Canon MP600 Scanner not recognised

OSX 10.8.4 does not recognize my scanner in the Canon MP600 anymore plase advise why this is and how to correct it

Look in the HD/Library/Applications Support/Canon folder.  That's where the driver for my Canon printer is located. If you install it for only the current user and not all users it might be in the Users/Home/LIbrary/Application Support/Canon folder.
For other files for the printer look in the HD/Library/Printers folder.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

Similar Messages

  • Canon MP600 scanner not working - help!!

    I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
    Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
    I've updated and installed all the drivers from Canon's website. I cannot figure out what is causing the problem, or how to rectify it?
    Please offer any help you can. Thanks!

    Hi all,
    I had the same issue with a Canon MP600. Printing
    did work, but it refused to scan with scanner not connected
    message.
    I updated all the drivers, no luck.
    As a last resort, I changed the USB cable to a certified
    USB 2.0 high speed one and it started scanning
    I would suggest to try the following procedures:
    - find a USB high speed cable
    - connect just the mac and the printer
    - test
    If it it works it might be the old cable or some
    interference with another USB device.
    Reconnecting one at a time the other devices will
    be the final step .
    If it does not work also after having updated the
    drivers and standalone with a Hi-speed USB cable
    I have no additional clues, sorry.
    Hope it helps

  • Scanner not recognised in Photoshop CS3

    My Canon 9950F scanner is recognised in Photoshop CS2 but not in Photoshop CS3. I've deleted the driver and reinstalled but still the same issue. Any ideas?

    Scanner drivers are usually very sensitive to different versions of applications and the system itself. First thing to do is to go to the scanenr providers website and look for newer drivers and download and isntall the latest ones and not use the old ones that once upon a time came with the scanner. Installation of scanner drivers are often tricky and you have to follow the instructions provided to the letter. We ahd an issue at work with an Epson scanner driver and Photohsop CS2. Installation and features worked just fine on on G5 - but not on another with identical system. Go figure. In the end we cloned the entire machine with the working installation (user is on homeserver on network which doesn't interfere with content on the machine itself) to the other one and then it worked there as well.
    Or get VueScan from http://www.hamrick.com/ - supports most scanners in many versions.
    Edit: I doubt that scanner providers already have scanner drivers for Photoshop CS3.

  • Canon MP510 scanner not available under 10.9, who can help?

    Canon MP510 scanner not available under 10.9 since update, who can help?
    Canon informed me that Apple does not support this device any more, apple informed to contact the manufacturer.....
    Any ideas how to activate scan function again?
    Printing is okay under 10.9 and under 10.8 scan+print was okay.

    Canon has a scanner driver and the MP Navigator scanning application for the MP510 for OS X 10.8 so you could try installing them on your 10.9 Mac. I am not sure if either file is digitally signed, so Gatekeeper will block the installation. To install them, you can Control-click on the respective installer and select Open from the pop-up menu. You will then be given the option to install.
    And for the record, Canon makes the drivers - not Apple, so it is Canon that is not supporting the MP510 on OS X 10.9.

  • Canon scanner not recognised after Mac wakes up.

    Hi
    I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
    But since upgrading to Leopard a few months ago I've been having trouble with it.
    What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
    I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
    Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
    I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
    I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
    Any way to get this to stop happening?

    Bump
    Joey Goldstein wrote:
    Hi
    I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
    But since upgrading to Leopard a few months ago I've been having trouble with it.
    What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
    I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
    Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
    I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
    I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
    Any way to get this to stop happening?
    Message was edited by: Joey Goldstein

  • Mountain Lion Image Capture won't recognize my Canon MP600 Scanner

    I'm not sure when it happened as I don't use my scanner all that much but at some point in the last month or so Image Capture can'is no longer able to see my scanner. It's a multi function Canon MP600 printer/scanner. I can still print but no go on scanning. I checked out the Canon site for drivers/updates but there are none. System Report sees the MP600 and like I said, I can print just not scan. I'm running 10.8.2.
    Any ideas or help is greatly appreciated.
    Joe

    This might have been my fix, too. I did as this instructed; however, after installing v.2.11 from Apple's site and deleting the printer, then adding it back again (I also unplugged and replugged the printer), nothing changed.
    I then did as "noseyp" below suggested and at the Canon site added the scanner driver for Mac OS 10.7. That process (after I bypassed my security roadblock), required a computer restart.
    So was is it v.2.11 installation (plus the restart) that made the difference? Or was it the 10.7 scanner driver? I won't know.
    I'd suggest to anyone to do as "legendarybc" suggested, but then do restart your computer. If that doesn't work, then add the 10.7 scanner driver from:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp600#Overview

  • Does Mac support Canon MP600 scanner

    my Mac support the printer portion but I cant get the scanner to work.  Does anyone know
    if Canon MP600 is supported for the scanner portion of the machine?

    Hi, to everybody who has a problem with the scanner MP600 on Mavericks. Found a way how it works:
    Uninstall and Reinstall the software according to the instruction that Candacefae gave us. Instead pick software and driver for Lion including MP Navigator. Then Restart Computer. After done click on Application folder and Canon Utilities. Then click on MP Navigator. And voila. You can scan.
    A little annoyance but it works. Keep in mind - clicking on System Preferences and Open Scanner will not work!
    For everybody else who does not want to deal with all the steps there is always Vuscan - just cost $79.95 for the Premiumversion. Works with all Models no matter how old.

  • Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working

    Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
    The scanner works great in the Canon scanner software and other devices but not Acrobat.
    When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
    I had a HP scanner before and all options where there and worked great.
    Anyone know of any fixes for this?
    Cheers

    The scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
    There is the WIA Canoscan  and a Canoscan 9000f listed and when you select either of these you get these messages.
    also here is the twacker result with 2 entries

  • Canon cr2 files not recognised in LR4.1

    I have Lightroom 4.1 running on a MacBook Air with 10.8.1 OS
    It is not recognising the files from my Canon 7D with v 2.00 firmware
    The files are recognised however in Bridge v 6
    Any solutions?

    What is your general work flow? Are you pulling the files directly from the camera? I was having an issue with my new 7D last night where Lightroom insists that it doesn't know what to do with the cr2 files when I was attempting to import them from the camera (Something it happily does with my T3 and has for ages)
    However, if I manually dragged the RAW files to their holding directory on the drive myself, and then imported them to Lightroom, everything was just fine.

  • [SOLVED] scanner not recognised

    peter@mesh:~$ sane-find-scanner
    # sane-find-scanner will now attempt to detect your scanner. If the
    # result is different from what you expected, first make sure your
    # scanner is powered up and properly connected to your computer.
    # No SCSI scanners found. If you expected something different, make sure that
    # you have loaded a kernel SCSI driver for your SCSI adapter.
    found USB scanner (vendor=0x04b8 [EPSON], product=0x010b [Perfection1240]) at libusb:005:003
    # Your USB scanner was (probably) detected. It may or may not be supported by
    # SANE. Try scanimage -L and read the backend's manpage.
    # Not checking for parallel port scanners.
    # Most Scanners connected to the parallel port or other proprietary ports
    # can't be detected by this program.
    # You may want to run this program as root to find all devices. Once you
    # found the scanner devices, be sure to adjust access permissions as
    # necessary.
    peter@mesh:~$ scanimage -L
    device `v4l:/dev/video0' is a Noname BT878 video (Hauppauge (bt878)) virtual device
    peter@mesh:~$ lsusb
    Bus 005 Device 003: ID 04b8:010b Seiko Epson Corp. Perfection 1240
    Bus 005 Device 002: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
    Bus 005 Device 001: ID 0000:0000
    Bus 004 Device 001: ID 0000:0000
    Bus 003 Device 001: ID 0000:0000
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 001: ID 0000:0000
    Scanner is recognised by sane-find-scanner but not by scanimage -L. I am in the scanner group.
    It was working under other distros and strangely it works on w2k in virtualbox.
    Maybe a permissions issue? Any ideas?
    Last edited by ploub (2008-02-24 12:47:53)

    Permissions are correct:
    /peter@mesh:~$ ls -lR /dev/bus/usb
    dev/bus/usb/005:
    total 0
    crw-rw-r-- 1 root root 189, 512 2008-02-24 08:15 001
    crw-rw-r-- 1 root root 189, 513 2008-02-24 08:15 002
    crw-rw-r-- 1 root scanner 189, 514 2008-02-24 10:01 003
    Changing permissions in /proc doesn't help either:
    peter@mesh:~$ chmod a+rw /proc/bus/usb/005/003
    sudo scanimage -L still only picks up the tv card. Any other ideas? Thanks!

  • Scanner not recognising computer

    I have an hp5520 all in one printer and an hppavilion250 laptop. I have been scanning photos regularly over the last month using paint programme. Last night I couldn't get the scanner to recognise the computer - the printer says 'computer not found. The printer facility is working fine. Can you help.

    Dear BillyA52,
    Please follow the steps of this document:
    http://support.hp.com/us-en/product/hp-photosmart-5520-e-all-in-one-printer-series/5157533/document/...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Canon Mp600 will not work when I try to use photoshop print settings since I upgraded to latest Maverick?

    I upgraded to latest Maverick . Now when I use PhotoshopC5 my print settings crash every time I even touch the button. My printer is a Canon MP600 and worked with all Photoshop settings until this week. Help!

    The last driver that Canon released for the MP600, v10.5.1.2.0, was for Mac OS X 10.7. Since you mention upgrading to Mavericks you could have a driver version earlier than this. You can check by opening Printers & Scanners, selecting the MP600 and then clicking on Options & Supplies. With the General tab selected you will see the driver version.
    Now even if you do have the latest version there is no guarantee that it will be compatible with all applications on 10.9, especially the CS5 suite. You could try installing Gutenprint v5.2.9 to get a driver more compatible with the latest OS. Or if colour management is a requirement for Photoshop printing then you may need to purchase Printfab, although since you are using an MP600 then I would assume that you are not overly concerned with colour accuracy. Another option is to export the image from Photoshop as a PDF and then open this in Preview and print from that application.

  • After upgrade to Maverick, no pilot for canon MP600 scanner, i need to install back the old OSX, how can I do?

    I  need to ungrade from Maverick to my old OSX?
    I don't know how to start.
    The problem is that Canon MP600 is old and have no interface for scan, even command from the printer function keyboard.

    Erase your hard drive then install the OS X version your prefer. If you have a backup of the old system, then erase the drive and restore the backup.
    Since you haven't provided any useful information about your hardware or what system you want to install, this is as far as i csn go.

  • 2545 driver pmhpcl1.inf missing, Windows 8, scanner not recognised (one computer)

    I have a WiFi "Ink Advantage 2545" and 2 * 64-bit Windows 8.1 PCs.  Printer works both.  However, scanner not visible on 1 only.  Checked device properties, events on both... functional computer has 2 drivers installed pmhpcl1.inf and hpvyt11.inf, non-functional computer has 1 driver installed hpvyt11.inf...  
    I cannot find any reference to the missing driver.  I have tried ninstalling, restarting, re-installing, etc several times without success.

    Hello @ANU_alan,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the scan issue that you're experiencing when attempting to scan with your HP Deskjet Ink Advantage 2545 All-in-One Printer to one of your Windows 8.1 computers. Thank you for mentioning in your post that you did notice a difference with the .inf files that are installed on both the working computer and the non-functioning computer. 
    At this point I would like you to start troubleshooting by clicking here to download and run the HP Print and Scan Doctor Tool. This Tool will run on the problematic computer and 'fix scanning' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
    Please take note of any error messages or failures that the HP Print and Scan Doctor may find.
    Please respond to this post with the result of running the HP Print and Scan Doctor Tool. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Cannon MP600 scanner not working with Mavericks.

    Get this error message MPP navigator 304.pkg can’t be opened because it is from an unidentified developers.
    No updated drivers at Cannon website. Printers side working fine.  Had to open MP Navigator from Apps (right Faff to get scanner to work) Can not just press button on printer markes scan to scan any more.

    Click on a model name below to access the download page.
    A  √ below represents the corresponding Canon product being compatible with that version of Windows
    OS X
    Mavericks
    v10.9
    OS X
    Mountain Lion
    v10.8
    OS X
    Lion
    v10.7
    MP990
    MP980
    MP970
    MP830
    MP640
    MP640R
    MP620
    MP620B
    MP610
    MP600
    MP560
    MP530
    MP520
    MP510
    MP499
    MP495
    MP490
    MP480
    MP470
    MP460
    MP280
    MP270
    MP250
    MP240
    MP230
    MP210
    MP190
    MP180
    MP140

Maybe you are looking for