Canon MF4150 won't print when connecting through AP Extreme

I have a MacBook 2.16 about 2 weeks old. I've bought an Airport Extreme and am trying to connect my Canon MF4150 into it but whenever I print it just won't happen. The print queue just shows the jobs as "stopped" and I cannot restart them.
The printer log shows the following error
I [12/Nov/2007:13:49:41 +1000] [Job 4] Adding start banner page "none".
I [12/Nov/2007:13:49:41 +1000] [Job 4] Adding job file of type application/pdf.
I [12/Nov/2007:13:49:41 +1000] [Job 4] Queued on "CanonMF4100Series" by "john".
I [12/Nov/2007:13:49:41 +1000] [Job 4] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 1358)
E [12/Nov/2007:13:49:41 +1000] PID 1358 (/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr) stopped with status 144!
I [12/Nov/2007:13:49:41 +1000] Hint: Try setting the LogLevel to "debug" to find out more.
E [12/Nov/2007:13:49:41 +1000] [Job 4] Job stopped due to filter errors.
The one other user on the network is using Vista and is printing fine to the printer. I'm using print driver 1.5 from the Canon website.
Any thoughts or help you can give would be appreciated.

You won't be able to get this combination working. There is something about the Canon UFR2 driver that doesn't 'see' the AEBS USB connected printer. Have a read of my posting on the Airport forum.
http://discussions.apple.com/thread.jspa?threadID=1057102&tstart=30

Similar Messages

Canon MF4150 - won't print, despite fresh drivers

So I'm trying to help set up a relative's new iMac with Snow Leopard 10.6.8.
I've downloaded V2.24 of the relevant Canon driver for his ImageClass MF4150 printer, and when I set everything up and go to print, I get this:
"Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again. Then, if the print dialog box has a [Printer Info] button acquire the printer information.: 10322"
Very frustrating. Anyone have any thoughts?
Thanks in advance ...
I did search and it seems like many have had the same problem, but none of the fixes proposed have seemed to work for us.

As sig has suggested, the connection from the Mac to the Canon MF4150 is important. The Canon UFR2 driver only supports a direct USB connection from the Mac to the printer. You cannot have the printer connected to a print server, router or a Windows computer.
If you do have the MF4150 connected directly to the Mac via USB then the USB cable could be the cause of the error. As the error message suggests, you can open a document and select to print. From the print dialog, change the menu to Special Features and press the Printer Info button. This will open the Printer Information window and if the connection is good then you should see an image of the printer. If the connection has a problem then an error message will appear stating that it could not acquire information from the printer.

Canon i550 won't print with MacBook and Airport Extreme

Since we got a new MacBook, we upgraded our Airport Express (b/g) to Airport Extreme (n). Needed tech support from Apple to get the computers on the internet (something about the cable company switching IP addresses), which worked great, but since then the only problem is that I can't print wirelessly from the new MacBook to our Canon i550 printer, which is hooked up by USB to the Airport Extreme. (Ironically, when the internet wasn't working through the Airport Extreme, the one thing that DID work was printing wirelessly.) The other computer, a 2007 MacBook Pro, prints wirelessly with no problems, but I see that under "location" in the print utility it still has "Express" listed (on the MacBook I get the new network name, "Airport Extreme"). I've tried reselecting the printer in Bonjour, reselecting it in AirPort Utility under Printers, turning printer on and off, but no matter what, in the printer status box it just says "Connecting", and never actually prints. I just upgraded to 10.5.6 which still didn't help. Anyone have any thoughts? Thanks.

Welcome to the discussions, Brian!
Please work your way through the Apple Troubleshooting Guide to see if your HP might be compatible with the AirPort Express.
Keep in mind that if your device is compatible, only printing is supported at the USB port on the AirPort Express. So, if you need to scan, copy, fax or check ink levels, etc., you will need to hook the device directly to your computer.

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

The cyan color won't print when using our HP Pro 6500 Officejet printer

the cyan color won't print when using our HP Pro 6500 Officejet printer. Can I get help with this?

This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Canon ip6600D Won't Print

Brand new Canon ip6600D won't print through iPhoto, specifically print job tries to print but after approx. 10 seconds of trying it defaults to "job stopped." Prints fine through Web browser and all other apps. Are there hidden iPhoto printing prefs somewhere that can be deleted? Previously had a Canon i990 printer and never had a problem with it. Thanks for any suggestions.
iMac G5 Mac OS X (10.4.3)

Aaron:
All I can think of is to remove the Canon print drivers and then reinstall them. You might go to Canon's site to see if there is a newer driver than what you've got. Also run Disk Utility and repair disk permissions. You might try that first.
If neither help I would run OnyX and clean out both the user and system caches. Your first restart afterward will be slower but will get back to normal on subsequent restarts.

HT1363 hi, i use an old but great black photo/video ipod. Suddendly it won't recharge, when connected it emits several clicks and an ipod icon appears together with the apple support email address. I have tried to restore and reset but it won't work. Any

hi i use an old black 60G photo/video ipod. Suddenly it won't recharge, when connected to the pc it emits several cicks in serires and then it shows at intervals a low battery signs and another sign, a sad faced ipod icon with the apple support email address. Any clues and to how I can rescue it? Thank you very much. Alf1962

I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
Message was edited by: shenards
Message was edited by: shenards

My "4" won't turn on, won't charge when connected to charger or computer. I've tried to reboot and it still doesn't turn on, its never been dropped or had water damage. My warranty ran out on feb. 23, help!

My "4" won't turn on. It won't charge when connected to a charger or to the computer. It's never been dropped, or had any water damage. It looks like its brand new! The warranty ran on on Feb 23rd, help!!!

Hello Breejumpp,
Try Reset ( No Data will be lost )
Press and Hold the On/Off switch (On top your iPhone) and the Home Button (Button at the bottom of your iPhone screen). Hold both the keys simultaneously for atleast 10 to 15 seconds and you should see an Apple Logo coming up on your screen, once you see the Apple logo you can then release oth On/Off switch and Home button and wait for your iPhone's Home screen.

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I just looked at the Canon site and it has Mavericks drivers.
http://www.usa.canon.com/cusa/macosx_lion/multifunction_printers/pixma_mx_series /pixma_mx870?selectedName=DriversAndSoftware

HT4623 ipad stuck with a connect to itunes sign but it won't update when connected because it says content is full

ipad stuck with a connect to itunes sign but it won't update when connected because it says content is full

You are in Recovery Mode
http://support.apple.com/kb/ht4097

IPad 1,1 won't respond when connected to any computer, except 1

[IPad 1,1 won't respond when connected to any computer, except 1]
Symptoms:
-iPad shows no sign of recognition of being plugged into computers
-screen does not light up, if sleeping
-ipad will not turn on if turned off
-ipad does NOT say "not charging"
-ipad does NOT have lightning bolt in battery
-does not sync
-computer does not see it
-computer does not see in itunes
-windows device manerger does not see it
-If VM IS turned in mac osx the "connect to mac or windows" dialog box DOESNT appear
-iPad WILL charge IF plugged into wall using ANY cable.
-iPad will connect and act completely normal with PCG-R505DL
stats:
iPad1,1 -(warranty expired over a year ago)
-works with:
-PCG-R505DL(broken?)(old)(638MB RAM)(1GHz processor)(runs windows 7)(designed for windows xp)
-doesnt work with:
-MacbookPro9,2(8GB RAM)(2.9GHz i7 Processor)(turbo boost to 3.7GHz)(osx 10.9, windows 7 Bootcamp)
-IBM Thinkpad(1.6GHz Pentium M Processor)(single core)(1GB Ram)(runs windows 7)(designed for windows xp)
i have:
-imported the HDD from PCG-R505DL to IBM Thinkpad and installed the required drivers(didnt work)so i moved it back
-installed new copies of windows to bootcamp and other two computers(same results)
-updated all computers itunes, checked firewall, no virus software installed
-used 5 USB cables, all from apple, all work with other iDevices
-tried to restore(sucessfull on working computer), no effect on the others
-tried it on my friends new macbookpro (no effect)
-neither my iPod1,1, my iPod3,1, nor my dads iPad2,1 have any issueswith this(or other) problems
(the "1" computer menchioned in the description)(PCG-R505DL)
-is exibiting signs if imnent failure, ex. hdd cable going bad, ethernet not working, wifi card going out, CD Drive Useless, freezing, rebot doesnt work, crashing (none of these issues are present if HDD is plugged into other computer, so not a virus)
i have been having problems with this for about a year now, and ANY help is Welcome

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

TS3623 Apple TV works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite receiver work fine both ways

Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.

Does it help if you set the output to 720p.

Canon iP8500 won't print OSX 10.6.3 apps

My Canon iP8500 won't print OSX 10.6.3 apps, it causes them to crash. It crashes Safari, Mail, Text Edit. Other apps (Excel, Word) print fine. I've updates to the new driver (10.30.3.0) to no avail. Any suggestions?

Try opening Disk Utility, selecting the OS X partition and then pressing Repair Disk Permissions.
You could also try opening Print & Fax, moving your mouse over the Printers list, and while holding down the Control key, click your mouse. This will make the Reset printing system pop-up appear. Select this and restart your Mac. This action will delete your printer queues but not your printer driver. So you will just need to open Print & Fax again and add the iP8500.

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore

Canon MP620 won't print

I have a Canon MP620 printer that for some reason the drivers were missing one day and I was unable to find the discs for the printer. I was able to find them online again and it's able to scan but now it won't print anything.
I have it connected via USB to my MacBook Pro (running on 10.5.8) and when I try to print something, the printer queue appears and says that the job is processing and the same on the printer screen but nothing is being printed.
If anyone has some sort of solution, it would be much appreciated.

Solution Menu is just a front-end to the other Canon applications, such as MP Navigator and Easy Photo Print. Solution Menu does not do any of the printing. So, is it the Easy Photo Print application that you cannot print 4" x 6" photos with?
Canon released later versions of applications to be compatible with 10.6. If you are still using the Leopard versions of these applications from your upgrade then you will have download and install the later versions.
If you have the later versions but are still having problems, have you tried using iPhoto as an alternative to see if this will work printing 4" x 6" photos.
Pahu

Canon MF4150 won't print when connecting through AP Extreme

Similar Messages

Maybe you are looking for