Canon MG5250 Scanner not working with OSX 10.7.2 HELP PLEASE

I have tried to get my canon mg5252 multifunction to scan, im using OSX Lion 10.7.2, I have tried downloading the canon drivers (mp 4.0.3 and ica driver 1.9.0) but still cant get it to work !
Any help is greatly appreciated !
Thanks
sc

Uninstall the device using Canon's instructions. Then assuming you are using a USB connection to connect it to your computer restart the computer in Safe Mode to clear some caches. Then restart the computer normally. Then connect the printer to the computer via USB and turn on the printer. The printer should then be seen in the Print & Scan preferences. If not run Software Update. To scan use Image Capture (it's preloaded on your computer) and scan using the Image Capture tool.
If you still have trouble then follow the instructions in Printing Overview OS X Lion.

Similar Messages

Vista Ultimate, Firefox 4.01 just installed. The back and forward buttons do not work with this new installation. Help please.

O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?

It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My ipod has just black screen and the home button is not working. what will i do? help please!

my ipod has just black screen and the home button is not working. what will i do? help please!

Try:
- iOS: Not responding or does not turn on
When it says place the iPodin recovery mode use this prgram.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why does my scanner not work with Yosemite

My father upgraded to Yosemite but now can't get his scanner to work with it. How can I advise him?

I have talked at length to Canon. Their support is normally very responsible and competent, but in this case, they say that they don't know if or when there will be a fix to the problem. All they suggest is that you download the drivers and reinstall them. They also suggest that you repair your disk permissions.
The problem is that after the first scan, the software tries to locate the scanner. After 90 seconds, there is a message saying that the scanner is in use by another application. Once you reply OK to that message, you can scan another document. So, it works, if you consider scanning a document every 90 seconds working. I don't.
The problem may well be Apple's, but resolution requires that Canon and Apple talk. They don't seem to be.

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

Realplayer Download Addon is not working with Latest Firefox 5.0? Please assist.

After updating firefox 5.0, real player download addon is not working with it. Have any fix available for this or any solution available. Because of real player addon is very easy to use to download video contents from any website.
Thanks,

The latest version of Real Player updated on July 12, 2011 addresses this problem. You must check for Real Player updates AFTER you install Firefox 5.
Click on the upper left hand corner of the Real Player screen to check for updates. After you download the newest version of Real Player, the video downloading feature will work again!
http://real.custhelp.com/app/answers/detail/a_id/8883/kw/firefox%205/p/9%2C

Canon MP510 scanner not available under 10.9, who can help?

Canon MP510 scanner not available under 10.9 since update, who can help?
Canon informed me that Apple does not support this device any more, apple informed to contact the manufacturer.....
Any ideas how to activate scan function again?
Printing is okay under 10.9 and under 10.8 scan+print was okay.

Canon has a scanner driver and the MP Navigator scanning application for the MP510 for OS X 10.8 so you could try installing them on your 10.9 Mac. I am not sure if either file is digitally signed, so Gatekeeper will block the installation. To install them, you can Control-click on the respective installer and select Open from the pop-up menu. You will then be given the option to install.
And for the record, Canon makes the drivers - not Apple, so it is Canon that is not supporting the MP510 on OS X 10.9.

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling

Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working

Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
The scanner works great in the Canon scanner software and other devices but not Acrobat.
When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
I had a HP scanner before and all options where there and worked great.
Anyone know of any fixes for this?
Cheers

The scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
There is the WIA Canoscan and a Canoscan 9000f listed and when you select either of these you get these messages.
also here is the twacker result with 2 entries

Canon Pixma MP495 not working with mini

I'm trying to use the scanner on my Canon Pixma MP495 with my Mac Mini. The printer works okay, but when I click on the scanner, I get an error that says reopeon or okay - MP Navigator EX quit unexpectedly.

I would like to add I might have the problem solved.
I found an older Windows forum from 2009 where another person had a similar problem and it was suggested to use the add 'local printer'. Of course, the wizard set it up so not sure what it did but I did what they suggested and the scanner finally works.
Also, when I went to print something, the preview picture came up and the door to the printer popped open but one of my ink cartridges is out so it couldn't print.....bummer.
At least I never got the 'driver not installed correctly' message.
As soon as I get a chance to get some more ink and try it, I'll post the results.
**fingers crossed it works**
Thanks~
squirt11

Epson scanner not work with Mountain Lion?

I have an Epson Expressio 1600Pro scanner with transparency adaptor. It has worked perfectly with previous Macs using OSX 10.4. I have recently bought a MacBook pro and upgraded it to OSX 10.8. I went to Epson's website to get a new driver etc. That tells you it can only be downloaded via Mac Software Update. That was duly done and installed. System prefs lists it under printer and scanners. OK
I have also installed Photoshop Elements 11 and expected to be able to scan direct to there but nothing seems possible. Going to Help says use Image capture or Preview. Yes! there is a small very rudimentary scanning window appears in both apps. Now the problem! Nothing happens. I have tried ALL the various meagre settings on offer, changing size, resolution, custom etc and all that happens is a small rectangle of a scan occurs but no resulting file.
I have been on to Epson who say ONLY image capture will work with 10.8 but as it is a 3rd party software they can offer no assistance. Well image capture does NOT work. I have spent all afternoon trying various things like restarting, unplugging, reconnecting etc etc nothing.
10.8 does seem very buggy. I have even had to stop using Mail and Safari simply because it doesn't work whereas Thunderbird and Firefox work very well.
But I digress, does anyone have any thoughts please?

The following comments are based on installing an Epson RX700 All-in-one printer/copier/scanner so they may not be applicable to you but, for what it's worth here they are. The RX700 scanner worked perfectly with Snow Leopard and then Lion but, when I changed to Mountain Lion, and used the app store to download and install the drivers, I lost the Epson scanner utility (ie. the user interface that gives you all the scanner options).
However, if I used System Preferences and then the Print and Scan option, it brought up a small window where I could select either Print or Scan. Selecting Scan or Open Scanner from this window then opens up a window with all the scanner options in it, including an overview scan. This window has the option to either Hide Details (all the detailed scanner options - resolution, size, output file name etc) or Show them. As far as I can see, this window is actually the Image Capture app, although it doesn't say so.
It might be a long shot but try changing the Auto Selection box in this window to one of the other options (eg. "Detect Separate Items") or setting the "Scan to" to a file.

Canon MP600 scanner not working - help!!

I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I've updated and installed all the drivers from Canon's website. I cannot figure out what is causing the problem, or how to rectify it?
Please offer any help you can. Thanks!

Hi all,
I had the same issue with a Canon MP600. Printing
did work, but it refused to scan with scanner not connected
message.
I updated all the drivers, no luck.
As a last resort, I changed the USB cable to a certified
USB 2.0 high speed one and it started scanning
I would suggest to try the following procedures:
- find a USB high speed cable
- connect just the mac and the printer
- test
If it it works it might be the old cable or some
interference with another USB device.
Reconnecting one at a time the other devices will
be the final step .
If it does not work also after having updated the
drivers and standalone with a Hi-speed USB cable
I have no additional clues, sorry.
Hope it helps

Cannon MP600 scanner not working with Mavericks.

Get this error message MPP navigator 304.pkg can’t be opened because it is from an unidentified developers.
No updated drivers at Cannon website. Printers side working fine. Had to open MP Navigator from Apps (right Faff to get scanner to work) Can not just press button on printer markes scan to scan any more.

Click on a model name below to access the download page.
A √ below represents the corresponding Canon product being compatible with that version of Windows
OS X
Mavericks
v10.9
OS X
Mountain Lion
v10.8
OS X
Lion
v10.7
MP990
MP980
MP970
MP830
MP640
MP640R
MP620
MP620B
MP610
MP600
MP560
MP530
MP520
MP510
MP499
MP495
MP490
MP480
MP470
MP460
MP280
MP270
MP250
MP240
MP230
MP210
MP190
MP180
MP140

Canon MG5250 Scanner not working with OSX 10.7.2 HELP PLEASE

Similar Messages

Maybe you are looking for