Canon MP600 scanner not working - help!!

I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I've updated and installed all the drivers from Canon's website. I cannot figure out what is causing the problem, or how to rectify it?
Please offer any help you can. Thanks!

Hi all,
I had the same issue with a Canon MP600. Printing
did work, but it refused to scan with scanner not connected
message.
I updated all the drivers, no luck.
As a last resort, I changed the USB cable to a certified
USB 2.0 high speed one and it started scanning
I would suggest to try the following procedures:
- find a USB high speed cable
- connect just the mac and the printer
- test
If it it works it might be the old cable or some
interference with another USB device.
Reconnecting one at a time the other devices will
be the final step .
If it does not work also after having updated the
drivers and standalone with a Hi-speed USB cable
I have no additional clues, sorry.
Hope it helps

Similar Messages

  • Cannon MP600 scanner not working with Mavericks.

    Get this error message MPP navigator 304.pkg can’t be opened because it is from an unidentified developers.
    No updated drivers at Cannon website. Printers side working fine.  Had to open MP Navigator from Apps (right Faff to get scanner to work) Can not just press button on printer markes scan to scan any more.

    Click on a model name below to access the download page.
    A  √ below represents the corresponding Canon product being compatible with that version of Windows
    OS X
    Mavericks
    v10.9
    OS X
    Mountain Lion
    v10.8
    OS X
    Lion
    v10.7
    MP990
    MP980
    MP970
    MP830
    MP640
    MP640R
    MP620
    MP620B
    MP610
    MP600
    MP560
    MP530
    MP520
    MP510
    MP499
    MP495
    MP490
    MP480
    MP470
    MP460
    MP280
    MP270
    MP250
    MP240
    MP230
    MP210
    MP190
    MP180
    MP140

  • Canon MG5140 scanner not working

    Please help me, I have just recently upgraded from a late 2008 model MBP, to a new 15" Retina MBP.
    I have a Canon Pixma MG5140 multifuction printer/scanner.  On the old MBP everything worked fine.
    Yet on the new Retina machine the scanning function does not work. The printing function works fine, just no scanning
    I went onto the Canon website and down loaded the most current software and device drivers, but to no avail the machine stil won't scan. A dialougue box, opens up saying that the device is not connected or the drivers are incorrect.
    Does anyone have any advice regarding this problem?  Would appreciate any help.
    Thanks

    Check that the driver is up to date.
    Canon drivers for Mavericks:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware

  • Canon Mp600 will not work when I try to use photoshop print settings since I upgraded to latest Maverick?

    I upgraded to latest Maverick . Now when I use PhotoshopC5 my print settings crash every time I even touch the button. My printer is a Canon MP600 and worked with all Photoshop settings until this week. Help!

    The last driver that Canon released for the MP600, v10.5.1.2.0, was for Mac OS X 10.7. Since you mention upgrading to Mavericks you could have a driver version earlier than this. You can check by opening Printers & Scanners, selecting the MP600 and then clicking on Options & Supplies. With the General tab selected you will see the driver version.
    Now even if you do have the latest version there is no guarantee that it will be compatible with all applications on 10.9, especially the CS5 suite. You could try installing Gutenprint v5.2.9 to get a driver more compatible with the latest OS. Or if colour management is a requirement for Photoshop printing then you may need to purchase Printfab, although since you are using an MP600 then I would assume that you are not overly concerned with colour accuracy. Another option is to export the image from Photoshop as a PDF and then open this in Preview and print from that application.

  • Canon Printer scanner not working

    I have a Canon Imaginclass laser multifunction printer, but the scanner does not work. Can anyone give me a detail steps to show me how to fix this problem?

    What is the error message?
    Try resetting the printing system.
    Reset Printing System

  • Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working

    Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
    The scanner works great in the Canon scanner software and other devices but not Acrobat.
    When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
    I had a HP scanner before and all options where there and worked great.
    Anyone know of any fixes for this?
    Cheers

    The scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
    There is the WIA Canoscan  and a Canoscan 9000f listed and when you select either of these you get these messages.
    also here is the twacker result with 2 entries

  • Canon MP600 Scanner not recognised

    OSX 10.8.4 does not recognize my scanner in the Canon MP600 anymore plase advise why this is and how to correct it

    Look in the HD/Library/Applications Support/Canon folder.  That's where the driver for my Canon printer is located. If you install it for only the current user and not all users it might be in the Users/Home/LIbrary/Application Support/Canon folder.
    For other files for the printer look in the HD/Library/Printers folder.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    OT

  • Canon MG5250 Scanner not working with OSX 10.7.2 HELP PLEASE

    I have tried to get my canon mg5252 multifunction to scan, im using OSX Lion 10.7.2, I have tried downloading the canon drivers (mp 4.0.3 and ica driver 1.9.0) but still cant get it to work !
    Any help is greatly appreciated !
    Thanks
    sc

    Uninstall the device using Canon's instructions. Then assuming you are using a USB connection to connect it to your computer restart the computer in Safe Mode to clear some caches. Then restart the computer normally. Then connect the printer to the computer via USB and turn on the printer. The printer should then be seen in the Print & Scan preferences. If not run Software Update. To scan use Image Capture (it's preloaded on your computer) and scan using the Image Capture tool.
    If you still have trouble then follow the instructions in Printing Overview OS X Lion.

  • Canon MP495 Scanner not working

    Hi all,
    I have setup my Canon MP495 all-in-one printer on my iMac and while it is printing fine, the scanner just isn't working. When I go into Print & Fax in the system preferences the Canon MP495 is only displayed under the Printers heading.
    So I tried clicked on the + button and my Mac finds a device called Canon MP495 series with a kind of Bonjour Scanner. At this point I thought ah there we go sorted. But once I have clicked on that device and clicked Add. When I open the scanner it just says Trying to open scanner session and gets stuck there.
    Does anyone have any ideas as to how I could fix this?
    Thanks,
    Mike.

    Thanks for the suggestion, unfortunately it didn't work.
    I noticed that when the printer was plugged in via USB it had 2 tabs when in the Print & Fax section. One said Print and the other said Scan. Where as when the printer is connected via WiFi there are no tabs???
    I have uploaded some screenshots:
    This one shows the printer setup for use over WiFi (I can print using this one but not scan):
    This one shows the same page but after I have plugged the printer in via USB, you will notice the printer has appeared again:
    This one shows the settings page for the second printer that appeared (the one connected through USB). You will notice it has the 2 tabs at the top saying Print and Scan:
    Anymore suggestions would be greatly appreciated
    Thanks.

  • Canon mf4720w scanner not working on windows 10

    i've updated to the latest windows 10 driver. printer is working fine but the scanner is not. the mf toolbox doesn't recognize the driver... 

    OK, after reading about people having the same problem after upgrading to Windows 8.1, it appears all you have to do is uninstall the Toolbox and drivers, re-install them, and after rebooting the computer everything seems to be working again.

  • Canon MP510 scanner not available under 10.9, who can help?

    Canon MP510 scanner not available under 10.9 since update, who can help?
    Canon informed me that Apple does not support this device any more, apple informed to contact the manufacturer.....
    Any ideas how to activate scan function again?
    Printing is okay under 10.9 and under 10.8 scan+print was okay.

    Canon has a scanner driver and the MP Navigator scanning application for the MP510 for OS X 10.8 so you could try installing them on your 10.9 Mac. I am not sure if either file is digitally signed, so Gatekeeper will block the installation. To install them, you can Control-click on the respective installer and select Open from the pop-up menu. You will then be given the option to install.
    And for the record, Canon makes the drivers - not Apple, so it is Canon that is not supporting the MP510 on OS X 10.9.

  • I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    You need to reinstall the printer driver, and set up the printer on the new hard drive.
    The Canon site should have the driver. Download it and install.
    Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

  • Just upgraded my Cannon MP Navigator App for my multi-purpose printer/scanner not working correctlly

    After upgrading to Yosemite MP Navigator App for my Cannon scanner not working properly, Buttons are not active and do not respond .... it works on my laptop with Mavericks ... I will be reverting back to Mavericks .. I use my Scanner a lot . Apple please fix this problem.

    I have the same problem with a Canon MP530 under Yosemite. I'm not sure why Canon can't get their act together to have updated drivers and software. Very aggravating.
    I can confirm that pmt513's workaround works. That's fine for single pages. But what about batch scanning?
    Here's another partial workaround. The main MP Navigator interface still allows you to do the scanning, both single pages and batches. You just can't save, send, or export those scans. But the temporary files are on your disk in TIF format. If you don't mind taking those and converting them to PDF or JPG (which you can do in Preview), then just look in the following folder to the files:
    ~/Library/Caches/Temporaryitems/MP Navigator 2.2/SCN_MFP
    I have put an alias to it on my desktop so that I can easily access the scans. Be sure to copy the TIF files out before you close (and thus clear) the MP Navigator window as that also clears the files from that cache folder.
    I hope this helps some of you.

  • My canon printer does not work with firefox12

    my canon printer does not work firefox 12 edition

    Try to reset the print prefs.
    See:
    *http://kb.mozillazine.org/Problems_printing_web_pages
    *https://support.mozilla.org/kb/Printing+a+web+page
    There are other things that need your attention.
    Please Update to the latest Firefox 17.0.x version.<br />
    The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

Maybe you are looking for