Canon MP490. Right side of paper feeding but not left side therefore creating error paper jam
canonMP490 printer, Right side of paper feeding into printer but not left side of paper creating paper jam. error paper jam
Hi kyle,
To try and resolve the issue, please unplug the printer, then follow these steps:
1. With a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.
2. Look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
3. Remove and reseat all of the ink cartridges in the printer.
Once all of these steps have been performed, please plug the printer back in and perform a roller cleaning on the unit by following the steps located at the link below:
PIXMA MP490 Roller Cleaning
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I am super frustrated with Safari in ios 7. I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex look of the tabbed windows. So I can see the pages. Hope this is making sense. Why am I not seeing the pages button on the bottom right of Safari?
Thanks!Bummer! Hopefully this will change in the future. At least I know now that I am not crazy for not seeing the pages icon! Thanks so much :)
-
"-" sign displays in right side in screen - we want in left side.
Experts.
When we are running on SAP Screen in earlier system any where if you see negative value,
the sign will be shown in " Left Side" of the number like ( Example : - 3451.00 )
We are on ECC 6.0
when we see similar case in ECC 6.0 system it shows as 3451.00 -
Requirement :
in ECC 6.0 also we want to see "-" sign on left side on SAP Screens.
RegardsHi Dudes,
I want to post the WHT tax transactions directly at the time payment in Cash journal(FBCJ) transactions.
Ex: Payment of Stationery expenses
Stationery Exp Dr 100
Cash a/c 90
WHT Tax 10
I don't want to route this transaction through a Vendor and I want to post it directly and at the time of posting system has to display the above accounting entry.
what settings required to get the above result?
Thanks
MBN -
I run Firefox 29.0.1 on Windows 7 (64 bit) and I get the "Firefox is already running but not responding. In order to open the program you must close the existing window." error. EVERY TIME I try to start Firefox. The posted solution works to start the program, but it is not a permanent solution. I go through the Task Manager and end the old Firefox process, then I can open a new window. While working, I can open multiple tabs and multiple windows, everything seems to (usually) work the way it should. Then after I completely exit Firefox, in order to open the program again I need to fix the SAME error again. Every time. It doesn't seem to hurt anything really, but it is quite annoying.
I used to get this same error on some of the older Firefox versions but it was only once in a while. With the new 29.0.1 it is literally EVERY TIME I TRY TO RUN FIREFOX!!!!
So, down to the big question: is there a permanent fix for this yet? Or will there be one included in the next version update? Or am I going to have to go back to Internet Explorer? I know I am not alone in this experience; i've seen several other users posting similar questions but none of them received satisfactory answers. So what's the story here, team Firefox?'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
This is not a cure but will make it easier if Firefox locks up. -
it was working fine before and then 1 day i loaded firefox and now i can only see 1 side unless i i use full screen mode, please can any1 help me
it looks like the left hand margin is way to big but i hav already looked at this and it is not the problem, and ive tried zooming in and out aswell and reseting the zoom ectHi - I think this is related to the Babylon Toolbar
Right Click on the toolbar in the grey area this is at top of the screen - If the Babylon Toolbar is ticked deselect it and all becomes well.
Cityjet -
My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Fixed div that floats right works fine in IE but floats left in other browsers
I have a div that I want to float right and have remain in that position as a user strolls down the screen. I set the position to fixed which works fine in IE8 but when I view it in other browsers (chrome, safari, firefox) the div does stay in position but it floats to the left.
I believe it's just a simple setting that I'm not familiar with.
Thanks for your help in advance.You can't float a fixed division. Use margins instead.
http://alt-web.com/DEMOS/CSS2-Sticky-Text.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
My Canon MF4100 works connected direct to iMac, but not through Time Capsule
Hello, I cant seem to get my canon laser printer to work when connected to the time capsule. It works fine when connected directly to the Mac. I have downloaded the most recent drivers from the Canon website. I have tried almost every solution I can find: deleted all printers, reinstalled, installed connected directly to the Mac then try to add through time capsule, restarted time capsule, reset time capsule, etc and nothing seems to work.
I also have a PC connected to the time capsule as well and the printer is not visible to add on the PC but I believe once I can get it to work on the Mac the PC will work. I am assuming I have a printer that is not compatible but it works perfectly well and dont want to spend another 300 on a printer. Very frustrated please help. Thanks!You need to install Bonjour Print Services on the PC to make it work.
The MF4100 might not be TC compatible. You might be able to use a powered USB hub with the TC, or use a WiFi print server (these can be found quite cheaply). -
My side comes up with a inch and a half box which cannot be expanded or worked with in any way. If I change users it works fine. I cannot access my favorites.
You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
-
HP Officejet PRO 8600 paper feed takes over 2 minutes to pick up paper on print job
Once you hit print it takes 2 minutes and 18 seconds for the printer to pick up the paper and print the document. If there are multiple pages for the print job, the second and subsequent pages print immediately after the first one finally, finally prints. I cleaned the rollers, checked for software upgrades, reset the printer, tried all different paper weights, etc.
Hi , and welcome to the HP Forums! I see you are experiencing print speed issues. I would like to help! Do you have the same issues when making a copy, as opposed to a print? I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums! -
Podcast episode in iTunes feed but not on preview page
I have been experiencing different behavior with my podcast in the iTunes store this week. My latest two episodes took a couple of days to update in the iTunes feed when for the past two months they have appeared within an hour. What concerns me is that they are not displaying on the preview page for my podcast in the iTunes store, even the one that was published two and a half days ago. Apple's email support persists in telling me how to submit a podcast to the store and suggesting that I phone support and ask my question for a fee. Liberated Syndication tells me that the feed URL is accurate and that the episodes in question have been published. It also says several of its customers are experiencing this problem currently with iTunes.
Any ideas?
My feed URL is http://astroinsight.libsyn.com
My iTunes URL is http://itunes.apple.com/us/podcast/astroinsights-podcast/id479652731Your feed is at http://www.cooksux.com/theahhashow/podcast/podcastblaster.xml
iTunes is unable to read this feed because there is a fatal error in the episode of 27 November. The 'itunes:subtitle' tag contains an ampersand ('&') by itself - because an ampersand indicates the beginning of a code sequence which is never completed, and this renders the feed unreadable. You need instead to use the code
&
as you have in fact done elsewhere. Since this is in episode 5 this is why your subscription stopped at episode 4. I'm not clear how the Store has managed to keep updating, except that the Store and the iTunes application are quite different things and it may be that the Store software has been arranged to ignore this error. Anyway, make the change and it will work again. (Make sure there aren't any more instances of this.) -
8600 paper feed picks up 3 to 4 sheets of paper when printing
When printing, the 8600 officejet pro printer picks up 3 / 4 pages of blank paper in addition to the original that is printing. The condition is getting worse. This condition occurs when printing one page or multiple pages. Frustrating.
Hi JK73,
This sounds like a mispick error. This VIDEO might help in solving your issue. I would start at minute 3:40 for the most pertinent information.
I work on behalf of HP. -
In Mail, can see messages from RSS feed but not my e-mail account
Mac OS 10.5.8, Mail 3.6. Turned on the computer and could not see any e-mails, though computer idnicated there were a few waiting for me. Found the messages in finder, but can'r figure out how to get mail to see them. Receieved some RSS ["apple news"] emaages and they show up fine. Tried "rebuiding" & "reindexing" and re-importing to no avail. Any ideas?
Here is the new incoming server info to be changed in the accounts preferences box.
imap.mail.me.com
The old one is mail.me.com
The only possible problem I see is that sometimes the incoming mail server cannot be changed and you might have to create a new account, but I think,and I'm not sure, that this deletes your messages in the mail program, so back up before you try this. Just in case.
Hope this helps. -
Podcast Image Shows Up In Feed But Not In Store
I just got my Podcast approved this morning. All excited, I checked it in the Itunes Store and the artowrk is not there.
For some reason, when you subscribe, the image does shows up. So the feed has the image, just the Itunes store does not.
Here is the Feed:
http://jeffreybuettner.com/feed/podcast/
Itunes Store Link:
https://itunes.apple.com/us/podcast/running-with-real-estate/id805017790
Link to the 1400x1400 Image: http://jeffreybuettner.com/wp-content/uploads/2014/01/Running-With-Real-Estate-1 .png
Thoughts?The image is correctly referenced in your feed. It's quite normal for the image to take some days to show up in the Store after a new podcast as first appeared.
-
KDE starting but not showing (and more KDE errors)
Hi!
Yesterday I had a problem with an upgrade and I found the problem was libdbusmenu.
The solution I foun on the internet was
sudo pacman -Rdd libdbusmenu && sudo pacman -Syu
so I did it
The problem is that now, after rebooting I can't start KDE (or at least it doesn't appear):
$ startkde
KDE seems to be already running on this display.
I can't start any KDE app, for example opening settings results in a window saying
System Settings was unable to find any views, and hence has nothing to display.
Also the keyboard layout has changed for example
Everytime I run something in terminal related with pacman or yaourt I get this error:
missing 'libdbusmenu' dependency for 'lightread'
I've uninstalled lightread and the error does not appear any more but I'm still the same
Tried rebooting and starting fallback but still the same
Any solution?
Working on 3.14.1-1-ARCH
Any further information needed please, ask for it
I would be very pleased if you could help me to solve this as I don't have any idea how to proceed.
I tried installing again libdbusmenu from AUR but it doesn't exist now
Thanks!Andy_Crowd wrote:
Sometimes it can be a problem with user settings, to test it just create a new user, login with it and try to start KDE.
It is few ways to start a desktop environment.
I am using few desktop managers and using a command line to start them depends on which I want to use. I don't use a GUI login managers.
For KDE you can try
killall startkd
killall X
startx /usr/bin/startkde
For my openbox for example
# For a normal start
startx /usr/bin/openbox-session
# For a failsafe start
startx /usr/bin/openbox
Of course you can make aliases for them.
I hope this might help.
It seems we're getting closer to the problem.
Starting with
sudo startx /usr/bin/startkde
makes KDE start correctly while starting with
startx /usr/bin/startkde
makes it start the wrong way.
Could it be possibly be a configuration error right?
This is the output of my ~/.xsession-errors if it could help:
^[]0;localhost:/home/emilio^Gcat: /proc/1050/comm: No such file or directory
startkde: Starting up...
klauncher(1033) kdemain: No DBUS session-bus found. Check if you have started the DBUS server$
kdeinit4: Communication error with launcher. Exiting!
This is cat /var/log/Xorg.0.log
[ 82.667]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 82.667] X Protocol Version 11, Revision 0
[ 82.667] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 82.667] Current Operating System: Linux work_group 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 82.667] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda5 rw init=/usr/lib/systemd/systemd fastboot acpi_enforce_resources=lax initrd=../initramfs-linux.img
[ 82.667] Build Date: 14 April 2014 08:39:09AM
[ 82.667]
[ 82.667] Current version of pixman: 0.32.4
[ 82.667] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 82.667] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 82.668] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 27 11:45:41 2014
[ 82.668] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 82.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 82.668] (==) No Layout section. Using the first Screen section.
[ 82.668] (==) No screen section available. Using defaults.
[ 82.668] (**) |-->Screen "Default Screen Section" (0)
[ 82.668] (**) | |-->Monitor "<default monitor>"
[ 82.668] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 82.668] (==) Automatically adding devices
[ 82.668] (==) Automatically enabling devices
[ 82.668] (==) Automatically adding GPU devices
[ 82.668] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 82.668] Entry deleted from font path.
[ 82.668] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 82.668] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 82.668] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 82.668] (II) Loader magic: 0x804c80
[ 82.668] (II) Module ABI versions:
[ 82.668] X.Org ANSI C Emulation: 0.4
[ 82.668] X.Org Video Driver: 15.0
[ 82.668] X.Org XInput driver : 20.0
[ 82.668] X.Org Server Extension : 8.0
[ 82.669] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 82.671] (--) PCI:*(0:1:0:0) 1002:7142:1002:3000 rev 0, Mem @ 0xe0000000/268435456, 0xfeae0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 82.671] (--) PCI: (0:1:0:1) 1002:7162:1002:3001 rev 0, Mem @ 0xfeaf0000/65536
[ 82.671] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 82.671] Initializing built-in extension Generic Event Extension
[ 82.671] Initializing built-in extension SHAPE
[ 82.671] Initializing built-in extension MIT-SHM
[ 82.671] Initializing built-in extension XInputExtension
[ 82.671] Initializing built-in extension XTEST
[ 82.671] Initializing built-in extension BIG-REQUESTS
[ 82.671] Initializing built-in extension SYNC
[ 82.671] Initializing built-in extension XKEYBOARD
[ 82.671] Initializing built-in extension XC-MISC
[ 82.671] Initializing built-in extension SECURITY
[ 82.671] Initializing built-in extension XINERAMA
[ 82.671] Initializing built-in extension XFIXES
[ 82.671] Initializing built-in extension RENDER
[ 82.671] Initializing built-in extension RANDR
[ 82.671] Initializing built-in extension COMPOSITE
[ 82.671] Initializing built-in extension DAMAGE
[ 82.671] Initializing built-in extension MIT-SCREEN-SAVER
[ 82.671] Initializing built-in extension DOUBLE-BUFFER
[ 82.671] Initializing built-in extension RECORD
[ 82.671] Initializing built-in extension DPMS
[ 82.671] Initializing built-in extension Present
[ 82.671] Initializing built-in extension DRI3
[ 82.671] Initializing built-in extension X-Resource
[ 82.671] Initializing built-in extension XVideo
[ 82.671] Initializing built-in extension XVideo-MotionCompensation
[ 82.671] Initializing built-in extension XFree86-VidModeExtension
[ 82.671] Initializing built-in extension XFree86-DGA
[ 82.671] Initializing built-in extension XFree86-DRI
[ 82.671] Initializing built-in extension DRI2
[ 82.671] (II) "glx" will be loaded by default.
[ 82.671] (II) LoadModule: "dri2"
[ 82.671] (II) Module "dri2" already built-in
[ 82.671] (II) LoadModule: "glamoregl"
[ 82.671] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 82.674] (II) Module glamoregl: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.0, module version = 0.6.0
[ 82.674] ABI class: X.Org ANSI C Emulation, version 0.4
[ 82.674] (II) LoadModule: "glx"
[ 82.674] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 82.674] (II) Module glx: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.1, module version = 1.0.0
[ 82.674] ABI class: X.Org Server Extension, version 8.0
[ 82.674] (==) AIGLX enabled
[ 82.674] Loading extension GLX
[ 82.674] (==) Matched ati as autoconfigured driver 0
[ 82.674] (==) Matched ati as autoconfigured driver 1
[ 82.674] (==) Matched modesetting as autoconfigured driver 2
[ 82.674] (==) Matched fbdev as autoconfigured driver 3
[ 82.674] (==) Matched vesa as autoconfigured driver 4
[ 82.674] (==) Assigned the driver to the xf86ConfigLayout
[ 82.674] (II) LoadModule: "ati"
[ 82.674] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 82.674] (II) Module ati: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.0, module version = 7.3.0
[ 82.674] Module class: X.Org Video Driver
[ 82.674] ABI class: X.Org Video Driver, version 15.0
[ 82.674] (II) LoadModule: "radeon"
[ 82.674] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 82.675] (II) Module radeon: vendor="X.Org Foundation"
[ 82.675] compiled for 1.15.0, module version = 7.3.0
[ 82.675] Module class: X.Org Video Driver
[ 82.675] ABI class: X.Org Video Driver, version 15.0
[ 82.675] (II) LoadModule: "modesetting"
[ 82.675] (WW) Warning, couldn't open module modesetting
[ 82.675] (II) UnloadModule: "modesetting"
[ 82.675] (II) Unloading modesetting
[ 82.675] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 82.675] (II) LoadModule: "fbdev"
[ 82.675] (WW) Warning, couldn't open module fbdev
[ 82.675] (II) UnloadModule: "fbdev"
[ 82.675] (II) Unloading fbdev
[ 82.675] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 82.675] (II) LoadModule: "vesa"
[ 82.675] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 82.675] (II) Module vesa: vendor="X.Org Foundation"
[ 82.675] compiled for 1.15.0, module version = 2.3.2
[ 82.675] Module class: X.Org Video Driver
[ 82.675] ABI class: X.Org Video Driver, version 15.0
[ 82.675] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 82.683] (II) VESA: driver for VESA chipsets: vesa
[ 82.683] (++) using VT number 7
[ 82.686] (II) [KMS] Kernel modesetting enabled.
[ 82.686] (WW) Falling back to old probe method for vesa
[ 82.686] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 82.686] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 82.686] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 82.686] (==) RADEON(0): Default visual is TrueColor
[ 82.686] (==) RADEON(0): RGB weight 888
[ 82.686] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 82.686] (--) RADEON(0): Chipset: "ATI Radeon X1300/X1550" (ChipID = 0x7142)
[ 82.687] (II) Loading sub module "dri2"
[ 82.687] (II) LoadModule: "dri2"
[ 82.687] (II) Module "dri2" already built-in
[ 82.687] (II) Loading sub module "exa"
[ 82.687] (II) LoadModule: "exa"
[ 82.687] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 82.687] (II) Module exa: vendor="X.Org Foundation"
[ 82.687] compiled for 1.15.1, module version = 2.6.0
[ 82.687] ABI class: X.Org Video Driver, version 15.0
[ 82.687] (II) RADEON(0): KMS Color Tiling: enabled
[ 82.687] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 82.687] (II) RADEON(0): KMS Pageflipping: enabled
[ 82.687] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 82.717] (II) RADEON(0): Output DVI-0 has no monitor section
[ 82.783] (II) RADEON(0): Output S-video has no monitor section
[ 82.850] (II) RADEON(0): Output DVI-1 has no monitor section
[ 82.880] (II) RADEON(0): EDID for output DVI-0
[ 82.880] (II) RADEON(0): Manufacturer: HWP Model: 2840 Serial#: 16843009
[ 82.880] (II) RADEON(0): Year: 2009 Week: 27
[ 82.880] (II) RADEON(0): EDID Version: 1.3
[ 82.880] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 82.880] (II) RADEON(0): Sync: Separate
[ 82.880] (II) RADEON(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 82.880] (II) RADEON(0): Gamma: 2.20
[ 82.880] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 82.880] (II) RADEON(0): Default color space is primary color space
[ 82.880] (II) RADEON(0): First detailed timing is preferred mode
[ 82.880] (II) RADEON(0): redX: 0.646 redY: 0.334 greenX: 0.284 greenY: 0.602
[ 82.880] (II) RADEON(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 82.880] (II) RADEON(0): Supported established timings:
[ 82.880] (II) RADEON(0): 720x400@70Hz
[ 82.880] (II) RADEON(0): 640x480@60Hz
[ 82.880] (II) RADEON(0): 800x600@60Hz
[ 82.880] (II) RADEON(0): 1024x768@60Hz
[ 82.880] (II) RADEON(0): Manufacturer's mask: 0
[ 82.880] (II) RADEON(0): Supported standard timings:
[ 82.880] (II) RADEON(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 82.880] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 82.880] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 82.880] (II) RADEON(0): Supported detailed timing:
[ 82.880] (II) RADEON(0): clock: 85.5 MHz Image Size: 413 x 234 mm
[ 82.880] (II) RADEON(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 82.880] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 82.880] (II) RADEON(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 145 MHz
[ 82.880] (II) RADEON(0): Monitor name: HP LE1851w
[ 82.880] (II) RADEON(0): Serial No: CNC927PFP1
[ 82.880] (II) RADEON(0): EDID (in hex):
[ 82.880] (II) RADEON(0): 00ffffffffffff0022f0402801010101
[ 82.880] (II) RADEON(0): 1b13010368291778ee6c25a555489a27
[ 82.880] (II) RADEON(0): 135054a1080081c08140818001010101
[ 82.880] (II) RADEON(0): 010101010101662156aa51001e30468f
[ 82.880] (II) RADEON(0): 33009dea1000001e000000fd00304c18
[ 82.880] (II) RADEON(0): 530e000a202020202020000000fc0048
[ 82.880] (II) RADEON(0): 50204c4531383531770a2020000000ff
[ 82.880] (II) RADEON(0): 00434e43393237504650310a202000fd
[ 82.880] (II) RADEON(0): Printing probed modes for output DVI-0
[ 82.880] (II) RADEON(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 82.881] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 82.881] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 82.881] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 82.881] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 82.881] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 82.881] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 82.881] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 82.946] (II) RADEON(0): EDID for output S-video
[ 83.013] (II) RADEON(0): EDID for output DVI-1
[ 83.013] (II) RADEON(0): Output DVI-0 connected
[ 83.013] (II) RADEON(0): Output S-video disconnected
[ 83.013] (II) RADEON(0): Output DVI-1 disconnected
[ 83.013] (II) RADEON(0): Using exact sizes for initial modes
[ 83.013] (II) RADEON(0): Output DVI-0 using initial mode 1366x768
[ 83.013] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 83.013] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fba0000
[ 83.013] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 83.013] (==) RADEON(0): DPI set to (96, 96)
[ 83.013] (II) Loading sub module "fb"
[ 83.013] (II) LoadModule: "fb"
[ 83.013] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 83.014] (II) Module fb: vendor="X.Org Foundation"
[ 83.014] compiled for 1.15.1, module version = 1.0.0
[ 83.014] ABI class: X.Org ANSI C Emulation, version 0.4
[ 83.014] (II) Loading sub module "ramdac"
[ 83.014] (II) LoadModule: "ramdac"
[ 83.014] (II) Module "ramdac" already built-in
[ 83.014] (II) UnloadModule: "vesa"
[ 83.014] (II) Unloading vesa
[ 83.014] (--) Depth 24 pixmap format is 32 bpp
[ 83.014] (II) RADEON(0): [DRI2] Setup complete
[ 83.014] (II) RADEON(0): [DRI2] DRI driver: r300
[ 83.014] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 83.014] (II) RADEON(0): Front buffer size: 4224K
[ 83.014] (II) RADEON(0): VRAM usage limit set to 463996K
[ 83.014] (==) RADEON(0): Backing store enabled
[ 83.014] (II) RADEON(0): Direct rendering enabled
[ 83.014] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 83.014] (II) EXA(0): Driver allocated offscreen pixmaps
[ 83.014] (II) EXA(0): Driver registered support for the following operations:
[ 83.014] (II) Solid
[ 83.014] (II) Copy
[ 83.014] (II) Composite (RENDER acceleration)
[ 83.014] (II) UploadToScreen
[ 83.014] (II) DownloadFromScreen
[ 83.014] (II) RADEON(0): Acceleration enabled
[ 83.014] (==) RADEON(0): DPMS enabled
[ 83.014] (==) RADEON(0): Silken mouse enabled
[ 83.015] (II) RADEON(0): Set up textured video
[ 83.015] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 83.015] (II) RADEON(0): [XvMC] Extension initialized.
[ 83.015] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 83.015] (--) RandR disabled
[ 83.040] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 83.040] (II) AIGLX: enabled GLX_ARB_create_context
[ 83.040] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 83.040] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 83.040] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 83.040] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 83.040] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 83.040] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 83.040] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 83.040] (II) AIGLX: Loaded and initialized r300
[ 83.040] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 83.041] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 83.146] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 83.146] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.146] (II) LoadModule: "evdev"
[ 83.146] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 83.146] (II) Module evdev: vendor="X.Org Foundation"
[ 83.146] compiled for 1.15.0, module version = 2.8.2
[ 83.146] Module class: X.Org XInput Driver
[ 83.146] ABI class: X.Org XInput driver, version 20.0
[ 83.146] (II) Using input driver 'evdev' for 'Power Button'
[ 83.146] (**) Power Button: always reports core events
[ 83.146] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 83.146] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 83.146] (--) evdev: Power Button: Found keys
[ 83.146] (II) evdev: Power Button: Configuring as keyboard
[ 83.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 83.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 83.146] (**) Option "xkb_rules" "evdev"
[ 83.146] (**) Option "xkb_model" "pc104"
[ 83.146] (**) Option "xkb_layout" "us"
[ 83.191] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 83.191] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.191] (II) Using input driver 'evdev' for 'Power Button'
[ 83.191] (**) Power Button: always reports core events
[ 83.191] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 83.191] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 83.191] (--) evdev: Power Button: Found keys
[ 83.191] (II) evdev: Power Button: Configuring as keyboard
[ 83.191] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 83.191] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 83.191] (**) Option "xkb_rules" "evdev"
[ 83.191] (**) Option "xkb_model" "pc104"
[ 83.191] (**) Option "xkb_layout" "us"
[ 83.191] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 83.192] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event3)
[ 83.192] (II) No input driver specified, ignoring this device.
[ 83.192] (II) This device may have been added with another device file.
[ 83.192] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.193] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.193] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.194] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event4)
[ 83.194] (II) No input driver specified, ignoring this device.
[ 83.194] (II) This device may have been added with another device file.
[ 83.194] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 83.194] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.194] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.194] (**) Logitech USB Receiver: always reports core events
[ 83.194] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 83.194] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 83.194] (--) evdev: Logitech USB Receiver: Found keys
[ 83.194] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 83.194] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52E.0001/input/input11/event8"
[ 83.194] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 83.194] (**) Option "xkb_rules" "evdev"
[ 83.194] (**) Option "xkb_model" "pc104"
[ 83.194] (**) Option "xkb_layout" "us"
[ 83.195] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 83.195] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 83.195] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.195] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.195] (**) Logitech USB Receiver: always reports core events
[ 83.195] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[ 83.195] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 83.195] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 83.195] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 83.195] (--) evdev: Logitech USB Receiver: Found relative axes
[ 83.195] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 83.195] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 83.195] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 83.195] (--) evdev: Logitech USB Receiver: Found keys
[ 83.195] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 83.195] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 83.195] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 83.195] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 83.195] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 83.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52E.0002/input/input12/event9"
[ 83.195] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 83.196] (**) Option "xkb_rules" "evdev"
[ 83.196] (**) Option "xkb_model" "pc104"
[ 83.196] (**) Option "xkb_layout" "us"
[ 83.196] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 83.196] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 83.196] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 83.197] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 83.197] (II) No input driver specified, ignoring this device.
[ 83.197] (II) This device may have been added with another device file.
[ 83.197] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 83.197] (II) No input driver specified, ignoring this device.
[ 83.197] (II) This device may have been added with another device file.
[ 84.996] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 296.326] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 296.367] (II) RADEON(0): EDID vendor "HWP", prod id 10304
[ 296.367] (II) RADEON(0): Using EDID range info for horizontal sync
[ 296.367] (II) RADEON(0): Using EDID range info for vertical refresh
[ 296.367] (II) RADEON(0): Printing DDC gathered Modelines:
[ 296.368] (II) RADEON(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 296.368] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 296.368] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 296.368] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 296.500] setversion 1.4 failed: Permission denied
[ 297.940] (II) AIGLX: Suspending AIGLX clients for VT switch
Any other helpfull log of something please ask for it
MORE INFO: Some apps, when starting cannot have a correct configuration (loading profiles for example) because they say there's a problem with permissions but don't know which of the files could have the wrong permissions
Last edited by eherranzr (2014-04-27 10:09:34)
Maybe you are looking for
-
Hoiw do I force my new mf8580cdw to print in black and white only (grey scale)?
First of all I am using windows 7 - 64bit and my printer is the MF8580CDW. I am using the UFRII print driver. I have tried changing one/all of the profiles in the print settings and printer properties to "black and white" printing but the software ke
-
Tutorial for creating a J2EE project with "Flex Builder 3 Beta 3 " ?
Hi, I'm trying to set up a Flex environment with: Flex Builder 3 Beta 3 stand alone WTP (from eclipse update manager) LCDS 2.5 (with JRun) JBoss 4.2.2GA At this moment I successful installed everything (but not set up). I added WTP at Flex Builder3 (
-
What is iMovie error code -49? I get when I try to share my edited video in 720p with i tunes.
I edited a homevideo on my new mac Book pro 15-inch. When I tried to share in 720p with iTunes I get a message that says it can't prepare it and gives error code -49. Does anyone know what that means? I have abour 90 GB disc space, so that can't be t
-
VC : Update Equipment with new configuration number
Hi, I am trying to update an existing equipment with a new configuration number (cuobj). I used try to use 'BAPI_EQUI_CHANGE' to achieve this but apparently they didn't work even though i've received no exceptions. (no luck either with EQUIPMENT_MODI
-
Custom cookie cutter shape install in PSE 11?
I need some help. I've spent 2 hours online and I can't find an answer. I need a cookie cutter of a full bow tie. Not the outline one like the one tha's pre-installed in PSE shapes/cookie cutter. 1. How/where do I look for more cookie cutter shapes?