Canon MP560 Scanner Twain Driver Not Working

I have a Canon MP560 MFP and for some reason the Scanner does not show up in applications like Image Capture or Preview. However, it works fine with Canon's MP Navigator 3.0. I downloaded and installed the latest Canon driver software for that Printer for 10.6 but that didn't seem to make any difference. I have tried turning off the printer and turning it back on. I use it wirelessly only and before the latest Canon printer update it all worked fine. Now it can print fine wirelessly and it can scan wirelessly only if I use Canon's MP Navigator, which I do not prefer to use for simple scanning tasks.
In Library/CFM Support I have a BJExtDDI.cfm and a TWAIN Source Manager.Shlb file.
What is missing here? This used to work fine.

The scanning via Image Capture or Preview uses the ICA driver. This is included with the [Canon driver update|http://support.apple.com/kb/DL899] available from Apple. The Canon scanner driver supports the scanning via MP Navigator but not Image Capture or Preview and the ICA driver does not support this application.
So it sounds like you have a problem with the ICA driver. This driver package is located in HD > Library > Image Capture > Devices > CanonIJScanner1. You could try installing the [ICA v1.7.0 driver|http://support-au.canon.com.au/contents/AU/EN/0100213301.html] which will update this package.
If that doesn't help then can you confirm if you can see the scanner if you select to add it to Print & Fax. If you select to Add the wireless MP560 should be seen twice in the Default view - first as a Bonjour Scanner and then a bit later as canonijnetwork.
FYI - Another postee found that he was not able to locate the scanner component via wireless, while the printer component was still working fine via wireless.

Similar Messages

  • URGENT: Canon MF4350d (UFRII LT) driver not working on 10.6.4?

    Hi,
    Up till recently, i've had no problems printing on my Canon MF4350d using my macbook pro.
    Just yesterday, I started to get 10322 errors, meaning to say that my printer is not supported by Mac. Ive tried downloading the latest drivers from the Canon website (UK, US, AU) and yet it still doesnt work. I have read a couple of forum suggestions of clearing the printer files in the library, rebooting and such but had no luck with that either.
    Some have said that there are no drivers currently for the 4350d in relation to the 10.6.4 update.
    Is there a generic driver i can use? hopefully one that can do double side printing as well?
    Help urgently needed!
    Cheers,
    Paul

    paulthl wrote:
    Just yesterday, I started to get 10322 errors, meaning to say that my printer is not supported by Mac. Ive tried downloading the latest drivers from the Canon website (UK, US, AU) and yet it still doesnt work. I have read a couple of forum suggestions of clearing the printer files in the library, rebooting and such but had no luck with that either.
    With all the drivers you have installed you have most likely caused a version mismatch. You only need one driver - the v2.10 available from the Canon Oz web site via this [link|http://support-au.canon.com.au/contents/AU/EN/0100212606.html].
    It sounds like you may already have this version downloaded. So I suggest you try the removal of the files again following this procedure which comes from the UFRII User Guide.
    1. Open Print & Fax and delete any print queues that would be using the UFRII driver.
    2. Open Finder and navigate to HD > Library > Printers > Canon > and delete the UFR2 folder.
    3. Navigate to HD > Library > Launch Agents > and delete the file 'jp.co.canon.UFR2.BG.plist'
    4. Navigate to HD > Library > Printers > PPDs > Contents > Resources > en.lproj > and delete the files named CNTD**Z*2.ppd.gz (where * indicates a character string that represents the printer model and 2 indicates a character string that represents the corresponding language).
    5. With all of these files moved to the Trash, empty it and restart your Mac.
    Some have said that there are no drivers currently for the 4350d in relation to the 10.6.4 update.
    That's a load of BS. Those that have said this obviously have no idea what they are talking about...The current v2.10 and the new v2.15 driver work fine on 10.6.4.
    Is there a generic driver i can use? hopefully one that can do double side printing as well?
    No. This model only supports Canon's proprietary UFRII printer language.

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Amber update but map and bere drive not work

    After amber update my here map and here drive not work just open the app but not open and close automatically

    Same thing here. I have tried all things and have a similar issue
    http://discussions.nokia.com/t5/HERE-Location-base​d-services/Settings-gt-Applications-does-not-have-​...
    NOKIA NEED HELP HERE !!

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Disk Drive not working and could not inter Hkey_Local_Machine

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Icloud drive not working on ipad 3

    iCloud drive not working on iPad 3. works fine on my MacBook Pro and iPhone 6. Utterly useless on iPad 3.

    Hi there Chris Howlett,
    Depending on the issues you are experiencing, you may find the articles below helpful. 
    Get help using iCloud Drive
    iCloud Drive FAQ
    -Griff W. 

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Epson Workforce 325 scanner app will not work.

    Recently downloaded Maverick X and now my Epson Workforce 325 scanner app will not work. I have checked for updates through Epson and they say its an Apple problem, but there is none available through Apple. 
    Do I have to go back to the old Mountain Lion 10.8.5 v software?

    You will have no alternative but to wait for Epson to update their drivers to be compatible w/Mavarick.  Why not call them (tech support) or send them an email? 

  • Epson 1260 scanner driver not working

    Updated to OS 10, I no longer have Classic. The scanner worked with Classic, not with new OS, tried downloading and installing new driver from Epson site, when I double click scanner icon, it bounces in dock then stops, the program doesn't open? Any ideas? Thanks.
    Greg

    When you go to System Preferences > Print & Fax, click on the printer then check what it says for "Kind" if it mentions anything to do with Guten Print then you have the wrong driver installed. Remove the printer from the list, install the driver from the following page:
    http://esupport.epson-europe.com/FileDetails.aspx?lng=en-GB&data=FGQ8MBMpKluuNQq HIN7jNpif1fTpfvWP2jui+Hg0obkU003D&id=318867
    Restart the Mac, go back to Print & Fax, if the printer hasn't already added click the + button and click on your printers name once, underneath the name it should say Print Using, check this has your printers name in it and then click Add. If this does not work then try a full uninstall process, go to Mac HDD/ Library/Printers and drag the Epson folder to the trash can, repair your disk permissions and then install the driver again from the above link and restart the Mac, go back to Print & Fax, if the printer hasn't already added click the + button and click on your printers name once, underneath the name in Print Using, check this has your printers name in it and click Add. This should resolve any issues you have with missing print settings.

  • Mavericks / Canon Canoscan 8800F:  Hardware Buttons not working.

    I've just upgraded to Mavericks.  I've also updated the driver (to 13.9.2a) and installed the latest MP Navigator 1.0 (1.0.7).  Is there something else I need to do?
    I'm having two problems since the upgrade:
    - The hardware buttons on the scanner cover have stopped working
    - I'm unable to add the scanner in the System Preferences: Printers and Scanners dialog, because it's not listed as one of the available devices.
    However:
    - MP Navigator as well as TWAIN - compatible applications (e.g. Adobe Acrobat Pro) are working properly: they are able to see and use the 8800F (even though it's not listed as an available scanner in System Preferences)
    Further explanation: The row of hardware buttons on the scanner's cover have stopped working since the upgrade to Mavericks. For example
    - The "Copy" button is supposed to launch MP Navigator, scan the document on the glass and print the document.
    - "Email" is supposed to scan the document, open a new message in "Mail" and insert the document as an attachment
    - There are also several "PDF" buttons that are supposed to scan to a PDF document and do various things with it..
    These buttons worked in previous MacOS versions, but none of them do anything since I've installed Mavericks.
    Also, in the System Preferences: Printers and Scanners window: I thought I'd try deleting and re-adding the 8800F there to see if that might clear up the buttons problem. I deleted it, but am unable to add it back because it is not listed as one of the available devices.  So then I checked the "System Report" under "About this Mac," and found that Canoscan is listed there as one of the USB devices.

    Responding to my own post: I've learned that the problem is in the ICA driver for this device, and we're waiting for an update to that to resolve this problem.
    For details, please see https://discussions.apple.com/message/23758000#23758000

  • Canon IJ Network Scanning Utility not working

    Hello,
    Since I upgraded my OS to Yosemite, the application "Canon IJ Network Scan Utility.app" is not working anymore.
    When I try to launch it, it first shows in the top menu bar and then disappears. It is located in Macintosh HD ▸ Library ▸ Printers ▸ Canon ▸ BJPrinter ▸ Utilities.
    I cannot use my scanner from the scanner itself any more which is not so convenient when you have a stack of document to scan...
    B.
    Tech. details:
    Yosemite version 10.10.1
    iMac (24-inch Mid 2007)
    Processor: 2.8 GHz Intel Core 2 Duo
    Memory: 4 GB 667 MHz DDR2 SDRAM
    Graphics: ATI Radeon HD 2600 Pro 256 MB

    I have noticed the same issue you are talking about. I have found a workaround to trigger scans from the printer, but it is MUCH less convenient than it was in Mavericks.
    If you install all the latest Yosemite versions of Canon drivers and utilities from canon support site, you should have something called "Canon IJ Network Scanner Selector EX". If you run this, your printer should show as one of the options to select. Select it. There should also be a button labeled: "Scan-from-operation-panel-settings". Click that, and select your printer. If it is already selected, you may have to unselect and then re-select. At the printer, you should then see your mac in the "PC" destination selector.
    With Mavericks, I only had to set this up once, and I could then ALWAYS just go right to the printer to initiate scans. That is, it STAYED connected to my computer: as long as the computer was on, I could just go straight to the printer to start scanning. Now, it seems that the connection somehow gets broken, or the "listener program" on the Mac stops, or something, and you have to go through the above steps again to get it re-connected. It is quite annoying, and much less convenient than it was with Mavericks. I think in my case, it gets "disconnected" every time my computer goes to sleep.
    Hope that helps. If you find a way to keep it connected all the time, I'd appreciate it!

Maybe you are looking for