Canon MX 350 Scanning

Hi everyone
I have a Canon MX 350 and, since installing Mountain Lion, find that MP Navigator is not able to open up anymore.
I have downloaded all the latest drivers from Apple and Canon but to no avail.
I have read a few other posts on this topic which seem to be saying that Canon MP Navigator is no longer compatible with Mountain Lion.
Any help on this would be much appreciated.

Hi Mende 1
Just tried that and its fine
Thanks for your help.

Similar Messages

  • How do I use my canon mx432 to scan and email the information?

    How do I use my canon MX432 to scan and send the scanned documents forward on e-mail?

    Hi supercon!
    So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the applications you're trying to scan with.
    Any other details you'd like to give will only help the Community better understand your issue!
    If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
    Thanks and have a great day!

  • How to I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP or Navigator.

    How do I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP Navigator.

    Did you try scanning using Image Capture?
    Otherwise, check the Canon website for updated software.

  • Canon iR2520 Network scan gear

    Hi guys, I face problem with canon iR2520 Network Scan gear. The scanner works from platten glass to scan pages one by one. but it doesn't work from ADF feeder to scan multiple page. it displays "no original in the feeder"
    even if there is paper to scan or sometimes it displays an error "jam in the feeder". please help me I am waiting for your reply.
    Thank you.

    Hi Textefe，
    Thanks for posting in TechNet Forum.
    I agree wiht Rick Dee. To receive better help about Canon, please contact the Canon support.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Canon IJ Network Scanning Utility not showing up in Menu bar

    Hi, I recently performed an erase and install of my Mac. I then used Migration Assistant to restore my data. I have a Canon MP620 Wireless Printer. I noticed that the Canon IJ Network Scanning Utility is not showing up in the menu bar. How do I get it to show up again?
    Message was edited by: Stuart Lawrence

    When installed, the Canon IJ Network Scan Utility is located HD > Library > Printers > Canon > BJPrinters > Utilities. Double click the utility and the icon will appear on the menubar. If you want the utility to start on login, then you can add it to your Login items, located in System Preferences > Accounts.

  • MP Navigator 2.24 is just ok for canon mp530 - better scanning software?

    MP Navigator 2.24 is just ok so I tried 3.04
    I found MP Navigator 3.04 from here
    http://mac.softpedia.com/progDownload/Canon-MP-Navigator-Download-30529.html
    when installed it said could not find correct drivers
    I tried a few but they didn't work
    so I had to delete and go back to MP Navigator 2.24
    http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/pixma_mp_series/pixmamp530#DriversAndSoftware
    From: Canon U.S.A. : Support & Drivers : PIXMA MP530
    Location: http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/pixma_mp_series/pixmamp530#DriversAndSoftware
    Info:
    mp530osxsd12131ej7.dmg
    MP530 Scanner Driver Ver. 12.13.1 (Mac OS X 10.2/10.3/10.4/10.5/10.6)
    Q: Does anyone know how to get v 3.04 working on sno leo?
    Q: Is there better other software that can work with canon mp530 for scanning?

    i think this is what i have with Mp nav 2.2.4... (but didn't work with v3)
    From: Starting download process...
    Location: http://software.canon-europe.com/download.asp
    Info:
    scangearmp53012110.dmg
    and ...
    i see this - but i think it's old from 2007
    Location: http://driverscollection.com/?
    Info:
    Click to download scangearmp530300.dmg
    Message was edited by: revDAVE

  • After update to 10.6.3: Canon MF4320 cannot scan

    After updating to both OS X 10.6.3. and the new Canon printerdrivers from Apples Software Update my *Canon MF4320* cannot scan anymore.
    The option does, however, show up in the menu in +System Prefs/Print & Fax+, but when I click on +"Open Scanner..."+ the window poping up says +"No scanner is selected"+. I've tried to reinstall the drivers from Canons page again, didn't help. I then reinstalled the Apple option, no luck either.
    Now what? I cannot work without this scanner as I'm a journalist.
    Any suggestions and help will therefore be much appreciated.

    Pahu
    I updated to 10.6.3 and the new Canon drivers from Software Update last night. After that, could no longer print wirelessly to Canon MP640. Message said "communication error". I reset the printing system and re-added the printer. Printer works fine wirelessly after that, but now I can no longer add the scanner. The scanner did not show up on the Print/Fax Prefs in System Preferences in Wireless Mode.
    In USB mode, then both printer and scanner functions are available.
    Any thoughts on how I could get the scanner to work wirelessly again?

  • Canon MP600R network scan failed!

    Hi,
    I have a Canon MP600R connected to my wifi network trough the wifi interface.
    Under Leopard Printer and Scanner are working fine even the scan to Mac on the printer directly.
    Now i have upgraded my Macs to Snow Leopard (tested with 10.6 and 10.6.1 but running now 10.6.1) and i easily got the printer working over the network using the SL built-in driver (before and after the Canon driver update).
    For the scanner it's a nightmare!!!!
    Without add-on or Canon driver no way to have the scanner working even trough USB.
    If i add the ScanGear driver 12.13.1 from the Canon Web site supporting 10.6 it works trough USB but no way trough the network : impossible to add the scanner over the network!!!!!!!
    By the way trough USB when you press the Scan to Mac button on the printer you don't need anymore the MP Navigator from Canon, the scan is handle directly trough Image Capture application.
    Could someone help me to add the network scanner on my MP600R ???
    Thanks in advance
    Regards
    Nicolas
    Message was edited by: Nicolas Scheffer

    Hi Nicolas. I managed to find my old MP600R in the storeroom and managed to get it scanning into 10.6.1. Here is the steps.
    Before you start you will need the MP600R Scanner Driver v12.13.1, the Canon IJ Network Tool v2.70 and MP Navigator v3.0.4 application installed on the 10.6 Mac.
    1. Click on the Canon IJ Network Scan Utility icon in the menubar. To me this looks like an art deco chair.
    2. Click on Open Settings. This will open the Canon IJ Network Scan Utility. If the MP600R is not in the list, click Register Scanner.
    3. The Canon IJ Network Scanner Selector application will now appear. Canon MP600R Network should be in the TWAIN Data Source menu and under Network Device List, you should see the MAC address for the MP600R. Click Apply. This will add the MP600R to the IJ Scan Utility list. Click Exit to close the Scanner Selector application.
    4. After closing the Scanner Selector application the Canon IJ Network Scan Utility will be displayed. Click the OK button to add the MP600R.
    5. Now you are ready to scan. However, I could not get Image Capture or Preview to locate the MP600R, which is what I use with my networked MP980. But after installing MP Navigator v3.0.4 and registering the MP600R via the Preferences menu of Navigator, I was able to scan using Navigator and push scan a document from the MP600R.
    Hope this helps you.
    Pahu

  • Uninstall Canon IJ Network Scan Utility

    I recently attempted to install the Canon MX700 over a wired LAN but was unsuccessful. I was so fed up that I decided to uninstall all the software associated with Canon. I still see an icon for the Canon IJ Network Scan Utility in the upper right hand portion of my screen. How can I ensure that all the software associated with Canon is removed?
    Thanks.

    Under System Preferences, System, Accounts, Login Items, I removed the Scan Utility from the list of programs that open automatically when I log in. The program no longer starts but I fear that the program is lingering some where on my computer hard drive.

  • Canon IJ Network Scanning Utility not working

    Hello,
    Since I upgraded my OS to Yosemite, the application "Canon IJ Network Scan Utility.app" is not working anymore.
    When I try to launch it, it first shows in the top menu bar and then disappears. It is located in Macintosh HD ▸ Library ▸ Printers ▸ Canon ▸ BJPrinter ▸ Utilities.
    I cannot use my scanner from the scanner itself any more which is not so convenient when you have a stack of document to scan...
    B.
    Tech. details:
    Yosemite version 10.10.1
    iMac (24-inch Mid 2007)
    Processor: 2.8 GHz Intel Core 2 Duo
    Memory: 4 GB 667 MHz DDR2 SDRAM
    Graphics: ATI Radeon HD 2600 Pro 256 MB

    I have noticed the same issue you are talking about. I have found a workaround to trigger scans from the printer, but it is MUCH less convenient than it was in Mavericks.
    If you install all the latest Yosemite versions of Canon drivers and utilities from canon support site, you should have something called "Canon IJ Network Scanner Selector EX". If you run this, your printer should show as one of the options to select. Select it. There should also be a button labeled: "Scan-from-operation-panel-settings". Click that, and select your printer. If it is already selected, you may have to unselect and then re-select. At the printer, you should then see your mac in the "PC" destination selector.
    With Mavericks, I only had to set this up once, and I could then ALWAYS just go right to the printer to initiate scans. That is, it STAYED connected to my computer: as long as the computer was on, I could just go straight to the printer to start scanning. Now, it seems that the connection somehow gets broken, or the "listener program" on the Mac stops, or something, and you have to go through the above steps again to get it re-connected. It is quite annoying, and much less convenient than it was with Mavericks. I think in my case, it gets "disconnected" every time my computer goes to sleep.
    Hope that helps. If you find a way to keep it connected all the time, I'd appreciate it!

  • How to properly locate and  "Uninstall Canon ij Network Scan Utility"

    I had this same problem so I went thru my computer's specifics.
    If you try doing a spotlight or "find" search for canon, canon lj network utility, etc. you'll only find a "Canon" folder, but it won't necessarily give you the information you're looking for.
    Here's what I did:
    First turn off the "canon ij network scan utility"
    Then:
    1. Click on Finder
    2. Click the Macintosh HD icon (hard drive icon under iDisk)
    3. Click the Library folder (make sure it's the folder with the picture on it, building with columns)
    4. Scroll down to the "Printers" folder
    5. Locate the "Canon" folder, then the "BJPrinter" folder.
    6. Once you installed the "canon ij network scan utility" to your computer, various components will be scattered throughout this "BJPrinter" folder. Click on each folder, and check the "Date Modified" column. Every file within this folder that has a Date Modified similar to the date you installed the program, is a file with a relation to the "canon ij network scan utility." I suggest deleting them all.
    7. If you're looking to make sure you're getting rid of the"canon ij network scan utility," after you click on Macintosh HD>>Library>>Printers>>Canon>>BJPrinter, click on the "Utilities" folder. In this folder you'll find a couple of utilities installed with the "canon ij network scan utility" program, but you'll also find the actual "canon ij network scan utility" program. I suggested dragging the utilities folder to the trash and disposing of it all. Do a "secure empty trash" if necessary. It may not empty right away since you still had it on the top right, so restart your computer then try to empty the trash when everything reboots.
    Hope this helps.

    Under System Preferences, System, Accounts, Login Items, I removed the Scan Utility from the list of programs that open automatically when I log in. The program no longer starts but I fear that the program is lingering some where on my computer hard drive.

  • How to get a Canon MF4150 to scan

    I've recently moved from a PC to Mac. Canon provides print and fax drivers for Macs for my laser multi-function Canon MF4150. But not a driver for scanning, and they say they don't have any plans to produce one (in spite of the fact that they still are selling this model and don't say anything about Mac functionality being limited).
    Is it really true that it is impossible for me to use the scanner on this machine? (It has a feeder and on the PC one could easily scan in multiple pages and save as a single pdf file.) Are there other drivers or workarounds that might enable me to be able to use the scanner? Canon hasn't responded to my last query about this.
    Many thanks to anyone who understands this better than I do.

    You may find third party scanner drivers help with that scanner. I've listed a few such solutions on my FAQ*:
    http://www.macmaps.com/macosxnative.html#SCANNER
    Also if you run a Windows virtualization program, you may find that scanner drivers work in such a program on the Mac*:
    http://www.macmaps.com/macosxnative.html#WINTEL
    Both may offer solutions not provided by the manufacturer.
    - * Links to my pages may give me compensation.

  • Canon DR-9050C scanning. Constant crashes.

    Have latest Canon drivers installed. Tried uninstalling and reinstalling Canon drivers. Tried uninstalling and reinstalling Acrobat. Tried on 2 separate computers (one with Windows 7, one with Windows 8) with same results. Cleaned out MSCONFIG startup items. Tried disabling Antivirus. Tried installed a different antivirus. Tried scanning with Nitro Pro 9 trial version - Nitro scans perfectly with no crashes over the 14 day trial period.
    This is a high speed scanner in a law firm, and they are extremely frustrated with the crashes.
    Here is a crash report from Event Viewer on a Windows 7 Pro computer:
    Faulting application name: Acrobat.exe, version: 11.0.10.32, time stamp: 0x547e97af
    Faulting module name: Acrobat.dll, version: 11.0.10.32, time stamp: 0x547e9795
    Exception code: 0xc0000005
    Fault offset: 0x0017f889
    Faulting process id: 0xec4
    Faulting application start time: 0x01d050664b93f7b5
    Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll
    Report Id: 58d3babf-bc65-11e4-bba6-9cd21e65f400

    Problem Solved!  I removed the Accessibility.api plugin from Acrobat and now my scanner and Acrobat is back to working normal with no crashes.  AND with my Wacom tablet installed and running.  So something about the accessibility screen reader part and the Wacom tablet don't like each other.
    I disabled the accessibility option plugin as this other member posted:
    "If you are trying to disable a plug-in the preferred method is to crate a new subdirectory under the Acrobat application, like "optional" or "disabled" and move the api plug-in file you want to disable to that folder. This keeps the name and extension standard and easily allows one to renable the API. But this process has to be done to each user's system and does not allow selectively turning it on or off. "

  • Canon MP620 Printing, Scanning, FireWall blocking

    After updating to 10.6.7, my Macbook Pro was prompting to allow the networked "MP620" inbound access through the firewall.  It did this every time that I printed.  The truth is that MP Navigator had had similar problems when I scanned for a while, but I do not scan that much, so it was just an annoyance.
    I looked at the firewall and security settings, and all of the relevant software were set to allow incoming connections. I recreated the printer definition too, but none of that helped.
    Finally, I went back into the firewall's advanced settings, and deleted any reference to Canon software, including MP Navigator, and then restarted and clicked "allow" when prompted for the by the Scan Utility and MP Navigator.  That is the fix.
    Some of the software, such as the Canon Printer Utility, never reappeared in the firewall list, making me suspect that the current version is signed, whereas an older version was not. 
    When software that is referenced in the firewall list is upgraded, it seems to be best to delete references to it out of the list and then reauthorize it.

    I found the same solution when testing for the OP in this post. As we both have surmised, it appears that the new Canon printer driver set is signed and no longer needs to be listed as allowed applications. It would have been nice if this was mentioned with the driver update...

  • Canon Mx310 failed scanning message

    Have not been able to scan documents from cannon mx310 since installing snow leopard. When scan button pressed a failed scan message appears and then it returns to previous screen.

    You need to ensure you have the following software and scanner driver installed.
    *ICA Driver*
    http://support-au.canon.com.au/contents/AU/EN/0100213301.html
    *MX310 Scanner Driver*
    http://support-au.canon.com.au/contents/AU/EN/0100008601.html

Maybe you are looking for