Canon MG2100 won't print in black & white.

Can you please send me step by step instructions for getting my mg2100 to print in black and white?

Hi thinkley,
The community is eager to assist! To ensure the most accurate information is provided, we’ll need to know the version of Windows or Mac in use. We look forward to hearing back from you!
If this is a time-sensitive matter, additional support options are available at Contact Us.

Similar Messages

Won't Print in Black & White

Won't print in B&W
If using, Best, plain paper, prints bolded items in blue, regular print as blank lines.
If using photo paper, prints everything, some in black, most in green.
Out of warranty, USA.
Apparently there is a secret reset sequence, wondering if someone could get that to me please.
Larry

Hi @SportNSound,
Thank you for visiting the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 6510 you are unable to print in black ink.
I would like you to continue troubleshooting here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge so the reset is not going to help in this case.
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp 4360 won't print in black & white

I don't use the color on this printer is there a way to take out the #75 cartridge and only use black. I have a #75 but it is empty and it will not print without the cartridge in and doesn't print properly when in. I tried using black only, but this doesn't work.

The printer should work with only the black cartrdige inserted in ink backup mode as described in pages 19-20 of the user manual here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

C 84 won't print in black

My printer now won't print in black ink-have a Wacom graphire tablet with Painter Essentials 2 and was learning how to use it and now can't get my old trusty Epson c 84 to print in black- ran all the alignment test, cleaned print heads etc. Checked Pen settings etc - can print dark navy etc so black in seems to be feeding in. Any web page or document is invisible when it comes out of the printer. I installed Tiger a few days ago per the apple reps suggestion that my pen tablet would be easier to install etc

Thanks and yes and it did not help. What WORKED though was to ditch the Epson and I bought a new Canon cheapo ip1600 and it does fine. It seems to be the most compatible of all of the Canons as it and one other ( per the 800 Canon store) are the only ones so far as Tiger is so new and some of the printer companies could not produce fast enough or fine tune their drivers etc.
Anyway so far no complaints and thanks for the suggestion!

How can I print in black/white only a document that has colors in the original?

How can I print in black/white only a document that has colors in its original. I don't need the print out to be in color, and I don't want to waste the color ink.

It depends on your printer and the application you are using.
In some applications you can choose color vs. greyscale/black&white when you do File > Print. PowerPoint is one example of an application that allows this choice.
Otherwise, you can usually select greyscale at the time you print the document. Do File > Print. In the resulting dialog box, there should be an item called Copies & Pages (in Word and other applications) or Preview (in Preview). Click it. In the resulting list, you should then see an option called Printer Features. Click it. Then you should see an option called Printout Mode. Usually one of the modes is Greyscale or Black & White. Select it. Then Print.
This can also depend on your printer. Exactly what make/model printer are you using? And what kind of document are you trying to print (Word, PPT, JPEG, etc)?

How do I change print preferences to print in black/white by default instead of color

how do I change print preferences to print in black/white by default instead of color

When you try to print, use COMMAND P, it should bring up a window similar to this you can select the preset there. It shoud remember the preset after.

Printing a black & white photo

Hi all,
I'm not sure whether this is the right category but here goes.
I have scanned an old photo using my HP Photosmart C4580, into Photoshop and changed the now, sepia colours to black & white which is fine.
The problem arises when I then try to print it on the same printer, as it doesn't come out black and white, it is printing with a distinct blue tinge so obviously it is not using the black cartridge but is trying to cobble something using the colour cartridge.
Is there a means of forcing it to print in black & white, i.e. ONLY use the black cartridge.
Before you ask, I am on WIndows XP SP3 (which I don't think should make any difference) and I haven't tried removing the colour cartridge as I have a feeling that it might complain that it is missing a cartridge and then possibly get stuffed up when I put the colour cartridge back in.
Any suggestions would be much appreciated.
Regards

OK, there are a few issues here. First, the cartridges are regionalized and there are four different regions and cartridges and printers are not compatible across the different regions. If you bought the printer in the UK and moved to New Zealand then you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
As for the color vs.. black vs.. photo cartridges, your printer can use several different combinations. The cartridges are as follows:
Black: Contains pigmented black ink. This is excellent for plain paper text but is not compatible with glossy photo papers. The drop size is ~3x larger than the color or photo drops since this cartridge is optimized for text. When photo paper is selected this cartridge will not be used.
Color: Contains cyan, magenta and yellow dye based ink. The dye based ink is compatible with plain paper or photo paper.
Photo: Contains light cyan, light magenta and black dye based inks. Used in conjunction with a Color cartridge the combination can give more detailed B&W prints and less "grainy" light areas such as color sky and face tones.
For your case a working color cartridge would likely print fine B&W photo's, but if you did a side by side comparison with a print made with the color and photo cartridges installed you may see an improvement.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp f2280 printing only black&white via time capsule

HP f2280 printing only black&white via time capsule
anyone have this problem before?

I have just purchased the latest Time Capsule and have exactly the same problem with my HP F2280 when printing from my iMac. Very odd. So started surfing the web and it appears we are not alone and there is no easy fix. Anyway it appears the scanner will not work via the TC either, never crossed my mind when I purchased it that I would have such problems. Two thumbs down for TC

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I just looked at the Canon site and it has Mavericks drivers.
http://www.usa.canon.com/cusa/macosx_lion/multifunction_printers/pixma_mx_series /pixma_mx870?selectedName=DriversAndSoftware

6500 All in One - Won't print in black, no error message

Twice now I've returned a black cartridge to Staples, thinking there was something wrong with it because the printer would print fine for the first 20-40 copies, then just stop. When it happened a third time, I started thinking maybe it's not the ink cartridges. The printer just won't print in black. I can change the font color to blue and all's well. When I try to print something in black, the printer ACTS like it's printing but nothing shows up except any color items. The diagnostics don't show any problem, the printer has no error message, even shows the ink cartridge full (which it is) ... but it just won't print in black.
This question was solved.
View Solution.

Try soaking the printheads as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Just purchased a Photosmart Plus B210a cannot print a black & white photo, coming out green.

Just purchased a Photosmart Plus B210a cannot print a black & white photo, coming out green.
This question was solved.
View Solution.

This would indicate your magenta ink is not printing properly. Try the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My printer won't print in black

My printer won't print in black. Went thru every step possible to fix. Still doesn't work. Printer not that old and i use it infrequently.

Hey @zufritto,
Because the Semi-Full Reset failed to resolve this issue I would have to recommend that you contact our Technical Support queue by phone to explore additional options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
Hey @drodg,
I understand that you are also experiencing issues printing in black. I actually worked with you on the following thread: Photosmart will not print from the black cartridge.
I see that you also worked with my colleague @MissTeriLynn on this thread: New black ink cartridges [HP] will not work.
Because this issue is unresolved I would highly recommend that you take the advice to contact our Technical Support queue by phone to explore additional options. Unfortunately, there are no further support options available over the HP Support Forums.
I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

My 6510 won't print in black.

My 6510 won't print in black. The ink cartridge is not empty and all of the other colors work.

Hi MichelleLiggett,
Were you able to try the recommendations? If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the Warranty status.
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Mx860 won't print in black

Hi,
I have a MX860 printer and just in the last few days it won't print in black. I checked all my preference settings, did a deep nozzle clean, changed the large black print cartridge, did the test page and the black grid at the top didn't come in at all even though the rest of the colors did and did an alignment also. I'm thinking it's the print head but thought I would ask before purchasing a new one. Any help would greatly be appreciated.
Bubba888

Hi Bubba888,
If the black doesn't print after a few additional deep cleanings, you probably are dealing with a printhead issue. I recommend contacting us for all your available service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

C6150 Won't Print in Black

My c6150 all in one will not print in black. I put new black carts in, did two printhead cleanings and still it won't print in black. Any suggestions?
Thanks a bunch,
KegBag

You may have already performed some of the steps in the following document. But there are more there that might help in this case.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00722932&tmp_track_link=ot_recdoc/c00721052/en_...
Hopefully this document will help solve your problem.
Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Canon MG2100 won't print in black & white.

Similar Messages

Maybe you are looking for