Canon MF4570dn (MF4500 series) scanner problems

Hi -
I have a new Canon MF4570dn multi function printer / fax / scanner. I have installed the "MF Toolbox" software but I can not get the scanner to work. I have no interest in the fax function. When I push any of the "color scan", "B&W scan", or PDF, etc. buttons (on the computer screen) nothing happens. Also, if I try to manually start the scanner using the buttons on the printer, nothing happens. I have read a few things regarding similar problems on this forum, but there was not clear fix for the problem. Any ideas?
THANKS!

Thanks PAHU -
I'll try what you are suggesting. In the mean time, I received this answer to my inquiry which I also had sent directly to Canon. They are telling me that MF Toolbox is not compatible at all with OS10.6.
Dear Doug Shaffer:
Thank you for your inquiry. We value you as a Canon customer and
appreciate the opportunity to assist you with your imageCLASS MF4570dn.
We apologize for any difficulties experienced in trying to scan via the
MF Toolbox under your Mac OS.
Please note that although a compatible Mac driver is available for use
with your unit, a compatible version of the MF Toolbox is not available.
Previous versions of the software are unfortunately not compatible. We
apologize for any inconvenience this may cause. However, you may wish
to consider a compatible third-party scanning application of your
choice.
Please let us know if we can be of any further assistance with your
MF4570dn.
Thank you for choosing Canon.
Sincerely,
Deborah
Technical Support Representative

Similar Messages

Scanning problems with Canon Pixma 5300 series after upgrading to newest Macbook Pro

Are there drivers available for Canon pixma 5300 series for OS X Mavericks 10.9?
Scanning with my brand new Macbook pro using OS X 10.9 just isn't working like it used to with my old white Macbook.
Does anyone have any suggestions?

Do you have an MG53xx? If so, then a scanner driver for this model is available from Apple so that you can scan with Image Capture / Preview. So if you open Printers and Scanners and select the MG53xx, you should have two tabs - Print and Scan.
Canon also has a scanning application called MP Navigator available from their web site. To use this application you will also need to download and install the scanner driver for the MG53xx, which should also be available from the same Canon web site.

Has anyone else had problems installing drivers for the Canon MF4570dn?

I recently purchased a Canon MF4570dn multifunction printer, to be installed on my network at home. It works very nicely with my wife's Windows 7 box.
On the other hand, I cannot install the driver software on either of my Macs (iMac i7 running 10.6.8 or G4 running 10.4.11). The installer fails when it gets to the point of running its internal scripts, and provides a proposed "solution" of "Call the software provider."
Canon technical support is unable to help. I have reset printers in the system preferences, I have downloaded the installer package multiple times from their web site, I have repaired permissions, all to no effect. Their final suggestion is "Call Apple Technical Support and have them perform a 'profile reset'." (I've never heard of such a thing, in 27.5 years of owning Macintoshes. Has anyone else????)
So my question is this: If you have one of these on your system, did you have any issues getting the drivers installed? If so, how did you overcome them?
Thanks,
Rich Alderson

More negative feedback on these Canon MF4570dn devices elsewhere on the support boards. Buyer beware!
https://discussions.apple.com/message/16944619#16944619
https://discussions.apple.com/thread/3524366

New Canon Pixma MG2220 printer - install problems on Windows XP

I bought a new Pixma MG2220 printer and received it 2 days ago. I followed the instructions and installed it from the provided CD on my 10 year old Compaq S4020WM desktop computer upgraded with 1GB RAM and 1TB hard drive running Windows XP SP3.
The CD installation took a very long time to complete (maybe an hour or so) and things did not work right. In particular the My Image Garden software was very slow and sluggish to respond. So I downloaded and installed the latest drivers and software from the Canon website on top of the existing installation, which did not help. The My Image Garden software began crashing completely with an error message about a bad .dll file. After talking to Canon tech support on the telephone, the support tech admitted that this software CD was probably not compatible with my old XP computer. The My Image Garden software uses like 500MB RAM which is too much resources for my machine. So the rep had me uninstall My Image Garden.
At that point I decided to uninstall everything and start over from scratch because something was obviously not right. For example, the Canon MP drivers were using 755 MB RAM, which seemed much too large. Obviously things had not installed properly from the setup CD, in general. The date on the setup CD was 2011, so apparently it was 2 years old, and long out of date!?
So I uninstalled everything except the Canon registration and onscreen user manual. I also kept Windows Adobe RGB 1998 because I didn't see any way to uninstall it. I also uninstalled .NET 4 which the setup CD had said was necessary, as well as Microsoft XPS EP which My Image Garden had also told me was needed. Then I cleaned up my computer as well as possible with help of Revouninstaller and Ccleaner, which was necessary because things were very messy with many uninstalled remnants and incorrect registry entries. I feel lucky to have survived those tasks without having to reinstall my op system. It wasn't easy.
Then I installed the following 2 modules (only) downloaded from the Canon website:
MG2200 series MP Drivers Ver. 1.01 (Windows 8/8...        01/31/13    14.07 MB
File Name: mp68-win-mg2200-1_01-ejs.exe
This file is a driver for Canon IJ multifunction printers. You can install the following items of the software: MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
*My Printer Ver. 3.1.0 (Windows 8/8 x64/7/7 x64/...        01/07/13    5.12 MB
File Name: mypr-win-3_1_0-ea11_2.exe
This file allows you to easily change the settings such as the paper source settings and provides you with information on how to solve problems such as ink smudging.
I believe that's everything required to access all of the print, copy, and scan operations of this MG2220 printer. Based on my current understanding, I would classify everything else as optional. I use free Irfanview for editing and manipulation of images, which seems a satisfactory substitute for the other software.
I did not reinstall .NET 4 or Microsoft XPS EP, because apparently they're only required if you install the My Image Garden and/or Quick Menu modules. I also did not reinstall the Easy-WebPrint EX module which apparently only applies to printing with the Internet Explorer browser, while I primarily use Firefox, Chrome, or Opera browsers. And of course I did not reinstall My Image Garden nor the Quick Menu, which were so problematical originally.
On the bright side, the Canon MP drivers appeared to install correctly this time, using only 35 MB RAM (vs 755 MB previously). Also the Canon IJ Scan utility was reinstalled automatically as a part of that driver installation process. Those items have their own shortcuts. I found it useful to make one additional shortcut via Start > Settings > Printers and Faxes > "Canon MG2220 series printer", to allow easy access to all of the internal printer settings and variables. Like I said, I believe this is all that's required, in addition to some image manipulation software such as Irfanview. I deal mostly with documents and never print photos nor use cameras. Those who have large photo collections and/or cameras may need something like My Image Garden or Easy-PhotoPrint EX.
I previously used Lexmark printers for the prior 10+ years, where everything is controlled by software from the computer. I never had to use the buttons on the printer. That's obviously different with this Canon printer, which will take some getting used to.
I'm disappointed that there's apparently no way to enlarge or reduce the % copy size with this model. Is there? I also don't find any setting for lighter/darker when making copies. Is there? There are apparently no other enhancements or filters available when copying. Are there? Similarly, scanning seems remarkably unversatile with this model and I can't find any way to set a scan for ligher/darker or apply various enhancements/filters. Are there?
The printing seems OK, but I must still decide whether the very limited copy and scan options will be sufficient to my needs. I'm not sure yet. I might take it back for a refund and get something better, if I knew what was better. That's another research project. Suggestions?
Thanks for any feedback.

Thanks for your info but the MG5420 is more than twice the cost at my local Walmart and Staples stores.
I thought I was being smart to buy the MG2220 as a later model(?), but it looks like the prior model MG2120 has more copier and scanner features according to the online specs at the Canon website (see copies below).
For example the MG2120 allows 25%-400% reduction/enlargement when copying, while the MG2220 does not. Can you verify this?
Also does the MG2120 allow for setting copying to lighter/darker? (I don't understand that complicated technical lingo in the specs.)
Thanks.
Pixma MG2120
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds8
Reduction / Enlargement   25% - 400%
Copy Features   4-in-1 / 2-in-1, Auto Exposure/Intensity Copy, Face Brightener/Fading Correction, Fit-to-Page, Gutter Shadow Correction Copy, Image Repeat, Intensity, Multiple Copy: 1-9, 20 Pages, Photo Reprint, Preset Copy Ratios, Zoom
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Document Fix, Auto Scan Mode5, Gutter Shadow Correction, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"
Pixma MG2220
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds3
Copy Features   Borderless Copy, Fit-to-Page, Multiple Copy: 1-9, 20 Pages
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Scan Mode, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Canon MF4570dn Printer error: capdftopdl failed

I have three iMacs all running OSX v10.6.8 and connected to a Canon MF4570dn printer via network static IP - using Bonjour protocol and Canon Driver.
Downloaded the latest drivers from the Canon website for OSX v10.6 and installed the package.
Only one of the iMacs will print/scan successfully.
The other two throw this error:
Error: /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl failed
So I called Canon and they walked me through removing and reinstalling the driver - of course with the same error result - so now they are telling me to call the computer manufacturer(Apple) for support for a corrupt driver (huh?).
Any ideas on how to get rid of this error and get the printer work?
Thanks.

hey, I tried what you said, but no luck, still getting the same error. Did you do anything else
The problem was under advanced networking -
there were entries in the Bypass Proxy Settings for these Hosts & Domains -
I removed the entry *.local, 169.254/16 (not needed) and that's all it took. Hope this helps someone else.

MX922 scanner problem message: set the pc to start scanning

I am trying to scan using my MX922 printer. I am getting a message: "set the pc to start scanning." Can't find what this means.

I ran into this... Suddenly the scan function from the Canon didn't work, I just got "Set the pc to start scanning." WT??? Why work all this time and suddenly not? Under scan>save/forward>select pc, only "local (usb)" appeared. No pc. Yet the wireless connectivity was there (I checked, under WLAN set up). Plus, I could print wirelessly, and could scan wirelessly if I initiated the scan from the computer via Canon utilities. So it suddenly no longer could find the pc to scan from the unit, even though clearly the wireless connection was there. Turned it on and off several times as suggested by another post. Finally I went to Canon Utilities,> IJ Network Scanner Selector EX > Scan from Operation Panel Settings (button was already selected) > MX920 series already had box checked, so just said ok. i.e. I didn't change a thing, but somehow that got it to work again, and I can now go back to scanning via the unit itself, specifically Scan button > Start on the MX922, instead of having to initiate the scan from the computer. Hope this makes sense!

Facing a series of problems in production server

Dear All,
I am facing a series of problems.
We are using ecc5 on windows with oracle 9i.
Two nodes on cluster.
1. I am getting error in log file
TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
2. dev_disp getting error *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
3. Suddenly shutdown of server.
4.E error in nmiconf.log
I am unable to find the Listener problem because at present it listener is up.
Please help to find the root cause because there 3 Listener.ora
1     LISTENER1.log current date.
      2     LISTENER. Log with old date
And which file and what change I have to do.
2.What settings have to change in DNS settings?
3.What is suddenly caused of server shutdown?
Log file of LISTENER2.log
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener2.log
Trace information written to E:\oracle\ora92\network\trace\listener2.trc
Trace level is currently 0
Started with pid=1332
TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
Log file of LISTENER1.log
Started with pid=1180
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener1.log
Trace information written to E:\oracle\ora92\network\trace\listener1.trc
Trace level is currently 0
Started with pid=1304
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
Log file of LISTENER. log
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 11-AUG-2008 17:10:07
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener.log
Trace information written to E:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=7440
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1527)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
11AUG-2008 17:10:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=#####1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11-AUG-2008 17:59:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11AUG-2008 18:14:17 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11-AUG-2008 18:17:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
LISTENER.ORA
LISTENER.ORA Network Configuration File: E:\oracle\ora92\network\admin\listener.ora
Generated by Oracle configuration tools.
STARTUP_WAIT_TIME_FSL@@@@-SAP-ORAV = 0
LISTENER1 =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1528))
ADMIN_RESTRICTIONS_FSL@@@@-SAP-ORAV = on
FSL@@@@-SAP-ORAV =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1))
    (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1.WORLD))
    (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(Host = #####)(Port = 1527))
This file is written by Oracle Services For MSCS
on Tue May 16 21:20:04 2005
TRACE_LEVEL_FSL@@@@-SAP-ORAV = OFF
CONNECT_TIMEOUT_LISTENER = 10
STARTUP_WAIT_TIME_LISTENER = 0
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1527))
SID_LIST_FSL@@@@-SAP-ORAV =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
LISTENER_000.ORA
This file is written by Oracle Services For MSCS
on Tue May 16 21:20:02 2005
LISTENER =
(ADDRESS_LIST=
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=PRD1.WORLD)
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=PRD1)
    (ADDRESS=
      (COMMUNITY=SAP.WORLD)
      (PROTOCOL=TCP)
      (HOST=########)
      (PORT=1527)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER_001.ORA
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = PRD1.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PRD1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = @@@@-@@@@)
          (PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
nmiconf.log
DBSNMP for 32-bit Windows: release 9.2.0.7.0 - Production on 22-SEP-08 11:33:50
Discovering services on @@@@-@@@@ configured on host addresses {@@@@-@@@@.@@@@.COM 192.168.10.5 @@@@-@@@@}
Warning : Skipping OracleOraHome92TNSListenerFsl@@@@-sap-orav : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerLISTENER2 : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerprd1 : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerprd1.world : Could not find corresponding listener definition in
Warning : LISTENER1 defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
Warning : LISTENER defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
Warning : No Listener found for SID PRD1. PRD1 will be skipped
Could not determine location of emtab.
Regards,
Shiva

Dear All,
I am facing a series of problems.
We are using ecc5 on windows with oracle 9i.
Two nodes on cluster.
1. I am getting error in log file
TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
2. dev_disp getting error *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
3. Suddenly shutdown of server.
4.E error in nmiconf.log
I am unable to find the Listener problem because at present it listener is up.
Please help to find the root cause because there 3 Listener.ora
1     LISTENER1.log current date.
      2     LISTENER. Log with old date
And which file and what change I have to do.
2.What settings have to change in DNS settings?
3.What is suddenly caused of server shutdown?
Log file of LISTENER2.log
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener2.log
Trace information written to E:\oracle\ora92\network\trace\listener2.trc
Trace level is currently 0
Started with pid=1332
TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
Log file of LISTENER1.log
Started with pid=1180
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener1.log
Trace information written to E:\oracle\ora92\network\trace\listener1.trc
Trace level is currently 0
Started with pid=1304
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
Log file of LISTENER. log
TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 11-AUG-2008 17:10:07
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is E:\oracle\ora92\network\admin\listener.ora
Log messages written to E:\oracle\ora92\network\log\listener.log
Trace information written to E:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=7440
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1527)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
11AUG-2008 17:10:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=#####1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11-AUG-2008 17:59:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11AUG-2008 18:14:17 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
11-AUG-2008 18:17:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
LISTENER.ORA
LISTENER.ORA Network Configuration File: E:\oracle\ora92\network\admin\listener.ora
Generated by Oracle configuration tools.
STARTUP_WAIT_TIME_FSL@@@@-SAP-ORAV = 0
LISTENER1 =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1528))
ADMIN_RESTRICTIONS_FSL@@@@-SAP-ORAV = on
FSL@@@@-SAP-ORAV =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1))
    (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1.WORLD))
    (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(Host = #####)(Port = 1527))
This file is written by Oracle Services For MSCS
on Tue May 16 21:20:04 2005
TRACE_LEVEL_FSL@@@@-SAP-ORAV = OFF
CONNECT_TIMEOUT_LISTENER = 10
STARTUP_WAIT_TIME_LISTENER = 0
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1527))
SID_LIST_FSL@@@@-SAP-ORAV =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
LISTENER_000.ORA
This file is written by Oracle Services For MSCS
on Tue May 16 21:20:02 2005
LISTENER =
(ADDRESS_LIST=
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=PRD1.WORLD)
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=PRD1)
    (ADDRESS=
      (COMMUNITY=SAP.WORLD)
      (PROTOCOL=TCP)
      (HOST=########)
      (PORT=1527)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER_001.ORA
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = PRD1.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PRD1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = @@@@-@@@@)
          (PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = PRD1)
      (ORACLE_HOME = E:\oracle\ora92)
nmiconf.log
DBSNMP for 32-bit Windows: release 9.2.0.7.0 - Production on 22-SEP-08 11:33:50
Discovering services on @@@@-@@@@ configured on host addresses {@@@@-@@@@.@@@@.COM 192.168.10.5 @@@@-@@@@}
Warning : Skipping OracleOraHome92TNSListenerFsl@@@@-sap-orav : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerLISTENER2 : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerprd1 : Could not find corresponding listener definition in
Warning : Skipping OracleOraHome92TNSListenerprd1.world : Could not find corresponding listener definition in
Warning : LISTENER1 defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
Warning : LISTENER defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
Warning : No Listener found for SID PRD1. PRD1 will be skipped
Could not determine location of emtab.
Regards,
Shiva

Mac Pro (early 2008) - a series of problems

Like many people here, I've been hit with a series of Mac Pro (early '08) issues. I've had the machine for a little over a month and I love it when it's working. But recently, the aforementioned "series of problems" has arisen - ATI graphics card freeze, reboot from sleep, etc.
But the weirdest, and perhaps most troubling issue is one with my main hard drive (Hitachi 1 TB) in Bay 1 (I have another 1 TB drive [Seagate] in Bay 2). The temperature of my Hitachi drive hovers around 101-106 degrees when active, and stays in mid-90s when relatively idle. I was wondering if this is considered a normal temp range for a hard disk? The Segate drive in Bay 2 runs around 88 degrees at its hottest (according to the iStat widget). While it's not used as much as the start-up drive, I am a bit alarmed by the difference in the temperatures of the drives...
Possibly related to this is the fact that my start-up drive (Hitachi) has some disk repair issues pop up when I ran Disk Utility. This might be due to all the hard shut downs I had to do because of the ATI graphic card freezes, but I was dismayed to see it happen so early in the computer's lifecycle.
And finally -- and I know this is a long post; I appreciate those you have stuck around -- I noticed on my Hitachi drive that I seemed to "lose" about 25 gigs of data. Not stuff that I lost because it was deleted, but rather it was as if I had transferred a huge 25-gig file onto the hard disk which took up the space.
For instance, earlier in the day, it said I had 490 gigs available, but several hours later, after transferring nothing to the hard drive, it mysteriously said I had 469 gigs available. Has anyone experienced anything like this before?
Thanks for your time...

When I purchased my Mac Pro in mid-January from the local Apple store, I also bought two Hitachi Deskstar 7K1000 1 TB drives from the Apple Store which they installed. I configured these drives as a Raid 0 array for use with Final Cut Studio 2. This Raid array of two 1 TB Hitachi drives has worked flawlessly. My OS is located on the 320 GB Seagate that came with the stock configuration of the Mac Pro under heavy A/V application use. The Hitachi 1 TB drives are known to run a little hotter than other drives, but I don't have any software that monitors the temperatures on my Hitachi drives so I cannot say if they are running as warm as you have noted. Here is a link to a review of the 7K1000 that showed an operating temperature of 31-39 degrees Centigrade in moderately heavy use:
http://www.anandtech.com/storage/showdoc.aspx?i=2969.
Based on what you have reported here is what I would do: (1) Erase and zero your Hitachi 1 TB system drive. This will take several hours but will map out any bad sectors on the drive. (2) REinstall your OS and applications. I would not restore from TM because you may have backed up the problems that were existing on your system drive.
The Hitachi 1 TB drives are thermally protected. Here is the complete data sheet on the Hitachi 1 TB drive: http://www.hitachigst.com/tech/techlib.nsf/techdocs/67A68C59B27368FC862572570080 FC70/$file/Deskstar7K1000010307final.pdf
It really does not sound to me like your drives are the problem and that they are probably operating within normal limits, but a call to Hitachi tech support would probalby clear that up firmly.
Tom

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Scanner problems LIDE60, only works with XSane, but Xsane is buggy!!

Hello everyone, I'm trying to get my LIDE 60 scanner working properly with Arch.
Xsane work OK with it, but it doesn't seem to work with anything else (I installed gnome-scan and sane-pygtk from AUR).
Both these apps do not see it at all.
I like XSANE, but there is a bug with it: I cannot select the area I want to scan in the preview area.
When I try to drag/enlarge/move the selection box, it dissapears and goes elsewhere on the window...
(I would PREFER fixing Xsane, but in the meantime, would like to try other apps)
Here is my LSUSB output
[charles@amdx2 ~]$ lsusb
Bus 002 Device 002: ID 045e:009d Microsoft Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04a9:10c4 Canon, Inc.
Bus 001 Device 003: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
the output from scanimage -L
[charles@amdx2 ~]$ scanimage -L
device `genesys:libusb:001:003' is a Canon LiDE 60 flatbed scanner
genesys IS enabled in /etc/sane.d/dll.conf
Here is the output from flegita/gnome-scan
as you can see it seems to be ignoring the scanner it finds...
"see line ** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored"
Please, please HELP I'm not totally new... just been on Windows for a couple years,
but i've been installing Linux on and off to try. (so far, Arch seems a keeper. take a while to install
but it's great!)
[charles@amdx2 sane.d]$ flegita
** (flegita:11223): DEBUG: gnome-scan-init.vala:33: Initializing GNOME Scan 0.7.1 for flegita
** Message: gsane-module.c:53: SANE version is 1.0.20
** Message: gsane-module.c:53: SANE version is 1.0.20
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneBackend'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneScanner'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileBackend'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileScanner'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileOptionFilenames'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileFilenamesWidget'.
/usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: Invalid symbolic color 'tooltip_bg_color'
/usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: error: invalid identifier `tooltip_bg_color', expected valid identifier
(flegita:11223): GLib-CRITICAL **: g_utf8_strlen: assertion `p != NULL || max == 0' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
** (flegita:11223): CRITICAL **: gnome_scan_scanner_selector_on_scanner_added: assertion `new_scanner != NULL' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored
** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured
** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured

BTW, this is on a fresh install of Arch done yesterday: Linux groovy9 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
For a plan B, if there's a straightforward way to custom compile my own kernel, I'd like to try a slightly older one to see if I have better luck. This same model of scanner is working fine on a 3.5 kernel, for example.
Last edited by groovy9 (2013-10-09 21:34:22)

Can't print to Canon MP 250 series, installed drivers

Hi from Cairo,
I'm running OSX 10.8.2 and I'm trying to install a Canon MP 250 series printer. I've downloaded and installed the driver twice, gotten the "installation successful" message, but still nothing will print. This is the error message I found in the logs:
E [01/Mar/2013:12:16:36 +0200] Canon_MP250_series: File "/Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacO S/Command2CanonIJ" not available: No such file or directory
Your kind support is deeply appreciated.

Latest drivers:
http://support.apple.com/kb/DL899
Then setup printer in Print & Scan

Universal Scanning Program for canon lide 30 (older scanner

i have a canon canoscan lide 30 scanner. the drivers and toolbox are not supported with leopard. you can get it to work but theres alot of work arounds , turning off permissions on folders etc. so i was wondering does anyone know of either a free program or a inexpensive one, that i could use my canon lide 30 scanner with. i tried the program vuescan, cost 40 but wanted to see all my options cause i'm done with trying to make canon drivers and programs works
thanks

Elements 2 should work in 10.4.6. Install PE, then download an install the latest driver for your scanner. (Elements (any version) is not scanning software on its own--it's just that many scanner manufacturers include a PS/PE plug-in for convenience.)

¿Cual puede ser el problema con unos calendarios importados a icloud que se sincronizan perfectamente con mi iphone pero no con mi mac?.

¿Cual puede ser el problema con unos calendarios importados a icloud que se sincronizan perfectamente con mi iphone pero no con mi mac?. Aclaro que no es un problema de la configuracion ya que si añado nuevas entradas al calendario si se sincronizan. Mas bien parece que las entradas importadas originalmente tuvieran algun problema interno que solo afecta al MAC.

La aplicaciones que compraste con la cuenta vieja solo podran ser actualizadas via la cuenta vieja. No hay manera de "fusionar" las dos cuentas.
Las aplicaciones (y canciones etc) estan atadas a la cuenta de la cual se ejecuto la compra.

Trying to connect new MacBook Air to printer (Canon MF4570dn)attached to my PC

I have a new MacBook Air and I am trying to set it up to print to a Canon MF4570dn hooked up via USB to my PC. I have file and printer sharing turned on. The MacBook can see the workgroup --> computer --> printer name. I have tried using Canon's print drivers and generic PCL to no avail. With the former, I get "filter' failed and with the latter, everything seems to work when I look in the printer status (shows that it is waiting to print and then just disappears (as if it has finished printing) - but no printout.
Network is avilable.

Hi LindaH51,
If you are having an issue connecting to a shared printer from your MacBook Air, you may find the following article helpful:
OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11070
Regards,
- Brenden

Canon MF4570dn (MF4500 series) scanner problems

Similar Messages

Maybe you are looking for