Canon MP610 scanner

As of 2.40 pm (Cdn) customer support confirmed that the Navigator 1.0.4 will not work for the MP610 with Leopard and to wait for an update.
I wonder how much longer.....
As of the CD Label-print software available at Canon.UK: not for Canada (in other words, in the UK an MP610 owner can print directly on CDs but not in Cdn and possible not in the US).
Alain

I have the Canon MP600, so yes, we just have to wait for the update.
It should be pretty soon, so keep checking back.

Similar Messages

  • Canon MP610 scanner software freezes when scanning on my unibody macbook pr

    So my scanning function has been fine until i upgraded to the new unibody macbook pro. I"ve gone to the canon site and downloaded all the software and drivers and it's still doing it. I'm so frustrated with this, if anyone has experienced the same issue or know about it, please help!

    Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
    I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
    - ICA Driver V4.0.0
    - Canon IJ Network Tool V4.5.0
    I'm not sure if these are the correct / complete drivers I need for this install or not.
    I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
    I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
    After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
    I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
    So, at this point I am stuck??
    Thanks
    Stephen

  • Can't load drivers for Canon MP610 onto new iMac since loading Leopard

    Hello, all you amazingly helpful folks.
    Bought new iMac + Canon MP610 yesterday. Successfully installed printer on 3 Macs and a PC, and all was well.
    Then--discovered that Leopard DVD was hiding in the box. So, installed Leopard uneventfully. Then--found that scanner wouldn't respond to any commands, and subsequently, I could no longer print from the new iMac ONLY (other Macs still printing fine).
    So--I deleted all Canon printer-related folders on the new iMac, and tried to re-load the drivers from the Canon CD. MP Drivers won't load. Keep getting FAILURE message. Tried re-booting, unplugging, in all combinations. Printer still works from the other Macs. Maybe loading Leopard after the original MP610 installation confused things??
    What to do next?
    Also--NO DRIVERS available for MP610 on Canon web page.
    Any assistance much appreciated!!!
    Thank you.

    You may have already done this so forgive me if you have, but I would try deleting the contents of the /Library/Printers/Canon/BJPrinters folder. I would then navigate to the /Library/Receipts and delete the Canon MP610 xxx.pkg file.
    Then control-click on the Printers list in Print & fax and click on "Reset printing system..."
    Then empty the Trash, unplug the MP610 USB and restart the iMac.
    Then I would install the MP610 v6.91 OS X driver. I found it via the Canon Australia web site (http://www.canon.com.au/products/allin_one_printers/all_in_one_printers/mp610support.aspx).
    Once the installation is complete, reconnect the MP610 to the iMac and wait. The printer should automatically appear in the Print & Fax application.
    Also, in future, you should be posting this on the Leopard printing forum...

  • Canon MP610 installation

    I purchased the Canon MP610 after reading rave reviews (and supposedly how easily it installs with OSX!).
    The problem: I seem to have misplaced the installation CDs and none of the drivers or software I've downloaded from Canon are working. Even after reinstallations. This monster of a printer/scanner machine just doesn't recognize my Macbook when it's plugged in.
    After extensive Googling and research, I still can't figure it out. I'm hoping someone here has used this popular Canon all-in-one with OSX 10.5.2 and has some tips?

    Tha_Dogg wrote:
    Hi there
    I'm still fighting to get the scanning part done. Here's what you need to take from canon-asia :
    Cheers
    Is the mp610 scanner part detected by sane (scanimage -L) ?
    Did you modify the installed files :
      /etc/udev/rules.d/80-canon_mfp.rules
    and
      /usr/lib/bjlib/canon_mfp.conf
    to add the mp610 scanner ? (udev needs then to be restarted => better to reboot the computer)
    Last edited by nicolos (2007-10-18 21:02:41)

  • Canon MP610 - MP Navigator EX will not open - crashes

    So I bought my MP610 yesterday, came home, unpacked and set it up, installed software and drivers - all I want to do is scan something important but MP Navigator EX refuses to open. I went to the Canon site, downloaded and installed latest drivers etc. but the result is always the same... whenever i double click the MP Navigator EX application I get a message saying -
    The application MP Navigator EX 1.0 quit unexpectedly and when I click on the option to Reopen I get -
    The application MP Navigator EX 1.0 quit unexpectedly after it was reopened
    - This is the Error Report -
    It's 8 pages long so I think it's best not to post it! However, these are the first two lines -
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0x58000000
    If anyone can divine error reports I would be happy to post the lot!
    Please help - it's so frustrating to buy a product and follow all the instructions to the letter and then not be able to use the machine!
    Cheers
    Tricia

    Hi PaHu,
    I think I'm getting myself into the deep and sticky here. I've not used Image Capture before so I read through the Help files before I started - it seemed quite straightforward and I was able to set Adobe Photoshop 7 as the app. that the print colour icon on the MP610 'links' to (i.e. the button that is either 'colour' or 'Black') I also changed the field next to 'Automatic Task" from Preview.app to Adobe Photoshop 7. However, as soon as I clicked on overview and selected the area I wanted to scan (even though I had two photos on the platen I could only select an area of one of them - is this normal?) and then clicked the Scan button I got the message advising 'The application Image Capture unexpectedly quit. Nothing else is affected blah blah blah.
    I went to Finder and double clicked Image Capture, this brought up the Scan dialogue window headed 'Canon MP610 Series' The fields are -
    Download to:
    Name:
    Format:
    Automatic Task:
    Occurs after scanning
    Then there are two buttons at the bottom of the dialogue box - the one on the left says Options...
    the one on the right says Scan...
    Clicking either of these buttons causes the return of the dreaded message 'The application Image Capture unexpectedly quit etc. etc.
    It seems that whether I use MP Navigator EX, Preview or Image Capture as soon as I try to Scan it causes the app. to 'unexpectedly' quit. I've never had something like this happen before so I'm not sure what could possibly be causing it.
    Should I uninstall the whole Canon Utilities folder and start from scratch - I just can't work out what's going on at all.
    I'll be back on the boards later this morning but that's it for me for tonight!
    Cheers
    Tricia

  • Canon MP610 printer driver

    After updating to OS 10.8.3 on my iMac 27 I can no longer use my Canon MP610. This printer has ALWAYS worked with Lion and Mt. Lion all versions. When I go to print a document there is no printer available. When I try to add my MP610 there is a message that says
    "The selected printer software is available from Apple. Click Add to download it and add this printer."
    Upon clicking add another windown says
    "Setting up Canon MP610 series"
    then goes into finding software mode and the progress bar gets about half way and this error message appears:
    "Can't install the software for the Canon MP610 series because it is not currently available from the Software Update server."
    I have downloaded the Mt. Lion driver from Canon, installed the package successfully and it still wants to go looking for the driver on the Software Updarte server; unsuccessfully. After an hour on the phone with both Apple and Canon, no one has a solution.
    Why cant the OS recognize the manually downloaded and installed driver that already exists on the hard drive as it has always done? It's as if it is now programmed to only go the the Update server to look for the software and it's not there. Perplexing. USB printers are supposed to be plug and play. 
    I have noticed that Apple has removed all Canon printers from the Apple Store. What happened? Has Apple abandoned Canon or is it the reverse.
    Thanks in advance.

    This issue, which can happen to any brand of printer, can often be resolved by resetting the printing system.
    As for Canon and Apple, the Australian store is still selling Canon AirPrint printers.

  • How to install Canon LIDE60 scanner plugin & scan direct in PhotoShop CS4?

    I just installed CS4 PhotoShop on my MBPro and can't remember how to install Canon driver for my Canon LIDE60 scanner so that I can scan directly from the PhotoSHop IMPORT menu? Can anyone please help? Thanks

    I found out that I had installed the Canon drivers OK, I just had to download the Adobe Photoshop CS4 Optional plug-ins and ReadMe http://www.adobe.com/support/downloads/detail.jsp?ftpID=4047 and after a restart it all works fine in CS4, OS X 10.5.6

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working

    Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
    The scanner works great in the Canon scanner software and other devices but not Acrobat.
    When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
    I had a HP scanner before and all options where there and worked great.
    Anyone know of any fixes for this?
    Cheers

    The scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
    There is the WIA Canoscan  and a Canoscan 9000f listed and when you select either of these you get these messages.
    also here is the twacker result with 2 entries

  • Has anyone managed to make the Canon 8000F Scanner work on this system?

    has anyone managed to make the Canon 8000F Scanner work on this OX system?

    Part of the problem is that this is probably not a "logical" error.  The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
    http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
    And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
    http://forums.adobe.com/message/6004428#6004428

  • Canon MP610 not found

    Hello, everyone!
    I bought a Canon MP610 a few months ago and only recently tried to install it. I installed the drivers back when I was running 10.5 and couldn't access the printer from my Mac, via USB or otherwise. Whenever I went to 'add new printer' I just couldn't find it anywhere. Having heard something about the improved printer drivers in 10.6, I upgraded and had the same problem. I just couldn't find my printer listed anywhere on my Mac.
    Since then, I've scoured many internet discussion boards, including this one, for solutions. I've downloaded just about every MP610 driver I can find from the Canon website and from the Apple website. I've installed them all, rebooted, and still nothing.
    I'm fairly Mac literate, but nowhere near an expert, so I'm hoping one of you will come along and say, "Oh, well you just need to do this..." and everything will be fine again. Any help is much appreciated, and feel free to state the obvious, just in case I've missed it.
    Many thanks,
    Stephen

    Hello Stephen,
    Given that the printer cannot be seen by the Mac, and the only connection method is via USB, then you may have a faulty USB. That is assuming you are connecting the printer directly to the Mac. Your opening post where you mention 'via USB or otherwise' makes me wonder what you mean by 'otherwise'.
    If you are definitely connecting directly to the Mac via USB, then open the System Profiler application and under the Hardware items you will see USB. Select this and see if the MP610 is listed under any of the USB busses. If it is not, then the cable is a likely cause or the printer itself is faulty.
    If the printer is displayed, then it should also appear when you select to Add the printer queue and use the Default view. Is this happening?
    Pahu

  • Canon MP610 crashes Freehand MX - PLEASE HELP.

    Hey Everyone.
    I just bought the Canon MP610 Inkjet printer.
    *Day 1, I installed all the supplied Canon Software, drivers etc.*
    Tested the printer from Freehand MX, Apple Mail, etc - and it worked brilliantly.
    *Day 2, Freehand MX started acting up.*
    When I open the print dialog box in Freehand MX and hit the "ADVANCED" button -
    I only get the very basic print options. Previously I got all the options where I could select papersize, cutmarks, registration marks, etc.
    *Freehand also crashes straight after I hit the print button!*
    I have trashed Freehand MX and re-installed it from crash and I still get the same problem.
    I'm thinking that it's a PPD issue, but I'm not smart enough to be sure.
    Any advice on this problem will be greatly appreciated.
    THANKS.

    Here is your answer:
    http://freefreehand.org/forum/viewtopic.php?f=5&t=4&sid=7db71927d7aba4c1c1e6e66998827853

  • I upgraded my software to OS X version 10.9 and now my Canon MP145 scanner doesn't work, what should I do ?

    I upgraded my software to OS X version 10.9 and now my Canon MP145 scanner doesn't work, what should I do ?

    Welcome to Apple Support Communities
    There are two Applications folders: /Applications (in the root level of the hard drive) and ~/Applications (in your user folder).
    If you have a look at the bottom part of the screenshot, you can see where Chess is stored, and it indicates that it's stored in /Applications, so you are looking for applications in the wrong folder.
    Open a Finder window, go to Finder menu (on the menu bar) > Preferences > Sidebar, and mark Applications. Then, close the Preferences window and you will be able to access to the Applications folder in the Finder sidebar. Another option would be to go to View menu (on the menu bar) and type:
    /Applications

  • Canon 5600f scanner doesn't work with Snow Leopard

    Please someone help - I made the mistake of upgrading to snow leopard. My new Canon 5600f scanner now does not work. Pop up says it has wrong driver. OK.. Downloaded EVERY Canon driver possible + the updated Navigator EX 2.0 software. Note I HAVE downloaded these files, specifically for this model of scanner, specifically for snow leopard: http://software.canon-europe.com/products/0010652.asp. I have rebooted the mac about 4 times. Please, what am i doing wrong?!

    Pahu,
    I too upgraded to Snow Leopard last night and have been having trouble with my 5600F all day. I'm glad I can still use the scanner in the Image Capture tool, but I would like to use the MP Navigator EX as well. I downloaded:
    Scanner Driver 14.8.2
    ICA Driver 1.1.1
    ver Solution Menu 1.4.0
    MP Navigator EX 2.0.4
    MP Navigator EX 2.0 Opener
    and On Screen Help 1.10
    The download area for the MP Navigator EX 2.0 Opener reads "In Mac OS X 10.6, you will need to set up MP Navigator EX 2.0 Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons on the machine."
    I'm having trouble setting up the opener in Image Capture. The scanner still scans beautifully through Image Capture, I would just like full functionality back. Any suggestions? Thanks!
    Tangor

  • I recently install Lion OS on my iMac and just found out that my Canon 4400F scanner won't work with Lion, what can I do to get it working again?

    I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of buying a new scanner? I am also upset that my Microsoft Office Professional will no longer boot as well. Anyone know why this took place?

    If it will not longer work due to Lion, it's most likely becasuse no drivers for Lion have been released.  No way to get aroud it other than going back to Snow Leopard.  MS Office wont work if it is '04 or earlier becasue it is a PPC application.  Mac switched from PPC to Intel in 2006 and created the Rosetta emulator to allow companies to make their software compatable or allow users to buy new software.  After 5 years, Rosetta support was dropped, with the release of Lion.  No way to get this software to work with Lion.

Maybe you are looking for