to print once then same problem came back. Why such problems with using Canon printers

Canon MF4100 Series:
  Status:    Stopped
  Print Server:    Local
  Driver Version:    2.0
  Default:    Yes
  Shared:    No
  URI:    cntdbmu://USB/Canon_MF4100_Series/usb://Canon/MF4100%20Series?serial=SDF8200856 21O
  PPD:    Canon MF4100 Series UFRII LT (UK)
  PPD File Version:    2.0
  PostScript Version:    (3010.000) 550
(3010.000) 651
  CUPS Version:    1.7.2 (cups-372.4)
  Scanning support:    No
  Printer Commands:    none
  CUPS filters:
cupstomcdufr2:
  Path:    /Library/Printers/Canon/UFR2/Cores/cupstomcdufr2/Contents/MacOS/cupstomcdufr2
  Permissions:    rwxr-xr-x
  Version:    2.30
  Fax support:    No
  Printer utility:    /Library/Printers/Canon/UFR2/Utilities/UFR II Printmonitor.app
  Printer utility version:    2.30
  PDEs:
FinishingPDE.plugin:
  Sandbox compliant:    Yes

Similar Messages

  • On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Can you advise steps I might take now?  On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Hi Ringdoc,
    Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
    Let us know how it goes!
    Best,
    Sara

  • Use of #APP_IMAGES# in Validation Error Message

    One of the servers I use upgraded to 4.0. It happens that I use images in some of my error messages on validations. I used the #APP_IMAGES# syntax previously, but it doesn't seem to work in 4.0. I can switch to &APP_IMAGES. so it's not a big deal, but I wanted to mention it. Can someone confirm there's been a change? Thanks.
    Bill

    Well after seeing your post I tried chaning the Edit image in IR . Heres what I found
    1. #APP_IMAGES# does not work
    2. Even &APP_IMAGES. doesnot work
    3. #IMAGE_PREFIX# is the only one that works.
    As we have either #IMAGE_PREFIX# or custom Substitution strings in our apps I had not noticed this before.
    You will find the text below on this page http://www.oracle.com/technology/products/database/application_express/html/4.0_known_issues.html
    9893260 - APP_IMAGES & WORKSPACE_IMAGES USED IN TREE REGION MUST BE PRECEDED WITH HOST URL
    To customize a new JS Tree with images associated with your application or workspace, the image needs to be preceded with the host url.
    Workaround: Prepend the image reference with the host URL, either by hardcoding the URL in the SQL query e.g.'http://apex.oracle.com/pls/apex/#APP_IMAGES#del.gif' or by retrieving the host url via a Before Header computation of type 'PL/SQL Function Body' on the tree page, setting a hidden item (e.g. P6_URL), to retrieve the URL, and then referencing that hidden item in the SQL query (e.g. v('P6_URL')||'#APP_IMAGES#del.gif'). Regards,
    Edited by: Prabodh on Aug 11, 2010 10:13 PM

  • Using 4.0.2, strange error message when trying to created a webi rep

    Hi all
    I'm getting the error message Protocol message end-group tag did not match expected tag. (WIS 00000) while trying to create a webi report using a unx (Designer Information Design tool)
    full error test below
    This unx is using a 7.1 BW cube, and from the unx toll all looks to be ok
    com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
         at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
         at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
         at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
         at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
         at javax.swing.SwingWorker$1.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at javax.swing.SwingWorker.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.businessobjects.sdk.core.server.ServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
         ... 18 more

    You can still create universe, just not UNX universe.
    If you have upgraded Bi4.0 to Sp01 or SP02 - in IDT it will not let you do that.
    As for docs :
    /people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
    http://smartdirectory.sap.corp:3080/Assets/asset.epx?id=519f2955-0b47-4a0f-81d1-84e8e5303e5e
    http://www.asugnews.com/2011/02/22/sap-businessobjects-bw-integration-to-get-easier-in-bi-4-0/
    https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/139619-38-87308/SDN%20-%20Best%
    /people/ingo.hilgefort/blog/2011/02/10/sap-integration-update-part-5--web-intelligence-40-connecting-to-bex-queries

  • Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

    I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

    The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
    Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

  • Attempting to use "backup and Restore" giver error message

    In November 2014 I backed up my PC ( see below ) onto  a 2TB ecternal drive ( Lacie).  This ok and can restore.  Spare space 1.2TB
    Now when I attempt to Backup again, using Windows Backup and restore, with same settings  I get an error message :
    "The requested operation cannot be performed on a file with a user-mapped section open"  This appears after some time of activity. There is no mention of WHICH file causes the problem.  I have repeated with different settings ie with
    part backups only, or just one drive only.
    The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
    I would very much appreciate some advice.

    Hi and thank you Mandy.
    After many failed attempts - even backing up a few files to test - I was getting nowwhere.  Eventually I succeeded after disabling start menus and uninstalling some programs.  I also disabled my Kaspersky anti-virus completely and disconnected
    the internet!!  This time the backup and system image appeared to be OK .
    You have helped, Mandy, by identifying the anti-virus as a possible culprit!!  Thank you.  Next time I backup I will just
    temporally disable it and see what happens.
    Kind regards
    Malcolm

  • I cannot use a "click here " link within a email like I used to. I get error message. How can i fix this

    When I attempt to use a clickable link..such as in a email that says "click here" I get a error message. I know there must be some setting I am not seeing.

    Its says windows cannot find..and then the address thread..then check to see if you typed the name correctly and try again.
    If there is a HTTP address I can copy and paste in but if not I cannot use a click Here link.

  • Trying to set up Directv GenieGO using Airport Extreme.  Getting error message: DHCP range entered conflicts with the WAN IP Address of your base station.  How do I resolve the conflict.

    Trying to configure an Airport Extreme manually.  After I enter the IP Address of the GenieGo along with the rest of information required I am getting the following error message when I click update:
    DHCP range entered conflicts with the WAN IP address of your base station. 
    How do I resolve the conflict? 

    You cannot use the same range on LAN and WAN if you are routing.. it must be different.. and you should not be routing at all.
    The AE should be in bridge mode. NO DHCP settings at all.

  • OSX Mavericks endless iCloud error message

    Since the download I have been getting an error message every 2 seconds that my computer can not connect with iCloud. I am having no issue with iCloud just the error message. How do I make it stop?
    Thanks

    OK, here's my story:
    I re-installed OS X using the re-install partition. When that was done, Mail.app still had a problem. I noticed that my email address was entered as "me.com" instead of "mac.com", but changing it did not seem to work. Then I saw that I had a bunch of old alias email addresses that I don't use anymore, so I deleted all of those, and after that I had a pull-down menu of email addresses to choose from. I chose the "mac.com" address. At first it didn't seem that anything was happening, but when I went back to Mail.app I saw that my mailboxes were being re-filled, slowly. This process continues as I write, but the problem seems to be solved. How, I'm not sure.
    It is definitely maddening, however, when Mail says to delete the iCloud account from System Prefs and System Prefs says to delete it from Mail and that pop-up window keeps popping up repeatedly. I did not find this to be a user-friendly experience.

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • My canon MP600 will not print due to error message U052

    Error message - The type of print head is incorrect - install the correct print head. I have not changed the print head - all lights are solid red with the exception of M and C. When you remove them and reinstall the lights are solid red. I have removed the print head and cleaned it - still no joy. Assistance please - why has this just stopped working.

    i have this same problem, have you found a solution????

  • Adobe photo shop will not download. just bought it. using osx 10.9. see error msg below

    Process:         PDApp [280]
    Path:            /Applications/Utilities/Adobe Application Manager/*/Adobe Application Manager.app/Contents/MacOS/PDApp
    Identifier:      com.adobe.PDApp
    Version:         6.2.112.0 (6.2.112.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [139]
    Responsible:     PDApp [280]
    User ID:         501
    Date/Time:       2014-04-10 08:28:50.442 -0400
    OS Version:      Mac OS X 10.9 (13A2093)
    Report Version:  11
    Anonymous UUID:  B9FDBDAD-415A-7C26-06B9-99C8D431DD70
    Crashed Thread:  6  Dispatch queue: NSOperationQueue 0x281c00
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000030000020
    VM Regions Near 0x30000020:
        MALLOC_TINY            000000000d900000-000000000da00000 [ 1024K] rw-/rwx SM=PRV 
    -->
        __TEXT                 000000008fe3e000-000000008fe71000 [  204K] r-x/rwx SM=COW  /usr/lib/dyld
    Application Specific Information:
    objc_msgSend() selector name: release

    Katzlj what steps have you tried so far to resolve your crash?

  • When trying to create connection using Contribute 6.5, get error message "Unknown error.  Please see the log for detail."  The log says "Network connection timed out."  What do I do now?

    Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems.  All of a sudden I cannot create a connection to our website.  Tried to chat with Adobe a twice now and got no help.  Yesterday they started a chat with me, then ended the session without any communication!  My problem has been going on for several weeks now.  I uninstalled Contribute, downloaded and installed again, but it did not help.  Hostway had me connect with Zilla and everything worked fine.  So, they say the problem is with Adobe.    The last attempt ended with "Unknown error. Please see the log for detail."  The log says "Network operation timed out."  Does anyone have any suggestions?

    Hi There,
    Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
    Regards,
    Mayank

  • CC4 not working with OSX 10.9 - Fatal Error Message

    I just loaded Creative Suite 4 from my old Mac to my new Macbook Air (OS X 10.9). Everytime I try to open a document the program quits and it says "Fatal Error - Missing Component." followed by the following:
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    How do I fix this?

    I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
    Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
    Read Before Posting: How To Get A Useful Answer To Your Question

  • I have a D7160 that have not been using for awhile. Get Error message: Oxc18a0206

    I have replaced the ink cartridges and tried all of the online troubleshooting ideas that I have found such as power off/power on. How do I get to the PC board to check the cmos battery? Any other ideas?

    TLDR
    But I did skim over some of it, and I see a big mistake repeated several times:
    "&" is the bitwise AND operator.
    "&&" is the logical AND operator.
    You've confused them, but you're using them in such a context that it's not a syntax error, so you're probably getting unexpected results. When used with booleans, it will probably work okay, although the operators will not be evaluated conditionally. But when used near ints, you've got a problem:
    Int examples:
    if (targetList.size() != 0 & inRangeList.size() != 0){
    if (actor.getX() == actorList.get(inRangeList.get(currentClosest)).getX() & actor.getY() == actorList.get(inRangeList.get(currentClosest)).getY() ){
    for (int i = 0;
                    i < inRangeList.size() &inRangeList.size() != 0;
                i++){
    if (actor.getX() == d.getWidth() & actor.getY() == d.getHeight()){
    Boolean examples:
    if (brainState.getFoodLocationFound() & actorFound){
    else if (brainState.getNestLocationFound() & actorFound){           
    else if(brainState.getFoodLocationFound() & !actorFound){Also, avoid declaring variables named "l".
    Some of those while() loops would be better rewritten as for() loops so that the loop variable will be limited in scope to the loop.

Maybe you are looking for