Canon MP Navigator EX 4.1 opener failure message

Hello community,
yesterday i try to use the Canon MP Navigator EX 4.1 for my MX410. The actual Canon drivers are installed.
Everytime i get the same failuer message:
MP Navigator EX kann nicht gestartet werden. Überprüfen Sie die folgenden Punkte:
1. Diese Software unterstützt folgende Modelle. Stellen Sie sicher, dass Ihr Modell aufgelistet ist.
Canon MP493 series
Canon MX360 series
Canon MX410 series
Canon MX420 series
Canon MX880 series
Ist Ihr Modell nicht aufgelistet, installieren Sie die entsprechende Software MP Navigator oder MP Navigator EX.
2. Ein Ihr Modell unterstützender MP-Treiber/Scanner-Treiber ist installiert.
3. Ihr Modell ist ordnungsgemäß mit dem Computer verbunden und die Spannungsversorgung gegebenenfalls eingeschaltet.
4. Entfernen Sie gegebenenfalls das USB-Kabel und schließen Sie es wieder an.
Any idea how to fix this?

Maybe it´s a little bit old, but maybe I can help someone with this
You only had the MP Navigator Software installed. You need to additionally install
http://www.canon.de/Support/Consumer_Products/products/scanners/LiDE_series/Cano Scan_LiDE_110.aspx?DLtcmuri=tcm:83-956668&page=1&type=download

Similar Messages

Why can't i open my message?

Hi,
I sent date over from my old phone to my Nokia 6110 Navigator and when I open the message it says I can't open a .sis file. What is that? and what do i do to fix that problem?
thankyou

to be specific, it says can not open DataMover.sis
I do not know what that is or how to get it to open. Please help

Canon MP610 - MP Navigator EX will not open - crashes

So I bought my MP610 yesterday, came home, unpacked and set it up, installed software and drivers - all I want to do is scan something important but MP Navigator EX refuses to open. I went to the Canon site, downloaded and installed latest drivers etc. but the result is always the same... whenever i double click the MP Navigator EX application I get a message saying -
The application MP Navigator EX 1.0 quit unexpectedly and when I click on the option to Reopen I get -
The application MP Navigator EX 1.0 quit unexpectedly after it was reopened
- This is the Error Report -
It's 8 pages long so I think it's best not to post it! However, these are the first two lines -
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x58000000
If anyone can divine error reports I would be happy to post the lot!
Please help - it's so frustrating to buy a product and follow all the instructions to the letter and then not be able to use the machine!
Cheers
Tricia

Hi PaHu,
I think I'm getting myself into the deep and sticky here. I've not used Image Capture before so I read through the Help files before I started - it seemed quite straightforward and I was able to set Adobe Photoshop 7 as the app. that the print colour icon on the MP610 'links' to (i.e. the button that is either 'colour' or 'Black') I also changed the field next to 'Automatic Task" from Preview.app to Adobe Photoshop 7. However, as soon as I clicked on overview and selected the area I wanted to scan (even though I had two photos on the platen I could only select an area of one of them - is this normal?) and then clicked the Scan button I got the message advising 'The application Image Capture unexpectedly quit. Nothing else is affected blah blah blah.
I went to Finder and double clicked Image Capture, this brought up the Scan dialogue window headed 'Canon MP610 Series' The fields are -
Download to:
Name:
Format:
Automatic Task:
Occurs after scanning
Then there are two buttons at the bottom of the dialogue box - the one on the left says Options...
the one on the right says Scan...
Clicking either of these buttons causes the return of the dreaded message 'The application Image Capture unexpectedly quit etc. etc.
It seems that whether I use MP Navigator EX, Preview or Image Capture as soon as I try to Scan it causes the app. to 'unexpectedly' quit. I've never had something like this happen before so I'm not sure what could possibly be causing it.
Should I uninstall the whole Canon Utilities folder and start from scratch - I just can't work out what's going on at all.
I'll be back on the boards later this morning but that's it for me for tonight!
Cheers
Tricia

Canon iR C2380i Failure Message

Hi,
I'm trying to setup my laptop so I can print wireless via a Canon iR C2380i. I'm running OS X 10.6.7 on a MacBook Pro i5.
The problem is when I'm trying to print a document, I get the failure message "AN ERROR OCCURRED.: -50" and then a print with the same message is printed.
I'm using the PS v3.20 driver as I read this would be the best to use.
Anyone has an idea what to do?
Thanks,
Mads

Hello and welcome to Apple Discussions.
The -50 error can occur when you have selected the wrong IP protocol when creating the print queue. The PS v3 and UFR2 v2 drivers prefer the LPD protocol. If you created the IP queue using IPP then this can cause the error. So if you did select IPP for the protocol, then delete the current queue and add it again, this time selecting IP > LPD.
The cause of the error can be that the copier does not support the printer language of the driver being used. I agree that PS is the best driver to use but you need to ensure that the copier does support this print language. You can confirm this by opening a web browser and typing the IP address of the iR C2380. This will open the internal web page of the copier, called Remote UI. With this open, down the left column you will see a variety of buttons. Select the one that says Add Func (short for Additional Functions). In the expanded list then select Custom Settings. Now in the right pane you should see the heading of Printer Settings. Under this will be the protocols supported. You will see UFRII but you also want to see PS (short for Postscript). If you don't see PS then you will have to use the UFRII driver on the Mac. The latest version, 2.24, resolves an issue with OS X 10.6.7 where the document would not print due to the default Quality Setting.
If the iR C2380i does have Postscript and changing the PS driver print queue to LPD still causes an error then I may need some more information about the network setup. You mention using wireless. Do you know if the iR C2380i is connecting via Ethernet to the same wireless router that the Mac is using?

Canon MP Navigator Stopped Working (MX870)

Running Windows7, 64 bit Oper System
Canon MX870
Scanning was not an issue prior to a few days ago. No new software or programs have been installed.
Went to scan a document and scanning looked like it was working, then it greyed out and received error message: Canon MP Navigator EX has stopped working.
Searched internet for solutions and tried them. Nothing works. I've gone as far to un-install all Canon products and utilities, even went into registry and searched and removed everything I thought I could related to Canon.
Still receive error. What do I do now?
Guess I've pretty much stumped the panal since there's been no response
Solved!
Go to Solution.

Hi jealkon,
There may be a third party scanner driver interfering with MP navigator. Please try the following:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C: ).
3. Click the down arrow beside Windows to open the folder
4. Highlight the twain_32 folder.
5. The folder should have 2 folders that start with PIXMA MX870 and a file called wiatwain.ds. Any other folders or files should be dragged to the desktop.
6. Reboot the computer and try scanning again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi, I've recently bought an iPad2 and can't get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading. Apparently it is

Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Can not connect to the App store I keep getting a connection failure message. Mail and Safari are working fine. Also Iphoto wont update to newer version and itunes does open up properly.

I have recently bought a new imac. Imported all my files etc. from my G5 using Timemachine.
Iphoto requires updating but wont!
itunes wont open up properly the text is wrong!!
I keep getting a connection failure message when trying to visit the App store.
Safari and Mail are working fine.
My Apple Id is also fine as it works with my ipad.
Any suggestions?

Hello Ben, see if this might be it...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130

Images from Canon 7D mark 2 will not open in Photoshop CS6

Images from Canon 7D mark 2 will not open in Photoshop CS6

Hi Ferdinand12345,
Cannon 7D mark II has been included in the ACR 8.7. I would advise you to wait for the 8.7 camera raw to release.
In the meanwhile you can go to labs.adobe.com and download the 8.7 DNG converter and convert the files to DNG and then try to import.
Thanks

I am stumped! Can't open library module- failure message and can't start Ligthroom 5.7 anymore: "[String "unarchived table s"]:6 : attempt to compare nil with boolean. - Nothing is working anymore! Who can help me?

My system:
Windows 7
Lightroom 5.7
I allready tried to load an older catalog backup, but that does not help.
The failure message occurs during the starting process while trying to Open the library:
"[String "unarchived table s"]:6 : attempt to compare nil with boolean.
Nothing is working anymore! Who can help me?
Thank you for your help!

Ask on the Microsoft forums, as it's their software you're having problems with:
http://answers.microsoft.com/en-us/mac

"canon mp navigator ex has stopped working" cannot get this to work - fresh install on windows 8.1

Trying to get LiDE 110 scanner working on my laptop. I keep getting this message once scan is complete "canon mp navigator ex has stopped working" and then a corrupted pdf is saved - fresh install on windows 8.1 I have used most up to date drivers and software and tried these two "fixes" from an internet search on this topic (it seems to be a common problem that hasn't been addressed by Canon) - I'm on the verge of returning the scanner!! 1) Delete this file: C:\Users\<user name>\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN. RESULT - "My Web Sites on MSN" does not exist in that folder on my computer. 2)Remove "sdc330Twain.ds" from windows Twain-32 folder RESULT - didn't have any effect Thank you, in anticipation!

Currently running the scanner on "Advanced scan to pdf" but would like to have access to the canon software with more options

How do I download Canon MP Navigator EX 3.1 scanner onto my Mac laptop. the downloads aren't downloading. Thanks.

I am trying to download Canon MP Navigator EX 3.1 scanner onto my Macbook Pro with no luck.
I read there are difficulties doing this on Mac.
Has anyone found a way to do this?
Looking for help; thanks

You don't want to install that software anyway because it's not fully compatible with Mountain Lion.

Canon MP Navigator stopped working.

Canon MP Navigator stopped working. twain_32 folder contains only wiatwain.ds and CNQ4507. No PIXMA MX870 were present. Please advise.

Hi bcb,
Please try downloading the updated MP Navigator from the following website:
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx870#Driver...
If the error remains afterward, or there is any difficulty with the procedure, please visit the link below for further assistance. Thanks so much!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader.

My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help!

My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help! I have scanned thousands of old photos over the last few months without problem. I scanned several full pages from photo albums right before this problem began. I wonder if there is some sort of memory which is not being cleared. I have researched everything I can findto no avail. Any ideas?

I'm not familiar with this software, but if your scanner is supported, you can achieve this task via Preview.app.
Printer and scanner software available for download
http://support.apple.com/kb/HT3669#gestetner
I believe your model would fall under the MX880 series, and if that's correct, you'll be all set once you learn Preview's way of scanning.
Best of luck!

Canon MP Navigator

Hi
I cannot install Canon MP Navigator MX 340 on my Mac OS X 10.7 Lion.
Someone could help?
Thank you.
Francis

Do you have version 3.1.3 of MP Navigator? As you will see via this link, this latest version was released to support Mac OS X 10.7.

Canon MP Navigator EX 4.1 opener failure message

Similar Messages

Maybe you are looking for