Canon MG5350 printing problem: missing parts of the image
I am trying to print a DVD sleeve which includes text and image and only the text is printing correctly. I have done a nozzle check and a print head realignment, this hasn't solved the problem.
Here is a screenshot of the original .doc and below it, a scan of the image as it prints.
Any help would be greatly appreciated!
UPDATE: I also deleted and re-installed the printer driver from the Canon site.
Then I tried to print something else and the FONT came out incorrectly.
I works ! Thanks for the tip. What I did is install the FS-800 driver (since there is no FS-820) and it works (with the ljet4 version). I was using the FS-850 version ... maybe my problem was from there ! Anyway ! Thanks, you pointed me in the good direction !
Have a nice day !
Similar Messages
-
My psc 1315xi wont print all of a document. everything i try to print is missing parts of the doc
my psc 1315xi wont print all of a document. Everything I try to print is missing sections of the document. It will print a lot of the document with missing words or letters. Office Depot had no trouble printing the documents. The color seems to be off as well. It prints gray and not black. It will not copy or print a test page. When I try to run a diagnosis it says that it is not in my hp software(?).
Hi,
It looks like you've done some troubleshooting. The attached document link has additional troubleshooting steps to try. See if one of these tips helps.
Troubleshooting Print Quality Issues
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP -
How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?
how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.
Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps! -
Commited date for missing parts in the production order
when i generate a prodution order and there are some missing parts for that material. its showing the list of all the missing parts but the commited date is coming out as 12/31/9999.
I maintained the the planned delivery time for all those components.but still its giving me this dateDear Deepu,
Check in OPJJ for your checking group and checking rule combination what's the scope of check
defined --->under this you must have included the check box for Check availability without
replenishment lead time. It Indicates whether, during the availability check, the system checks the
replenishment lead time.
Use
Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
Procedure
In the standard version, leave this field blank if you want the system to check the replenishment lead time.
Dependencies
If you want the system to check the replenishment lead time, you should make sure that you have entered a value in at least one of the following three fields in the material master:
GR (goods receipt) processing time (Purchasing view)
Planned delivery time (MRP I view)
GR processing time (MRP II view)
Otherwise, the system confirms every requirement.
If that check box is included then system proposes the date as 31.12.9999.
Just remove the check box setting and check once again in CO01 for material availability check.
Even If the check box is not included and if the End lead time (replenishment lead time)of that raw
material is before the order start date then you will not get any mssing part's list.
Suppose if the replenishment lead time is after the order start date means then you will get this raw
material under mssing parts list.
Replenishment lead time = Planned delivery start time + GR processing time of that raw material (this
starts from today).
Say let your finished product finish date be 30.03.2009 and order start date be 28.03.2009,and let the
planned delivery time be 15 days and GR processing time of the raw material be 5 days.
So in this case End lead time = 15+ 5 = 20 = 01.04.2009 starting from today ,so in this case you will
be getting this raw material under missing parts because its end lead time time is after the order start
date.Suppose if its before order start date you will not get in missing parts.(Even if the check box is not
included under RLT).
So check with this and revert back.
Regards
Mangalraj.S -
I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.
Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices. -
I am using a 27" iMac 3.2 GHz Intel Core 5, 8 GB Memory, running Yosemite 10.10.1.
The version of Acrobat that I am using is: Acrobat XI Version 11.0.10
After Preflighting a PDF, using Convert to CMYK, Flatten Transparency (high resolution) and Prepress Profile "Convert to CMYK only" the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image which is 300 dpi.
It is like the image isn't really 300 dpi but has been artificially boosted to that to avoid being tagged by Preflighting, but when Preflighting the file it knows the original resolution.
I have screen grabs which illustrate the problem perfectly but do not know how to post them, if indeed they can be.
Any help or comments gratefully received.Without the files and possibly screen prints, it is virtually impossible to assist you.
- Dov -
InDesign only showing part of the image
I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
In InDesign it looks like this:
When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
In InDesign it looks like this:
When I output to PDF:
The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.mafeiteng wrote:
I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
In InDesign it looks like this:
When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
In InDesign it looks like this:
When I output to PDF:
The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.
If I understand things correctly, you're placing client-supplied images into a new InDesign file that you're creating, so the only part of the workflow that you haven't created is the graphics. This logically leaves the container file innocent.
The question becomes "what's up with either the hardware or the graphics?" If the problem persists with the same graphic files and a new container file on a different user account on the same computer, it's possible that hardware is the villain. If it doesn't persist on a different computer, it's likely the hardware. If it does persist on a different computer, in a new container file, it's likely something in the graphics files.
It's not clear if the graphics card in your iMac is one of the models whose video RAM is "dedicated," that is, it doesn't share video RAM with the main RAM, or if it does share VRAM. If it shares RAM, it's possible that 4GB isn't sufficient to display all the open applications and their demands. If this is the cause, it's a hardware issue (insufficient RAM.)
Because the graphics print and convert to PDF without the problem, it would seem that the graphics are innocent, but perhaps something in the processing of these outputs causes the problem to disappear. For example, perhaps there's some flattening involved. Perhaps there's a clipping path or channel mask of some kind involved that affects the InDesign display? (Just fishing.)
Have you tried opening the graphics in their creating application and saving them to new names? Any difference in the behavior when those graphics are freshly-placed in InDesign, or when their links are updated?
Have you tried placing PDFs of the graphics? If they appear properly, can you crop them to achieve your requirements and hope the problem goes away after the deadline passes<G>?
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed? -
Is it possible to work only on a small part of the image in FCP ?
Hello,
I"m working on a DV film that I have made this winter, but on the original film, the image (video) is a lot darker on both top corners (I have some problems with my camera when I use it outside during the winter).
Is there any way to work only on a part of the image with a filter, instead of working on the whole image. I would like to work on thoses 2 darker spot without touching the rest of the image.
ThanksWhat you need to do is color correct just those two portions of the image. In a DaVinci and Final Touch this is called using "power windows." Now, you can do this one of two ways.
1) Layer the same clip on the timeline 3 times. V1, V2 and V3. Same start and end time on all clips. Now, use the 4-point garbage matte on the clips on the upper layers to isolate those sections and then apply the 3-way color corrector to brighten the images.
2) Colorista by Red Giant Software (www.redgiantsoftware.com) is a $200 color correction filter that allows you to layer color correction and isolate specific areas...using POWER WINDOWS in effect.
Shane -
How can I select only a small part of the image to clone or edit etc?
I want to select part of the image to clone is, and just edit the selected part. I know i can do this on photoshop but how do i do it on Aperture?
You use the "Retouche" brush in Aperture and set it to "clone".
Option-Click on the location you want to clone from to select a source, and then brush over the location where you want to clone to. The cloned region will follow the shape of the brushed area. You do not lasso the shape to to copy and paste it like in Photoshop.
For example: Duplicating a penguin: The sourcepoint has been set to the beak of the second penguin, and then I brushed along the path where I want to penguin clone to appear.
If I brush the whole area eventually the penguin will be copied completely. You'll have to experiment a bit with the brush size and softnees to ensure that the cloned object will blend in.
Regards
Léonie -
I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??
I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??
-
Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?
Solution discovered. Faulty connector cable. Tried a different one and it worked.
-
In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?
Check those boxes in the export dialogue - Exporting From iPhoto
LN -
I need to replace a color on my image with a specific color from another part of the image. How?!
I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image. So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is. I need to use a specific color so this does not help me. Does anyone know how to complete the task I am referring to?
Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything. So it's pretty old school...
Any help/feedback is greatly appreciated! Thank you.Hi brookehelene,
You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
(click on the screenshots below for larger views)
1. Select>Color Range
(i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
(there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
(in the screenshot below the white areas are selected and black areas are not)
(your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
3. After you press the okay in the color range dialog you'll see the selection (marching ants)
At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
to reveal a list and choose Solid Color.
Then use the eyedropper to sample a color from your image and press ok.
Change the Blend mode for the color fill layer to Color (top of the layers palette)
4. As you can see a lot has been selected besides the flower.
To refine the areas of color, paint on the layer mask with the paintbrush tool.
Use white to add the color or black to subtract the color
You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
and press the X key to switch between the two when painting on the layer mask.
Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
To change the color you can double click on the color fill icon in the layers panel.
You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do. -
Hello,
I have image present in ImageIcon. I want to select the part of the image in it using Mouse? I want to drag and select it....
Can anyone help me in finding this?
Thanks,
SriGeez, you post a question late Sunday night and want an answer early Monday morning. Contrary to public opinion many of us do have lives away from these forums.
What have you done on this requirement so far? Can you display the ImageIcon? You can use MouseListener and MouseMotionListener to define the subimage to select.
Start off with that and post specific questions for more detailed help.
Cheers
DB
Maybe you are looking for
-
How to load a xml file from a package inside of a jar file
hi@all my application has got a xml configuration file which is saved inside the package tree of the class that reads this file. when i`m developing using eclipse the class can find that file, everything works fine. but when i create a jar file of my
-
Sender JDBC Adapter and Synchronous Interfaces
Hello I have a Oracle/JDBC -> XI -> ECC/RFC scenario. The communication mode is Synchronous. In the Oracle database I have a table with a "STATUS" field. When JDBC Adapter Sends the rows from this table to the Integration Engine, it updates the "STA
-
How do you connect wireless keyboard to ipad?
How do you connect wireless keyboard to ipad?
-
Use of device configurations - update version of mobile component
Hello, We changed coded some changes in standard XMAM30. The name of this mobile component is XMAM30_LAPTOP_SR3 (type is application) with version 3.0003. This was added to a device configuration DC_MAM and assigned to a hierarchy. The users synced a
-
Problem Creating a query for a hierarchical tree. [using connect by prior]
Hi all, I have 2 tables. box (box_id, box_name) item(item_id, item_name, box_id) In a box there are several items. I want to create a hierachical tree to display items that are present in each box. LIKE: |---BOX1 | |----ITEM 1 | |----ITEM 2 | |---BOX