Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

Similar Messages

ISight Camera not working after Leopard install

On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
Any ideas?

Hi,
I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
thanks!

Photo Booth not working after Leopard install

I have a mac mini and a ViewSonic VX2235wmb (LCD with a usb web cam built in). Before installing Leopard, the web cam worked with iChat and Photo Booth, without the need for any additional drivers. After installing Leopard, iChat works, but not Photo Booth. Here's what I get when I open the app:
http://www.davidsilva.net/photobooth.png
I've tried the 3rd party driver apps, but I get the same results. Any suggestions?

I have the exact same problem with the ViewSonic VX2255wmb (LCD with a usb web cam built in).
On Leopard it works fine with iChat, but does the same squiggly mess as your snapshot when run with Photo Booth.

IMac LCD not working after Leopard install

So I have a family pack and installed leopard on three computers so far and they all took forever, so I went to install on my iMac G4 1.25, 1 gig RAM, and I got the install started and when I returned the screen was black. I restarted and nothing. I finally got the computer hooked up to a plasma I have at my house and sure enough the install went just fine. Long story short, my comp is just fine, the LCD just doesn't show anything. The vid card is fine if it shows up on an external monitor, the LCD is connected and functioning because I can adjust the brightness and that still works, just no video
I called AppleCare and was on the phone for, no joke, 1:37:39, WOW, took forever, the guy ended up telling me that it is out of warranty and I need to pay to have it fixed. Anyone have any ideas or what to do?

Anyone have this similar problem? or know what I need to do?

IChat not working after leopard install

I installed leopard yesterday and have found yet another problem. Has anyone experienced the following?
I can open iChat. I can view the contact window and check visuals/microphones etc
However i cant:
Add/Delete contacts - and there are no contacts availible so i can talk to anyone
Access toolbar - On every menu in the tool bar every option is faded - such as buddies/format - so i cant select anything from there
I can effectivly sit and stare at myself. Which is only fun for like the first 5 mins.

Hi,
I am going to ask you to recall as clearly as possible what you did at these steps
http://www.siriusaddict.com/ichat.html
These are the Start up Screens.
They tend to presume you are going to set up a AIM or @mac name before setting up a Jabber one.
Did you set up an AIM or @mac name first ?
Did you click through those screens and then do it in iChat > Preferences ?
Please detail as much as you can remember.
In the iChat menu > Accounts is the Jabber account/screen name Logged in ?
In the Address Book doe your My Card now have the Jabber Screen name added to the info ?
9:47 PM Thursday; December 6, 2007

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

IMessage not working after IOS7 install?

iMessage not working after IOS7 install?

Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

Canon LBP5000 does not work after Leopard Upgrade

Hi all,
We have a Canon LBP5000 that is directly connected to one of our iMac's and worked like a charm when we were using Tiger. After upgrading to Leopard, everything went weird. It is still installed but when we tried printing, we get a 'Load Paper' warning from the printer. After checking to make sure that the default paper was all in A4 format it still wouldn't print. We then tried hooking it up to an Airport Express to share and while trying to add it via Bonjour, an Error 9672. We're seriously looking at getting a new clour laser printer that works with Leopard as at this point in time, there is yet to be found a driver from Canon that works with Leopard. Any suggestions of colour laser printers that work with Leopard or solutions to our problems ?

Hi Donny/PJB,
I did look and googled the drivers but the European site has outdated ones. We were actually using Japanese drivers CAPT (Ver. 1.60) for Tiger but it doesn't work now for Leopard. PJB, thanks for pointing out your post and I had a run through the Japanese site but it's all in Japanese
Anyway, I basically used common sense and updated the CAPT to (Ver. 1.61) but it still doesn't work after installing it. Every time I try to print or so a test print, the progress went Printing to Stopped.
When we click Resume it doesn't do anything and after 4 clicks, there was a short 'Fatal: Failed to load module' message pops up in the Print Queue dialog box. Has anyone actually have a Canon LBP 5000 printer that has worked with Leopard ? That is my question really...sigh.

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

TS1702 Certain apps will not work after ios6 install.

Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Canon S750 printer not working after upgrading to Leopard

Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

Canon MP830 scanner does not work with Leopard

Hi,
I have a Canon MP830. The printer function works fine but the scanner function does not work anymore since I've installed Leopard. From time to time it seems to work, randomly, ... but most of the time, if I use the MP830 navigator software and try to scan in a batch (from the tray), I get an error message saying "Het scannen is mislukt" (dutch for: Scanning process failed).
I hope that Apple and/or Canon are working on updated drivers because this is quite annoying... Plenty of fancy features in Leopard, but the easy, all-day features don't work
This is maybe not the right place to mention this comment but:
After I've installed iCal, it crashes everytime (randomly) when i click on the details of a calendar item... and generates an error message report... I can imagine I am not the only one who has this problem. Never had this before when using Tiger.
Regards,
F.

Actually, Canon has been providing various updates throughout the month of November. Go to www.canonusa.com, place your cursor over "downloads" and when a drop down menu is presented, click on "consumer." You might have to be patient, the site has been slow lately. Anyway, click on the pull downs in the middle of the page to select your printer. When the next page is presented, select MAC OS X from the pull down menu and you'll see the drivers and updated applications.
Over the weekend, I purchased an MP610. After performing the installation of files from the CD, I then downloaded and installed drivers and applications and the printer seems to work just fine, to include scanning, copying, etc.
Hope this helps,
Jimmy

Canon MP 600 Printer not working after Leopard Install

Similar Messages

Maybe you are looking for