Canon MG5500 wont work on Imac

My Cannon MG5500 works on airprint from my Iphone 4S and ipad but when I try and print from my Mac it says the printer is not connected. Any ideas if I need to install drivers.

Hi dean2230,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your printer.
The first thing I would suggest is to shut down your computer and turn off your printer. Then do the reverse -- turn the printer on first, then your computer. If the issue still persists:
Check to make sure there are no jobs waiting to be printed. (Apple Menu > System Preferences > Printers & Scanners)
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
If all else fails, reset the printing system and install the printer again:
OS X Mavericks: Reset the printing system
http://support.apple.com/kb/PH14141
I hope this information helps ….
Cheers,
- Judy

Similar Messages

External isight wont work with imac g4

Hello,
I recently purchased a second hand isight camera using ebay.
I have an older imac g4 and the isight wont work with it at all.
I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
I'll explain exactly what happens and my troubleshooting so far...
The imac G4 is powered off, I plug in the external isight via firewire 400
The imac boots up into leopard 10.5.8 (using leopard assist)
In system profiler the isight is listed under the firewire tab.
( I can post system profiler info on this if its needed)
When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
Skype doesnt work.
I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
My G4 is connected via ethernet to an external router.
The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
(oh I used the application isight updater in core services but the install button is greyed out)
Any help would be amazing!!
Thanks!!!

Well, about all you can do would be to try a different and known good
FireWire cable, as a replacement for what may be a defective FW400
cable that came with the iSight camera. The cable can be defective
with one bad wire, yet sometimes appear available to the computer.
• How to Troubleshoot iSight (note external vs internal)
http://support.apple.com/kb/ht2090
• iMac G5 (iSight), & Intel-based iMac: Using External video camera:
http://support.apple.com/kb/HT2819
If you know of someone with an older Mac without a built-in iSight
camera, to test that one on, this may be an OK idea. Not sure if you
could get any traction by taking the camera to an Apple Specialist
and ask if they could check it out for you; that may also cost you.
{And since your computer does not officially support Leopard 10.5,
the other avenues of support would probably not be open to you.
At least not with the old iMac G4 and an unsupported 10.5 install.}
I have an external iSight camera which was included with my G4 Mini
1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
But I really have no need for it, since I don't use photobooth & so on.
And haven't tried that with my iMac G4 computers at all. No need to.
With a computer not equipped with an iSight camera, the Leopard 10.5
installation should still support the eventual addition of one; even if the
computer itself appears to not officially support a Leopard 10.5 install.
(You refer to Leopard Assist, a means to install in slower CPU Macs.)
The FW cable is about the most easy to consider at this point.
In the course of a year, I've found good replacement cables at
several places, even those at thrift stores in perfect shape, work
and I use them for FW external hard disk drives, primarily. To have
spares is nearly always a good idea. Test & keep known good ones.
I'm not certain how the external iSight FW camera may work on
a newer Intel-based 24" iMac with a built-in iSight camera, too.
Does your 24" computer have FireWire 400+800 ports? Can you
choose an external iSight camera and ignore the built-in one?
These secondary topics have probably been discussed in the other
forum area for Intel-based iMac computer models; if you chose to
try & use that camera with a model computer with one built-in...
• Apple - Support - Discussions: for Intel-based iMac
http://discussions.apple.com/category.jspa?categoryID=189
There is a possibility, if never tried and the iMac G4 computer was
acquired second-hand, that the FW port within it may be band; but
the cable is the first item since it is cheapest, in troubleshooting.
So, anyway, the hour is late here (1AM) so hopefully the matter
can be resolved with a known-good replacement FW400 cable.
You should not have to restart the iMac G4 (800?) model in order
to get a FireWire item to be recognized. It should appear in the
System Profiler's list under FireWire, such as things normally do.
Of course, the camera could be defective as well. Been some
time since they were available on sale, new from Apple...
You could ask around to find out if there is a way to use that
external iSight camera with your newer Intel-based 24" Mac
by someone having it ignore its own built-in camera; in a
way as to not affect its normal operation, that is.
Good luck & happy computing!
+{ edited 2x }+

IPod wont work with iMac but works in Vista

I have an 80GB iPod Classic that works perfect on my computer running Windows Vista and iTunes 7. I have only ever used it with iTunes.
My iPod's format is FAT32 (Windows). And it's running software Version 1.1.2 and disk use is enabled.
When i try and plug it into an iMac (iMac G5) running OS X 10.3.9 it doesn't work. It doesn't come up as an external drive so I can't access it as an external disk and it fails to work in iTunes.
I have upgraded the Mac to the latest version of iTunes but this still doesn't solve the problem. I tunes gives me the following error "iTunes has detected an iPod that appears to be corrupted...". This is not the case, my iPod is not corrupted.
How can i get my iPod to work on the Mac?

If you buy an iPod, you are Apple's customer whether you use Windows or Mac OS X. Therefore, your statement
nice how they screw their own customers.
makes zero sense.
If Apple products work in Windows for an extended period of time, this is because the most common and popular (by far) version of Windows is getting on 8 years old. And since XP is so prevalent, Apple has to support it, just like any other company that makes products that work with Windows. It is highly unlikely that Windows Vista will ever surpass XP in usage; Apple will no doubt continue to support XP with iTunes and iPods when XP is TEN years old.
For Mac OS X, Apple has been pushing the rate of development much faster. Therefore, Panther is already "old" technology, even if it was released after Windows XP. Panther is PowerPC-only and most active Macs (in the installed base) are now Intel-based, with 3 million new Intel Macs being added to the installed base every quarter. ALL Intel Macs use Tiger or Leopard. Most Power PC Mac users with supported hardware have at least upgraded to Tiger, if not Leopard. Therefore, only a small fraction of Mac users still use Panther day to day. SO... Tiger is obviously a good cutoff point for backward support, just as Windows XP is a good cutoff point on the Windows side. It's just common sense, not Apple trying to "screw customers."
It's not just Apple using this common sense. Many, if not most, third party software and hardware Mac products being released right now require Tiger or Leopard, just like with Apple.
As for your actual problem, I would try Restoring the iPod on the Windows side (assuming you have a copy of all the files on the PC). A Mac should be able to read FAT32 format, both in iTunes (using manual management) and as a hard drive using Finder. If you can get this to work, you can copy the iTunes media files onto the iPod as files (not through iTunes) and then transfer them to the Mac as files. Then load them into the Mac's iTunes library.
Continue using your Windows PC to sync the iPod. On the Mac side, use +manual management+ (do not sync).

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

If you have Apple care and the problem occured without misuse on your part ... it can be replaced without charge.

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

New iMac and iDVD just wont work!

All,
Just got a new iMac and iDVD just wont work, from creating a new project, or opening an old one, or trying to share from iMovie (HD)
If I try to do anything nothing seems to happen and when I close the program a window does appear and from there it just freezes.
Have deleted and reinstalled iDVD, repaired permissions, all up to date in my on software updates...any ideas?
Thanks
Zara

*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

IMac restored from external hard drive-password wont work

I just had my iMac wiped clean and migrated my information from an external hard drive however after migrating everything to the clean machine, the password wont work and when I attempt to reset it via the apple id, it wont go through even though I have checked and rechecked that I am using the correct information.
help!

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

OLD iMac 1.8 GHz PPC G5...running 10.3.9, mail wont work (vs 1.3.11)

I have had this computer running all the way up to snow leopard but it just about cant handle it and it sounds like it is going to turn into an airplane and take off!
So, today, I clean swiped the whole thing and put back on Panther that came with it. I updated it up to 10.3.9 but that is as far as I can go. I dont have any disks for Tiger and Im not going to buy them still for over $120 at this point.
My problem is...the mail wont work now. I have set up my mail accounts a million times....we have iPhones, iPads, iPods, multiple MacBook Pros, all the computers at my office are Macs and I upgrade all of them, set up the mail, etc. So basically, I know that my server settings, passwords, usernames, etc are all spot on.
Is this version of mail just so old that it isn't going to work right? Anyone else still running an ancient machine? Tips? Help? Also, is there anywhere that I can just download Tiger 10.4? Id love to get it updated to at least that OS so that my daughters can use the computer for games, etc but the version of flash that their sites is requiring isn't available until we are running at least 4.0.
So basically....mail not working and upgrade advice needed!
Any suggestions....TYIA!!! Im dying here...
Julie

Doug:
Your computer meets the minimum system requirements for Tiger. However, the major Operating Systems: Jaguar, Panther, Tiger, Leopard must be installed from an install disk, which, as Niel indicated, needs to be purchased. Updates within an OS, from 10.4.4 to 10.4.11 for example, can be installed either via Software Update or downloaded as stand-alone updates form the Apple website and then installed.
If you do not already own the Tiger install disk, you might consider Leopard instead, since your computer meets the technical specifications for Leopard, and the cost of Tiger and Leopard are essentially the same $129 from Apple.
I would suggest that you seriously consider upgrading your RAM. Although the RAM you have will run Tiger, it will run much better by boosting your RAM by installing at least one 1 GB module. Your compuuter will support 2 - 184-pin PC-3200 (400MHz) DDR SDRAM up to 1 GB each. You can upgrade them both or upgrade to 1.5 GB for now.
Please do not hesitate to post back should you have further questions.
Good luck.
cornelius

I have a dilema i use a programme called Mackeeper i accidentally moved several files to my trash,i would like to put the files back where they belong but put back option is in grey and wont work??

I have a dilema i use a programme called Mackeeper i accidentally moved several checked files to my trash BUT i didnt delete them,i would like to put the files back where they belong but the put back option is in grey and wont work?? i have spoken to Apple and to no avail !!!
Mackeeper moved my files to my trash so i pulled them out of my trash to my desktop it has copied them to my desktop as well as kept them in my trash!!
im so confused and things are not working properly anymore such as my google chrome for example...all my book marks are gone BUT i can go to the google file which is out of place on my desktop and view all my bookmarks data...ALL of my files still exist but they are just out of place now which is making it hard for certain options on my computer to work...
the files includeAccounts,address book plug-ins,addressbook,Adobe,AIM,Alfred,Anquet Maps,Apple,Asramsoftware,Audio,Automatically add to itunes,facebook,facebook 15-53-13-329,faxfresh,five details,flipping book photo album, font collections, fonts, forismatic,Garageband,Gimp,Google,Google 15-53-13-344,icloud,icons,idocument lite,ilife media browser,ilifepage layout,internet plug-ins,ip scanner,itext express,itunes,iweb,Keyboard layouts,Keychains,launch agents,Librarian,limit point software,logs,mail,mail 15-53-13-895,messages,metadata,mobile documents,mobiscope,moso,movie effects,mozilla,MPlayerx,mywebcamBroadcaster,Native instruments,Skype and LOADS more......
HOW do i get this stuff back to where it is supposed to go so that these programmes work properly again???? i also used delete and command but that did not work either,like i said i have not emptied my trash and ALL the info is there its just totally out of place and the put back option will not work sor some reason!!??? im running 10.8.5 imac someone PLEASE help me!!
i have not set up time machine either but i do back up to a site called backupblaze...

Step 1
Remove "MacKeeper" as follows.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
Failure to remove MacKeeper will result from neglecting any one of these points:
Quit MacKeeper before dragging it to the Trash.
Don't empty the Trash after dragging the application to it. Let MacKeeper delete itself.
Don't try to drag the MacKeeper icon in the Dock to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
Step 2
Restore from the last backup that predates the unwanted changes.

Epson RS595 wont print on iMac

Altho this almost new combo printer works fine on my iBook, it wont work on my iMac, its usual home. I've reinstalled the printer, redone the drivers, tried another cable, done permissions, checked the system pref. When I
click Print, the logo appears on the dock, but after 3 seconds of shaking, stops still. The printer dialogue box reports printer 'stopped'. Its still scans OK. What else should I try?

interscot1 wrote:
nothing at all happens
Did you run any updates?
Does this mean if you hit the print button, nothing happens? If so, the probable cause of this is that the /Library/Caches/Epson folder is missing.
There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
hope this helps.
Also, please update your profile.

Pages mysteriously changed its name to Word and now wont work

Hello, Pages wont work anymore and i cannot reinstall
It is now called Word and wont open any documents...
please help

Curious, as far as I know, we aren't april 1st
Yvan KOENIG (VALLAURIS, France) mercredi 16 janvier 2011 23:30:09
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to get Canon Printer to work wired?

I have a canon wireless printer. I just got a cable for it as i want to not use wifi to print from my computer.
How do i get my Canon printer to work with the cable in it.
computer is a IMAc
printer canon MP560 colour
I have cable in it now. How do i get it to work wired to computer? thanks

System Preferences - Printing & Scanning highlight your printer and right click and choose Reset Printing System. Next turn off the printer, then restart the computer in Safe Mode which will clear some caches. To restart in Safe Mode, simply hold down the Shift Key when you hear the startup tone until a progress bar appears. Then shut down the computer, connect the USB cable from the printer to the computer and start the compute normally, then turn on the printer and your iMac should find it. If your computer does not find the printer follow Apple's instructions for doing so.

Garage band wont work, need to install midi or audio drivers?

tried backing up my comp to install OSX leopard but failed. now garage band wont work! I keep getting this message...also want to know if its possible to upgrade to osx leopard with a 4th gen macbook that runs osx 10.4.11
*garageband has detected a possible conflict between one or more third party midi or audio drivers.*
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer. For instructions on removing older drivers, consult the manufacturers' documentation.

Im having the same problem, I upgraded my IMAC and was using tiger and I upgraded it to MAC 10.5.7, now GarageBand wont work saying my midi and audio drivers arent correct. My Reason 4.0 wont start either saying the same thing failed to open the midi library. My Protools works fine but I dont know how to update the audio and midi drivers that it matches the software I uploaded. I also went to the audio midi set up and it read, Audio MIDI Setup was unable to launch the MIDI Server. This means that you will be unable to view or edit your MIDI configurations.
Improperly written MIDI drivers can prevent the MIDI Server from launching successfully. If you have recently installed a new MIDI driver, try uninstalling it and then relaunching Audio MIDI Setup. If Audio MIDI Setup works correctly after that, then please contact the driver's manufacturer for further support.

Fast Start Quicktime Movies Wont Work

I dont know why Fast Start Quicktime movies wont work in iWeb. This exact same file I used in a site I created using Dreamweaver began the movie as soon as it reached a point where the entire movie could be viewed. Why not in iWeb?
http://catchthemoment.net/simpsons/simpsons/Valentines.html
iMac G5 Mac OS X (10.3.9)

For whatever reason, iWeb publishes the quicktime movies with the autostart attribute at "false". To enable autostart, you will need to edit the html file after publishing and set the autostart attribute to "true". Even though autostart may have been enabled within the movie encoding process ("in the file"), I believe that this property is allowed to be overridden by the html attributes within which the file is published.
There is a table of all the attributes that can be changed floating around here somewhere. Keep in mind that these post-publishing changes that you might make will be overwritten in any subsequent changes that you might make to the page within iWeb.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

Canon MG5500 wont work on Imac

Similar Messages

Maybe you are looking for