Canon MT-24X; for use outside a Fotoflex light cube for product shots?
My first post; Hello,
About Canon MT-24X macro twin flash unit.
1.
I use a light cube with 32" in. from Fotoflex (LINK REMOVED - SEE FORUM GUIDELINES ON POSTING LINKS TO 3RD PARTY SITES)
to shot some objects.
Will I be able to use the MT-24X flashes away from camera with table tripods and put them on each side of the cube to filter the light and most important are the flashes strong enough for such a distance? What´s you opinion as a users?
2
Can I use this twin flashes away from the camera in a wireless mode with some kind of additional wireless unit?
Thanks very much.
Best.
Hi,
thanks for your help.
I want that MT-24X flash because I own a Canon MP-E 65mm macro lens. A very tricky lens and need proper light.
At x5 magnification light in needed ,-)
I thought about using just the MT-24X for regular macro shots but also with the cube. But it seems not possible.
Now. seeking for a solution I need confirmation on a different setup that is:
I think the MT-24X can be used as a master>slave set with another Canon flash (don´t know yet if all if some of the Canon flashes). You as owner must know about this wireless comunication capabilities.
Imagine a scenario with a still life object inside my cube.
That way I would be able to use the MT-24X mounted as it should be, in front of the cube to make the shot and use an additional (one or two) wireless Canon flashes standing at the sides of the cube.
Two kinds of light: direct from the macro flashes (front) and diffused by the cube from the sides.
I don´t know if I´ll need 4 flashes but would like to know if this is a working possibility.
Similar Messages
-
Color Consistency For Product Shots
I'm doing product shots for my wife's eBay sideline.
The problem I'm having is that I will take multiple shots of an item, and despite my best intentions the color will be slightly different in each shot (enough so that when placed side-by-side on a web page, it's clearly and amateurishly different).
Here's some details about what I'm doing:
I'm usually shooting in front of a large window so it's mostly natural light. Sometimes I'll use an overhead flash, but if I do, I do so for all shots. It's not like some shots include flash and some don't. So the lighting should be consistent.
I'm usually shooting against a full white background (or full black)
My white balance is set to Auto
My exposure is manual
I'll usually try to start the shoot with a shot of a gray card. Then in Lightroom, I'll set the white balance for that shot by sampling the gray, and then copy/paste that white balance develop setting to all other shots.
So other than perhaps the Auto WB setting, I'm not sure what I'm doing wrong in the shooting to get different colors.
But that aside, this seems like something that should be fixable in LR, but despite copying the WB setting, I can't figure that out either.
What I would really like to be able to do is use the eyedropper tool on Image 1, then sample what should be the same color (but isn't) on Image 2 and say "LR, do whatever you need to in order to make the sampled color in Image 2 the same color as the sampled color in Image 1".Gray cards (unless designed specifically to be so) are exposure guides, not color temperature guides. A white balance target would do you a better job.
The gray card is from Scott Kelby's Lightroom book, and he specifically mentions using it for color correction (actually, the technique for copy/pasting the WB settings gathered from the card is from his book, too).
Also, in the Lightroom manual, it says "Move the White Balance Selector into an area of the photo that should be a neutral light gray. Avoid spectral highlights or areas that are 100% white."
It is the color of the background that varies that gives it away in a grid of images.
When I get home, I'll try to attach some sample images. But in general, the backgrounds are pretty consistently solid white - it's the coloring on the product that's different. Depending on my time and how expensive the item is, I'll use Photoshop to ensure the background is 100% white.
Without a constant light source (window light changes over the course of time) you really can't depend upon copying and pasting the settings.
Yeah, I know. I'm trying to convince my wife to use her eBay profits to buy me a properly lit mini-studio, but until then, I'm stuck with what I have (referring to the situation, not my wife!). But also, the shots are usually within a few seconds of each other - it's not like the light is changing that much, at least not enough to account for the differences.
I have a feeling that it might actually have to do more with exposure. Like the color balance might be OK, but one shot is just underexposed and so the colors appear darker. But you'd think that the LR exposure controls would be able to do that, but so far I just can't get it dialed in. -
We have a shop with around 4500 products and 100's of catalogues in it.
We have given it an overhaul and want to make it SEO proof.
We would appreciate feedback on our solution:
FOR PRODUCTS (CANONICAL):
Weve put in a rel="canonical link" in the large products layout template and the custom 4 tag fills in the canonical url. This is then pushed into the head section.
<link rel="canonical" href="{tag_custom4}"/>
FOR PRODUCTS (META DESCRIPTION):
<meta name="description" content="My site is provides {tag_name} products including {tag_custom1}, {tag_custom2} & {tag_custom3}." />
This is then pushed into the head section.
Has anyone tried this method.
NOTE: FOR CATALOGUES
Does anyone know how you can download the catalogue spreadsheet with the current catalogue data in it.? We seem to be only able to download the template.
Thanks for you assistance and advice
Jay Jay - Broadbeach MediaCANONICAL:
May I ask why? In that sense it has no relevence.
Conicial is a suggestive meta for search engines like google, not a directive, they can choose to ignore it. The goal of conical in a product sense for eCommerce is if you have a product under multiple catalogs and thus multiple URLs. You apply this to the one url you want to inform search engines is the prefered one to use and rank on.
With your implementation this adds it to all possible links thus non relevent.
If it is to suggest in terms of the development url - site.businesscatalyst.com (or branded site url) then not useful either. All you do for this is go to the development url in the doman manager, edit and click the new tick box that does a perminant redirect of all those URLS.
DESCRIPTION:
That is fine but you are using all your custom fields up and have repitition, it is better to just use one custom field and have it as all the description so you can say differently for each product and easily managed via the spreadsheet import / export.
Catalogs:
Yep, was not that long ago you had nothing
Hope that helps.
Note:
For anyone that suggests using the editor page properties for Meta on products, add a description, change it or remove it and add a new one. Go to the product page and view the source. See all those empty description meta tags that come before the last one you did and so the first read by google? - That is useful hey
Just one of a number of issues using that - dont -
I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?
On your phone (from http://support.apple.com/kb/ht1311):
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information. -
I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
BrianI found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online. -
I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader". Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog." I'm puzzled by this message and don't know what to do o get my photos. Any suggestions?
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Terms and condiditions for Spain exclude the use outside El Salvador
The terms and conditons page for El Salvador and that for Spain seems to be the same. The problem is that for Spain it forbides the use outside El Salvador!:
«El Servicio iTunes está disponible para usted sólo en EL Salvador. Usted acepta no utilizar o intentar utilizar el Servicio iTunes desde afuera de estos sitios. Apple puede utilizar tecnologías para verificar su cumplimiento»
Maybe its its an issue with the use of the code ES for both countries…I've reported it to the hosts on here, so hopefully they will be corrected.
-
How can I get the shutter count for my Canon 7D Mark II using Windows XP?
How can I get the shutter count for my Canon 7D Mark II using Windows XP? I've been looking lots of places and doing some file uploads, but I can't seem to find anything. I'm wary of downloading software I know nothing about. Any help is greatly appreciated.
Solved!
Go to Solution.Nevermind, just, sort of answered my own question. Doesn't work on XP, but using a Win 7 'puter I was able to use Shutter Count, which now works w/ the 7D Mark II.
-
Can i get a sim card for an unlock iphone 4 to use outside the country
can i get a sim card for an unlock iphone 4 to use outside the country? i bought an iphone 4 unlocked but it didnt come with a sim card and my old phone the sim card wont fit so where can i get a sim to fit and work in the new iphone 4 in another country.
You would get it from whatever carrier you were going to use.
-
The STOP statement was used outside a report flow.
Hi Gurus,
when i am executing this program it is going to short dump.
pls help me out.
thanks in advance.
Runtime Errors STOP_NO_REPORT
Date and Time 06.10.2008 12:10:06
Short text
The STOP statement was used outside a report flow.
What happened?
Error in the ABAP Application Program
The current ABAP program "YMRP0003" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The STOP statement is only useful in specific events of the report
processing (that is, the execution of a type 1 program). In this case,
there was no report flow, so the statement could not be executed.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
System environment
SAP-Release 700
Application server... "ciRDE"
Network address...... "10.131.28.7"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "hpx190"
Database type..... "ORACLE"
Database name..... "RDE"
Database user ID.. "SAPDAT"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 20:48:34"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 157
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 65536
MM Used. 3492016
MM Free. 695200
User and Transaction
Client.............. 050
User................ "MBAGGALA"
Language key........ "E"
Transaction......... "CC31 "
Transactions ID..... "48E9EB60C2944602E10000000A831C07"
Program............. "YMRP0003"
Screen.............. "SAPMC29C 0020"
Screen line......... 22
Information on where terminated
Termination occurred in the ABAP program "YMRP0003" - in "SCM-MRP-FSE-12_02".
The main program was "SAPMC29C ".
In the source code you have the termination point in line 138
of the (Include) program "YMRP0003".
Source Code Extract
Line
SourceCde
108
109
110
*This function module read the status of an object
111
112
CALL FUNCTION 'STATUS_TEXT_EDIT'
113
EXPORTING
114
client = sy-mandt
115
flg_user_stat = lc_flagx
116
objnr = ls_ecm_data-objnr
117
only_active = lc_flagx
118
spras = sy-langu
119
IMPORTING
120
line = lf_sttxt
121
user_line = lf_asttx
122
EXCEPTIONS
123
object_not_found = 1
124
OTHERS = 2.
125
126
CHECK NOT sy-tcode EQ 'CC32'.
127
*-- Begin of Changes made by DGupta1 on 07/12/2006--
128
Changes are made to update the Change Number Dates While Calling CC32
129
from custom transaction YC06 only
130
CHECK NOT sw_yc06 EQ 'X'.
131
*-- End of Changes made by DGupta1 on 07/12/2006--
132
133
CHECK NOT lf_sttxt CS 'ECCM' AND NOT lf_sttxt CS 'ECOR'.
134
135
136
IF ls_ecm_data-datuv NE lc_maxdate.
137
MESSAGE s011.
>>>>>
STOP.
139
ENDIF.
140
141
142
IF lf_lastd < lf_artwd.
143
MESSAGE s012.
144
STOP.
145
ENDIF.
146
147
IF ls_ecm_data-lvorm = lc_flagx.
148
MESSAGE s013.
149
STOP.
150
ENDIF.
151
152
WRITE: lf_lastd TO lf_lastd_string.
153
WRITE: lf_artwd TO lf_artwd_string.
154
155
156
IF ls_ecm_data-ccart NE lc_fixd.
157
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
40
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ARC0H
SY-UCOMM
FCBU
SY-TITLE
Create ECR: Object Types
SY-MSGTY
S
SY-MSGID
YMRP
SY-MSGNO
011
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081006
SY-UZEIT
121006
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 FORM YMRP0003 YMRP0003 138
SCM-MRP-FSE-12_02
6 FUNCTION SAPLXCCA ZXCCAU05 39
EXIT_SAPMC29C_005
5 FORM SAPMC29C MC29CFS1_SAVE_USER_EXIT 36
SAVE_USER_EXIT
4 FORM SAPMC29C MC29CFF2_FCODE_FCBU_EXECUTE 88
FCODE_FCBU_EXECUTE
3 FORM SAPMC29C MC29CFO1_OKCODE_CHECK 252
OKCODE_CHECK
2 MODULE (PAI) SAPMC29C MC29CI10_OKCODE 12
OKCODE
1 MODULE (PAI) SAPMC29C MC29CI10_DYNPRO_CALL 11
DYNPRO_CALL
Chosen variables
Name
Val.
No. 7 Ty. FORM
Name SCM-MRP-FSE-12_02
SY-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
SY-TCODE
CC31
00000000000000000000
00000000000000000000
44332222222222222222
33310000000000000000
SW_YC06
0
0
2
0
LF_STTXT
CRTD
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
4554222222222222222222222222222222222222
3244000000000000000000000000000000000000
SYST-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LS_ECM_DATA-DATUV
20081006
00000000
00000000
33333333
20081006
LC_MAXDATE
29991231
00000000
00000000
33333333
29991231
%_PRINT
000 0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
LC_FLAGX
X
0
0
5
8
SPACE
0
0
2
0
SY-MSGNO
011
000
000
333
011
LC_ITEM
EUR_SCM-PUR-FSE-12_02
000000000000000000000
000000000000000000000
455554425552454233533
552F33DD052D635D12F02
SY-MSGV1
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV3
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV4
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
LF_LASTD
00000000
00000000
00000000
33333333
00000000
LF_ARTWD
00000000
00000000
00000000
33333333
00000000
SY-SUBRC
0
0000
0000
No. 6 Ty. FUNCTION
Name EXIT_SAPMC29C_005
ECM_ALT_DATE
Table IT_665[0x202]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_ALT_DATE
Table reference: 113
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 000000710000029900000000000000CAFFFFFFFF
TABH+ 40(16) = 040000DB000006200010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 113 (0x00000071)
label = 665 (0x00000299)
fill = 0 (0x00000000)
leng = 202 (0x000000CA)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000018
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_DATA
050 01001020081006 00000000 00000000 dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
ECM_EFFECTIVITY
Table IT_666[0x464]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_EFFECTIVITY
Table reference: 126
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000007E0000029A00000000000001D0FFFFFFFF
TABH+ 40(16) = 040000DB000006800010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 126 (0x0000007E)
label = 666 (0x0000029A)
fill = 0 (0x00000000)
leng = 464 (0x000001D0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000020
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_HIERARCHY
Table IT_667[0x120]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_HIERARCHY
Table reference: 110
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006E0000029B0000000000000078FFFFFFFF
TABH+ 40(16) = 040000DB000006B00010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 110 (0x0000006E)
label = 667 (0x0000029B)
fill = 0 (0x00000000)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000021
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_MNT_VALUE
0000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222223333333333333333222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ECM_OBJMNGREC
Table IT_668[0x600]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJMNGREC
Table reference: 107
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006B0000029C0000000000000258FFFFFFFF
TABH+ 40(16) = 040000DB000005C0001024C401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 107 (0x0000006B)
label = 668 (0x0000029C)
fill = 0 (0x00000000)
leng = 600 (0x00000258)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000016
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_OBJ_TYPE
Table IT_669[28x192]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJ_TYPE
Table reference: 116
TABH+ 0(20) = C0000009448BF3E0000000000000000000000000
TABH+ 20(20) = 000000740000029D0000001C000000C0FFFFFFFF
TABH+ 40(16) = 040000DB000005600010249421800000
store = 0xC0000009448BF3E0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 116 (0x00000074)
label = 669 (0x0000029D)
fill = 28 (0x0000001C)
leng = 192 (0x000000C0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000014
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC0000009448B8270
pgHook = 0xC0000009448BF440
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 195 (0x000000C3)
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x00000030)
lineAlloc = 48 (0x00000030)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x00000002)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
TRANS_TYP
H
0
0
4
8
D_ASTTX
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
L_ITEM
EUR_SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
455554424552454233533222222222
552F33DDD20D635D12F02000000000
LI_YBS00001
050EUR_SCM-MRP-FSE-12_02 YMRP0003 SCM-MRP-FSE-12_02
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3334555544245524542335332222222225455333322222222222222222222222222222222544245524542335332222
050552F33DDD20D635D12F020000000009D2000030000000000000000000000000000000033DDD20D635D12F020000
SY-SUBRC
0
0000
0000
SYST
#######################(###############Z################################################XC####
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E000100
0000000000000000000000020000000000000005000000000100000000000000000000000000010900000001540000
0000000100000A0000000108010001000000000A0000000000000000000000000000000000000B000008000083000C
LI_YBS00001-REPORT
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LI_YBS00001-FORM
SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
544245524542335332222222222222
33DDD20D635D12F020000000000000
LS_YBS00001
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LS_YBS00001-ENABLED
0
0
2
0
LS_YBS00001-REPORT
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
LS_YBS00001-FORM
000000000000000000000000000000
000000000000000000000000000000
222222222222222222222222222222
000000000000000000000000000000
SYST-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
No. 5 Ty. FORM
Name SAVE_USER_EXIT
RET_CODE
0
0000
0000
SY-SUBRC
0
0000
0000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
DARSTAB[]
Table[initial]
AEDTB[]
Table IT_650[0x202]
\PROGRAM=SAPMC29C\DATA=AEDTB[]
Table reference: 129
TABH+ 0(20) = 0000000000000000C000000944A25D7000000000
TABH+ 20(20) = 000000810000028A00000000000000CAFFFFFFFF
TABH+ 40(16) = 0400000000000EF00010249401800000
store = 0x0000000000000000
ext1 = 0xC000000944A25D70
shmId = 0 (0x00000000)
id = 129 (0x00000081)
label = 650 (0x0000028A)
fill = 0 (0x00000000)
leng = 202 (0x000000CA)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000065
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0xC000000944AFAD80
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC000000944A23AF0
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
CC07
000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000
222222222222222222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000000000000000000
AENRB
050 01001020081006 00000000 00000000 dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
DARSTAB
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
22222222222222222222222222222222222222222200
00000000000000000000000000000000000000000000
AEEFB[]
Table IT_651[0x464]
\PROGRAM=SAPMC29C\DATA=AEEFB[]
Table reference: 105
TABH+ 0(20) = 0000000000000000C000000944AFADF000000000
TABH+ 20(20) = 000000690000028B00000000000001D0FFFFFFFF
TABH+ 40(16) = 0400000000000F500010249401800000
store = 0x0000000000000000
ext1 = 0xC000000944AFADF0
shmId = 0 (0x00000000)
id = 105 (0x00000069)
label = 651 (0x0000028B)
fill = 0 (0x00000000)
leng = 464 (0x000001D0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000067
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0xC0000009448F3220
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC00000094482B060
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
DCTAB[]
Table IT_35[7x16]
\PROGRAM=SAPMC29C\DATA=DCTAB[]
Table reference: 25
TABH+ 0(20) = C000000944921280000000000000000000000000
TABH+ 20(20) = 00000019000000230000000700000010FFFFFFFF
TABH+ 40(16) = 0400000000001BB00010249401800000
store = 0xC000000944921280
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 25 (0x00000019)
label = 35 (0x00000023)
fill = 7 (0x00000007)
leng = 16 (0x00000010)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000133
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)Dear Rajesh!
Please advise me, what have you done to resolve your problem!!??
I get next problem when i try to start some transaction:
Short text
Syntax error in program "SAPLPA_PACKAGE_SERVICES ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLPA_PACKAGE_SERVICES " in
include "LPA_PACKAGE_SERVICES$25 " in
line 13:
"The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLPA_PACKAGE_SERVICES :
"The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
Trigger Location of Runtime Error
Program SAPLSFW_COMMON
Include LSFW_COMMONU01
Row 117
Module type (FUNCTION)
Module Name SFW_GET_SWITCHPOS
Source Code Extract
Line
SourceCde
87
IF sy-subrc = 0.
88
<fs_switchpos>-switch_id = devc_resultline-switch_id .
89
<fs_switchpos>-state = devc_resultline-state .
90
<fs_switchpos>-text = devc_resultline-text .
91
92
INSERT <fs_switchpos> INTO TABLE resulttab. "Ergebnis merken
93
CONTINUE.
94
ENDIF.
95
96
97
READ TABLE gt_sfw_package INTO wa_sfw_package WITH TABLE KEY
98
devclass = lf_devclass
99
version = 'A' .
100
101
IF sy-subrc = 0. "Objekt ist in einem Paket mit Schalter
102
<fs_switchpos>-switch_id = wa_sfw_package-switch_id .
103
104
ELSE. "gucken, ob es sich um geschachtelte Pakete handelt
105
106
DO 20 TIMES.
107
108
CLEAR wa_superpackage .
109
110
READ TABLE gt_superpackage INTO wa_superpackage WITH TABLE KEY
111
devclass = lf_devclass.
112
113
IF sy-subrc = 0 .
114
lf_superpackage = wa_superpackage-parentcl.
115
ELSE.
116
>>>>>
CALL FUNCTION 'PA_GET_SUPER_PACKAGE_NAME'
118
EXPORTING
119
i_package_name = lf_devclass
120
i_direct_select = 'X'
121
IMPORTING
122
e_super_package_name = lf_superpackage.
123
124
125
wa_superpackage-devclass = lf_devclass .
126
wa_superpackage-parentcl = lf_superpackage .
127
INSERT wa_superpackage INTO TABLE gt_superpackage .
128
129
ENDIF.
130
131
IF lf_superpackage = space .
132
<fs_switchpos>-state = space .
133
<fs_switchpos>-switch_id = space .
134
EXIT. "Enstation !
135
ELSE .
136 -
wish to purchase v600 epson scanner for my mac.. have heard conflicting opinions on install.. use scanner's software cd or use outside software like nuvue ???
Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner. -
Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!
According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted. -
Error: "Variable State has been used outside the reusable components"
When I open a query in the ad hoc query designer I get several error messages like "Variable State has been used outside the reusable components." I don't what this means or how to fix it.
"State" is one of the variables used. And there is a error for every variable that is used.
All the variables are in the free characteristics.
When I open the query in Query Designer, it is ok.
Any ideas?Hi Fong,
PLease check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
It states that:
You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
Hope this helps... -
Need professional advise for product photography lens for Canon 7D
I am a graphic designer with a lot of experience in the studio but I now find myself needing to do my own product shots in my home studio space of 12' x 12.' I am looking hard at the Canon 7D moving up from 40D and I need to know the best lens or lenses to shoot items such as rifles, glassware, china, and small housewares, etc. I will also need to purchase either soft boxes or umbrellas and am looking for advise on this issue as well. Photos will be used for e-commerce and possibly for catalogs. All comments appreciated!
Amscot56 wrote:
I am a graphic designer with a lot of experience in the studio but I now find myself needing to do my own product shots in my home studio space of 12' x 12.' I am looking hard at the Canon 7D moving up from 40D and I need to know the best lens or lenses to shoot items such as rifles, glassware, china, and small housewares, etc. I will also need to purchase either soft boxes or umbrellas and am looking for advise on this issue as well. Photos will be used for e-commerce and possibly for catalogs. All comments appreciated!
Hi,
This is not an easy question that can be answered with a short reply, but here there are some items you might find helpful:
LENSES:
Considering the 1.6x crop factor of your EOS 7D, I think a Canon 50mm 1.4 USM should be fine for many of your shots, assuming you have enough space in your room and the item is not too large, otherwise you should go wider to EF 35mm f/2.0 IS USM or the more expensive EF 35mm f/1.4L USM
Of course, if you want a wider range of focal lengths to work with and lot more versatility, then you might want a Caon EF 24-70 2.8L II USM (our favorite) which has excellent sharpness and IQ, but it's more expensive. It's not so "fast" compared to the above, but in studio conditions you'll probably won't use faster apertures than f/2.8 or f/4
The advantage of these lenses compared to EF-S ones, is that if you switch to a full frame camera in future, you will be able to use them as well without any issues. Good investments in our opinion.
LIGHT STANDS & ACCESSORIES:
These are some cheap but very nice built quality stands & accessories that won't hurt your budget:
- Impact - Air-Cushioned Heavy Duty Light Stand - Black,9.5' (2.9m)
- Impact - Telescopic Collapsible Reflector Holder
- Impact - Umbrella Bracket with Adjustable Shoe
- Impact - Umbrella - White Translucent (43")
- Impact - Convertible Umbrella - White Satin with Removable Black Backing - 45"
Of course there are lot of other options, but these ones have worked pretty good for us, considering their price.
You can also attach softbox, etc.
Hope this helps!
Regards
HD Cam Team
Group of photographers and filmmakers using Canon cameras for serious purposes.
www.hdcamteam.com | www.twitter.com/HDCamTeam | www.facebook.com/HDCamTeam -
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.
Maybe you are looking for
-
I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.
-
Report Server service Error.
Hi, I am trying to configure Reports server non Cartridge but I am gettion following error message in reports server log file. *** 2000-01-25 22:16:02 -- Daemon failed to listen to port. i gave port number as 1951. If I try to start service in the wi
-
Still can't open in CS3 from LR 2.1
I have updated to LR 2.1, re-installed Photoshop CS3, and done some other fiddles that were suggested in various places. But I STILL can't reliably send my files to PS the way you are supposed to. Sometimes when I right-click "Edit in PHotoshop CS3"
-
KeyEvent.consume() problem for BACKSPACE
Hi! I have the following problem - I want to disable the BACKSPACE key input for a JTextArea. I�ve done it like this: private class MyKeyAdapter extends KeyAdapter { public void keyPressed (KeyEvent e) { if (e.getKeyCode()==KeyEvent.VK_BACK_SPACE) e.
-
Purchased an app, got the confirmation and charged but given error in download...no sign of it in 'my stuff'..do I press purchase again? tks