Canon MG3550 driver for Yosemite

Printer can not be found since updating to Yosemite.
Please help.

A protocol called Bonjour is used to advertise the printer on your local network. If you don't see the MG in the Add printer window, then like other users who upgraded to Yosemite, you have a problem with Bonjour. Until a fix is supplied by Apple you can add your printer using the LPD protocol. To do so you will have to determine the IPv4 address being used by the MG. This can be determined via the control panel on the MG via Device Settings > Network Settings > WLAN Details. Once you have the IPv4 address, open Printers & Scanners and select to add. Then click the IP icon and enter the IPv4 address of the MG. Set the Protocol to Line Printer Daemon and leave the Queue field blank. Change the Name to MG3550 and select the Canon MG3500 series driver in the Use menu. Click Add to complete the printer creation. Now open a document to see if you can print to it.

Similar Messages

Need 3rd party lexmark driver for Yosemite

Lexmark does not have a driver for Yosemite for my S605 printer. Is there a third party driver I could use on my iMac?

Did you try the Generic PostScript and/or PCL ppd when adding the printer? Or even the drivers for 10.9, if you are able to install them?

Where can i find a compatible hp 3050a driver for yosemite operating system?

looking for yosemite compatible driver for my hp 3050a printer.

Tbone.
Check your other post.
http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/where-can-i-find-a-compatible-hp-3050a-d...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Epson 101 driver for Yosemite

The driver I downloaded from Epson website does not work with Yosemite
Once I click the .dmg it said....
EPSON Printer.mpkg” can’t be opened because it is from an unidentified developer.
Your security preferences allow installation of only apps from the Mac App Store and identified developers.
“EPSON Printer.mpkg” is on the disk image “ME-100Series_875W_MP.dmg”.
Safari downloaded this disk image today at 10:35 PM from download.ebz.epson.net.
Help !

Did you download this from the Epson web site? If not, trash it. If so, control - click on it and select open. You will probably be asked for your password.

Need Canon MP600 Driver for Macbook Pro Retina running OS10.9.1 Mavericks, Any Suggestions?

The Canon website says the MP600 printer is not supported after OS10.7 but they do not offer any advice on alternatives. I really need the basic print functions to print things such as web pages and documents and being able to use the scanner too would be nice. Other features I can live without. The printer is connected directly to the Macbook using USB. Any suggestions on using drivers already loaded as standard on my Mac or generics that I can find online would be appreciated.

Gutenprint for Mac OS X

Can anyone recommend a duplex black & white wifi printer that has a driver for Yosemite?

I was going to buy a Canon 6030 dw, but I don't think it's supported up to Yosemite.

About AirPrint
Then you won't need to worry about drivers.

HT201372 I am trying to create a bootable USB drive for Yosemite and the terminal is telling me /Volumes/Untitled is not a valid volume mount point. HELP!!!

I erased the USB drive and partitioned it as directed in order to create a bootable drive. When I type in the sudo command in the terminal, it is telling me that /Volumes/Untitled is not a valid volume mount point. HELP!!!

FYI
my process just completed: here is what I see when it is done... (the first you saw in my earlier post. It took about 15-20 minutes.
To continue we need to erase the disk at /Volumes/Recovery.
If you wish to continue type (Y) then press return: y
Erasing Disk: 0%... 10%... 20%... 30%...100%...
Copying installer files to disk...
Copy complete.
Making disk bootable...
Copying boot files...
Copy complete.
Done.

Canon printer LBP2900 need a driver for 10.9 macbook air

need a canon LBP2900 driver for macbook air 10.9

Hi @Dinobee
This document explains how to scan a document from a Mac running Yosemite. Although a full feature Yosemite driver is not available to download for your printer, you can still print and scan from the Mac with the driver from Apple Software Update. Follow the steps in this document to install the driver, and then scan from either Apple Preview, Apple Image Capture, or the Print and Scan window.
If you would like, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. I look forward to hear from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp psc 950 printer only prints black and white, no driver for Canon lpb 5000

Hi everyone,
I am trying to install my two printers on mac book pro.
Problem 1.
My HP psc 950 printer is only printing in a bad black and white quality - no color at all?? - any idea where I can download a printerdriver that is actually up to date? The one mac book has preinstalled seems not to be the right one?
Problem 2.
My may can´t find a driver for my other printer Canon LPB 5000 at all. I´ve already downloaded the canon drivers for Mac book - so I see a long list of Canon drivers but the LPB 5000 is not there and I don´t find any download of it in the web. I work with os x 10.7 and there is just an old mac driver for 10.6 to be found on the Canon website. I downloaded it but still does not work.
Hope someone can help. Both printers used to work fine on Windows but I am changing to Mac now and need to get them work.
Thanks,
K.

Canon LPB5000 driver for 10.7 is at http://support-au.canon.com.au/P/search?model=LASER+SHOT+LBP5000&menu=download&f ilter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E7
There is also this note: When using with OS X Lion, install this printer driver, and then register the printer. For information on how to register ... support-au.canon.com.au/contents/AU/EN/0100359005.html

Where I can get driver for Canon MF32x0????

I can't find it. Anybody can help me?

I had a look at the Canon Au web site and they show an MF3240, but for this model it seems that Canon doesn't provide a Mac OS X driver. I also checked the Canon UFR2 driver for OS X, which is used by some of the newer models of MF AIO's, but the 3200 series is not listed as a supported model.
PrintFab doesn't seem to offer a solution either, so you may be out of luck unless the Open Source community has something to offer.

Yosemite Driver for Canon LBP 2900

Hi there,
Now that Yosemite has been installed and working well, I am left with a non-functional Canon LBP2900. On Mavericks, it worked well with the patch but seems it doesn't carry across to the new OS. I have reset my printer settings and re-patched the system as per Mavericks but no joy.
Any tips? or lots of printers going into the bin!!!
Regards
Jafar

Re: I can't use canon LBP 2900 in Yosemite 10.10.
Wanderer75
Oct 21, 2014 4:17 AM
Re: I can't use canon LBP 2900 in Yosemite 10.10.
in response to Thet Aung
I finally solved the problem.
1. Delete your printer in Printers and scanners preferences.
2. Restart computer.
3. Download and install the following driver (version 3.67 has just been released for Yosemite): http://support-au.canon.com.au/contents/AU/EN/0100420705.html
4. Restart computer.
5. Download and install the patch appearing at step 3 on this page: http://macdaily.me/howto/how-to-install-canon-lbp2900-on-mac-os-x-mavericks/
6. Restart computer.
7. Connect the printer with USB, add the driver in Printers and scanners preferences, select the appropriate driver.
8. Enjoy the rest of the day.
It works for me!!!

Yosemite printer driver for Canon Pixma IP3000

This is not so much a question as a solution to getting my old Canon Pixma IP3000 working again after upgrading to Yosemite.
Although the printer is listed, when I wanted to add it I found no software for it from Apple. Phoning Canon they also said they have no software for the IP3000 and Yosemite. To make a long story short, after much trial and error trying out other drivers which were listed on "choose driver" I found that the IP4500 driver can be configured for cassette feed AND duplex and works on Yosemite. Hope this helps someone else to keep some of the older products going in our throw away society!

I just installed that driver on a 10.10 VM and also found that there is no Duplex Print & Margin menu - just Margin.
I then installed it on a 10.8 VM to be sure the lack of the menu was not due to using the 10.8 driver on 10.10. However I found that even on 10.8, there was no Duplex Print & Margin. So it would seem that duplex printing was not an option for the iP3500.
I then checked an alternate driver suite called Gutenprint and added the iP3500 Gutenprint printer. It also did not support the ability to print duplex.
But when I added another printer, this time using the Gutenprint iP3000 driver, there was the ability to print two sided from the Layout menu. So then I thought it might be worth checking if the Canon iP3000 driver also provides a duplex setting, but the last supported OS for this model was 10.6 so I did not even try to install that old driver on 10.10.
Here is a link to the Gutenprint driver if you would like to try that.

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

Canon selphy cp910 driver for mac yosemite

it appearrs that the selphy cp910 driver can not be used with mac-apple yosemite is there a fix coming?

B"H
Good day, bad news.
It would be very helpful & good business for Canon to make a Mac Yosemite driver for the Selphy CP910. We invested not so long ago in this little printer. It would be very nice to be able to use it.
Please Mrs. Ramona, Product Expert, can you please relay this request to the powers that be at Canon and make it happen???
Abundant Blessings,
Chaya

OSX Yosemite driver for Canon LBP3000

OSX Yosemite driver for Canon LBP3000 needed. When will one be available?

Hi smukhi!
I will be glad to assist you. The driver is now available for the commercial release of the OS X 10.10 (Yosemite) driver. I recommend uninstalling the previous driver before installing the latest driver. To uninstall the driver, please follow the instructions below:
1. Click the [Printers & Scanners] icon in [System Preferences].
2.Select the printer you use on [Printers], then click [-].
3. Delete the printers that are registered, then close the [Print & Scan] dialog box.
4. Open Finder application of your Mac OS X.
5. Select [Go] → [Go to Folder] from the menu bar.
6. Enter the following folder locations, click [Go], then delete the files and folders.
Delete Example: You can delete files and folders by dragging them to the [Trash] icon in the Dock.
Location
Files and folders to delete
/Library/Printers/Canon/
CUPSCAPT
/Library/LaunchAgents/
jp.co.canon.CUPSCAPT.BG.plist
/Library/Printers/PPDs/
Contents/Resources/
Delete all the following files in the folders.
CNMCxxxAUS.ppd.gz
(xxx is a model name starting with [LBP].)
When the [Authenticate] dialog box is displayed
Enter the administrator's name and password, and then click [OK].
7. Close all open windows.
8. Restart your computer and empty the Trash Bin.
The printer driver is uninstalled.
Next, go to the imageCLASS LBP6000 - Drivers & Software page, and then download the file CAPT Printer Driver Ver.3.67 for Mac OS X 10.5/10.6/10.7/... listed under the [Recommended for You] section.
After installing the printer, please follow the instructions below to add the printer:
1. Click the [Printers & Scanners] icon in [System Preferences].
2. Click [+].
3. Click [Default], and then select the printer to be used from the printer list.
4. Select [Select Printer Software] from [Print Using].
5. Select the printer to be used from [Printer Software], and then click [OK].
6. Click [Add].
7. Make sure that the printer to be used is displayed, and then close the [Print & Scan] dialog box.
The printer registration is now completed.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon MG3550 driver for Yosemite

Similar Messages

Maybe you are looking for