Canon MX 870 printjob mgr failed for everything
Hello,
I recently upgraded to Snow Leopard hoping I will then upgrade to Lion. However, now my printer will not print. It recoginzes that something has been sent to the printer but will not print by saying that printjob mgr failed. Using a flash drive I tried to print the files directly from the printer and it states that the files are too big. It does not matter if the format is .pages, .numbers or .pdf. The same message is displayed for everything.
I uninstalled all the pdf updates and the acrobat but it did not help. I uninstalled and reinstalled the driver for the printer and it did not help. I tried to search for the disk utility repair but could not locate that either(as suggested by a post from 2009). I am now lost. I am not sure what to do. Can someone help me please?
Thank you in advance for your help!
If you haven't done so already, try resetting the printing system.
How to Reset the Printing System
Open System Preferences > Print & Scan/Fax
Move your mouse over the Printers list
Hold down the Control button and click the mouse
Click the "Reset printing system ..." popup
Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.
Similar Messages
-
iTunes wont download to my laptop,its an MSI and has windows 7, its works for everything else. Please help
Do you get an error message when you try to download iTunes? If so, what does it say? (Precise text, please.)
-
I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIAHi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome. -
Portmap translation creation failed for udp src inside dst inside
Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicyHello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.126 4250
0.0.0.0 0.0.0.0 On-link 192.168.1.240 21
80.51.24.22 255.255.255.255 192.168.2.1 192.168.2.126 4251
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
169.254.0.0 255.255.0.0 On-link 192.168.2.126 4506
169.254.104.126 255.255.255.255 On-link 192.168.2.126 4506
169.254.255.255 255.255.255.255 On-link 192.168.2.126 4506
192.168.1.240 255.255.255.255 On-link 192.168.1.240 276
192.168.2.0 255.255.255.0 On-link 192.168.2.126 4506
192.168.2.126 255.255.255.255 On-link 192.168.2.126 4506
192.168.2.255 255.255.255.255 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 192.168.1.240 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.2.126 4506
255.255.255.255 255.255.255.255 On-link 192.168.1.240 276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz -
Reports successfully execute but generate a login failed for user 'sa' err
I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation. -
Login failed for user 'IIS APPPOOL\DefaultAppPool' on SQL Express 2012
I am new to both ASP.NET and SQL Server.
I have IIS8 installed on my Windows 8 PC, together with SQL Server Express 2012. Given my ignorance, I have just set everything up using default values.
I have a very small web site set up in its own folder and set up in IIS 8 as a virtual folder under the default web site. I have also set up a very simple database called 'StockControl' via SSMS, which contains one table called 'Colours' which has two columns.
One page in the website is a simple ASP.NET form which runs on localhost without any problems.
On the second page in the website I added a GridView ASP.NET control, letting Expression Web 4 generate the connection string and place it in a web.config file. I tested the SQL query and the connection as I went along and both came back as successful. So
far, so good.However, when I try to run the page in the browser I get the error message:
Server Error in '/' Application.
Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.]
I have spent two days trying to find out what I have done wrong and even uninstalled and re-installed SQL Server just in case i'd totally messed up and corrupted the database.
I would really appreciate some help please.I changed the IIS default identity to NetworkService and got this error instead
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
An attempt to attach an auto-named database for file C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
There is nothing running that is using the database.
I have also set a login up for the Apppool and set the user mapping to the database but the problem persists,
What is so infuriating is that a week ago I had several pages in this website that displayed, inserted, updated and deleted records on this database using ADO as well as ASP.NET running just fine. Then this problem came out of nowhere. -
How to fix Login failed for user ''. (Microsoft SQL Server, Error: 18456)in windows 2008?
Hi All,
we are facing the Login fails issue .
how to resolve the bellow error , could you please suggested the possible ways .. ASAP
TITLE: Connect to Server
Cannot connect to ..
ADDITIONAL INFORMATION:
Login failed for user ' domain\name'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
BUTTONS:
OK
Log Name: Application
Source: MSSQLSERVER
Date: 10/6/2011 1:56:28 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: domain\name
Computer:
Description:
Login failed for user ' domain\name'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
RAMI was hitting myself in the head with this problem for a couple of minutes.... Everything was fine on the DC and Domain itself.. I added the Domain admins Group Principal for which I am part of... I was getting this error ... Long History... Short
(Right Click and Run as Administrator took care of this for me..) UAC was the cause of the problem.
Cannot connect to XX-DB-XX3.
===================================
Login failed for user 'XXXXS\XXas'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
Server Name: XX-DB-XX3
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() -
CLUVFY failing with 'User Equivalence check failed for...'
New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
Running the cluster verification utility command:
cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
Verifying system requirement
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
1) RSA keys correctly configured on both nodes and I can ssh between without a password
2) ping ip and private work correctly to and from both nodes.
3) user, group ids are identical on both systems.
I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
Checking node reachability...
Check: Node reachability from node "node-01"
Destination Node Reachable?
node-02 yes
node-01 yes
Result: Node reachability check passed from node "node-01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node-02 passed
node-01 failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
node-01
Verification will proceed with nodes:
node-02
Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.No, no banners. And I followed note 300548.1 to the letter. Several times :-)
However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
According to the documentation:
CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out. -
Query execution failed for dataset
I have a problem in SSRS with MDX.
Problem Statement: Query execution failed for dataset 'ds_ex' on Production server.
Not able to reproduce this error in Dev machine.
Problem
Desc:
When I select few values from drop down list it is throwing this error. and for combinations it is working.
Thought of data issue, checked in cube, local RDL everything is fine.Hi Vamshi,
According to the information, it's hard to determine the root case for this issue. So, please help to collect more log information while the issue happened. Please refer to the article below:
Reporting Services Execution and Trace Logging:
http://technet.microsoft.com/en-us/library/ms157403.aspx
In additon, I would suggest you to check the "Report Execution Timeout" in the article below:
Processing Options Properties Page (Report Manager):
http://technet.microsoft.com/en-us/library/ms178821.aspx
Troubleshooting Timeout errors in Reporting Services:
http://blogs.msdn.com/b/mariae/archive/2009/09/24/troubleshooting-timeout-errors-in-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support -
Hello,
I have 2 SQL Server 2008 R2 machines that are configured with database mirroring (using certificates as authentication), there is no witness configured. My issue is that the mirror server is receiving at least one of the below pared messages every
second and filling up my sql error log quickly.
SYSTEM is the service account user for the MSSQLSERVER service.
[298] SQLServer Error: 4060, Cannot open database "<databasename>" requested by the login. The login failed. [SQLSTATE 42000]
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\SYSTEM'. [SQLSTATE 28000]
The database has a status of: Affected database state is: Mirror, Synchronized/Restoring...
When I checking the database mirror monitor, it shows that its mirroring ok and everything has green checkboxes.
Is there a way to stop all these errors being logged, I'm assuming this isn't normal.
MarcusYes i have faced the same issues and tried everything and nothing was using this account, system was ended up with creating few GB's sql error log files everday.. and finally i had two options, 1 -- Rebuild the instance completely 2. Change the SQL Server
Audit settings to Only successful logins and restart the instance.. ( May be your current sql server level Audit setting is set to Failed & Successful logins..
Remeber my server was a DR so I have changed the SQL Server Audit settings to only Successful logins.. but production servers we will monitor both... :)
Raju Rasagounder Sr MSSQL DBA -
Aleatory One factory fails for the operation "encode"-JPEG
I've a very strange problem with JAI.write using JPEG, but is happening aleatory. Some times it works, some times I get the exception and some other times don't. What I've seen is that when I got first this error, then all the rest of the images throws it. I mean, I'm working OK and then I got the exception, from there, all the images, no matter that they were not trowing exceptions before, now they do, so I don't know what is happening. I'll post some code snippets and the full stack trace of the exception. Hope you can help me:
First, I have a class that is a JSP-Tag:
RenderedOp outputImage = JAI.create("fileload", imgFile.getAbsolutePath());
int widthSize = outputImage.getWidth();
int heightSize = outputImage.getHeight();
try{
outputImage.dispose();
}catch(Exception e){}
outputImage = null;That's the first thing, now, the second, this is a Servlet that writes the image to the browser (GetImageServlet its name, which appears in the stack trace):
FileSeekableStream fss = new FileSeekableStream(file);
RenderedOp outputImage = JAI.create("stream", fss);
int widthSize = outputImage.getWidth();
int heightSize = outputImage.getHeight();
if ((outputImage.getWidth() > 0) && (outputImage.getHeight() > 0)) {
if ((isThumbnail) && ((outputImage.getWidth() > 60) || (outputImage.getHeight() > 60))) {
outputImage = ImageManagerJAI.thumbnail(outputImage, 60);
} else if (outputRotate != 0) {
outputImage = ImageManagerJAI.rotate(outputImage, outputRotate);
OutputStream os = resp.getOutputStream();
resp.setContentType("image/jpeg");
ImageManagerJAI.writeResult(os, outputImage, "JPEG");
outputImage.dispose();
os.flush();
os.close();
outputImage = null;
imgFile = null;The code of ImageManagerJAI.writeResult, which is a method I use above:
public static void writeResult(OutputStream os, RenderedOp image, String type) throws IOException {
if ("GIF".equals(type)) {
GifEncoder encoder = new GifEncoder(image.getAsBufferedImage(), os);
encoder.encode();
} else {
JAI.create("encode", image, os, type, null);
}And the full exception trace is:
Error: One factory fails for the operation "encode"
Occurs in: javax.media.jai.ThreadSafeOperationRegistry
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
at javax.media.jai.JAI.createNS(JAI.java:1099)
at javax.media.jai.JAI.create(JAI.java:973)
at javax.media.jai.JAI.create(JAI.java:1668)
at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
at GetImageServlet.doGet(GetImageServlet.java:214)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
... 32 more
javax.media.jai.util.ImagingException: All factories fail for the operation "encode"
at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1687)
at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
at javax.media.jai.JAI.createNS(JAI.java:1099)
at javax.media.jai.JAI.create(JAI.java:973)
at javax.media.jai.JAI.create(JAI.java:1668)
at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
at GetImageServlet.doGet(GetImageServlet.java:214)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
... 26 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
... 32 more
Caused by:
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
at javax.media.jai.JAI.createNS(JAI.java:1099)
at javax.media.jai.JAI.create(JAI.java:973)
at javax.media.jai.JAI.create(JAI.java:1668)
at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
at GetImageServlet.doGet(GetImageServlet.java:214)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
... 32 moreI'm using JDK 1.6, Tomcat 5.5, Windows XP, and JAI 1.1.2_01 (the jars are in the WEB-INF/lib of the project AND in the jdk 6/jre/lib/ext, while the dlls are only on jdk 6/jre/bin)
Please help, I don't know what to do, I've weeks with this problem. Dukes available pleaseeee!Hi
you can check if you get in the error logs an message like 'Could not load mediaLib accelerator wrapper classes. Continuing in pure Java mode.' may be the problem of JAI native accelerator -
Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received Error Code: U43M1D207. Any suggestions?
Download the Fireworks updater from here:
https://www.adobe.com/support/fireworks/downloads_updaters.html
When you have downloaded and extracted the file right click and then click "run as Adminstrator".
It should work for you. I had the same issue and did this and everything worked, -
Role Provisioning failed for System(s) : Connector Name . Error Message : malformedRequest
Hi Everyone we are facing following issue in GRC-SAC-SAE 5.3_16.3. So far our CUP was connected to Enterprize portal (7.01) and auto provisioning for group to users worked. However now it is not working with below error.
Role Provisioning failed for System(s) : <Connector Name>. Error Message :
malformedRequest
Failed request now
Successful request used to provision
Regards,
Arpan PaikArpan,
We used to get those "malformed request" errors. We dealt with them by requesting the portal to be re-booted during the weekend maintenance window, making the portal security changes manually, cancelling the CUP request and notifying the requester. It's not a great solution, I know, but it was all we could come up with at the time. Then they upgraded the portal to NW 7.31, which is incompatible with GRC 5.3, and we have to do everything manually, so our situation went from bad to worse. Good luck!
Cheers,
Gretchen -
CONC-SM TNS FAIL Call to PingProcess failed for IEMDPDEV
Concurrent manager internal log file showing error CONC-SM TNS FAIL Call to PingProcess failed for IEMDPDEV after application startup and showing status "System Hold or Fix Manager" in system administrator> administer. When ICM Fixed from administer Concurrent manager its start works and no error found in manager log file.
We have a RAC based environment and getting cold backup of application & database everyday after a shutdown of application and database.
This is our production environment we only face this issue in our production environment and no recent changes made or patch applied on environment.
Internal manager log file
Shutting down Internal Concurrent Manager : 13-OCT-2014 01:31:32
13-OCT-2014 01:31:32
The ICM has lost its database connection and is shutting down.
Spawning reviver process to restart the ICM when the database becomes available again.
Spawned reviver process 30597.
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-03114: not connected
to ORACLE
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPSMG encountered an ORACLE error. ORA-03114: not connected
to ORACLE
Review your error messages for the cause of the error. (=<POINTER>)
_ 3 _
Routine FDPCRQ encountered an ORACLE error. ORA-03113: end-of-file on
communication channel
Review your error messages for the cause of the error. (=<POINTER>)
APP-FND-01388: Cannot read value for profile option FND_MGR_STRTUP_THRES_TIME in routine &ROUTINE.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The PROD_1004@PROD internal concurrent manager has terminated with status 1 - giving up.
========================================================================
Starting PROD_1004@PROD Internal Concurrent Manager -- shell process ID 8210
logfile=/u01/oracle/inst/apps/PROD_prodapps/logs/appl/conc/log/PROD_1004.mgr
PRINTER=noprint
mailto=oracle
restart=N
diag=N
sleep=30
pmon=4
quesiz=1
Reviver is ENABLED
+---------------------------------------------------------------------------+
Application Object Library: Concurrent Processing version 11.5
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Internal Concurrent Manager started : 13-OCT-2014 08:02:25
+---------------------------------------------------------------------------+
Process monitor session started : 13-OCT-2014 08:02:25
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
13-OCT-2014 08:02:26 - Node:(PRODAPPS), Service Manager:(FNDSM_PRODAPPS_PROD) currently unreachable by TNS
Process monitor session ended : 13-OCT-2014 08:02:26
Process monitor session started : 13-OCT-2014 08:04:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:04:26
Process monitor session started : 13-OCT-2014 08:06:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:06:26
Process monitor session started : 13-OCT-2014 08:08:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:08:26
Process monitor session started : 13-OCT-2014 08:10:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:10:26
Process monitor session started : 13-OCT-2014 08:12:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:12:26
Process monitor session started : 13-OCT-2014 08:14:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:14:26
Process monitor session started : 13-OCT-2014 08:16:26
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:16:27
Process monitor session started : 13-OCT-2014 08:18:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:18:27
Process monitor session started : 13-OCT-2014 08:20:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:20:27
Process monitor session started : 13-OCT-2014 08:22:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:22:27
Process monitor session started : 13-OCT-2014 08:24:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:24:27
Process monitor session started : 13-OCT-2014 08:26:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:26:27
Process monitor session started : 13-OCT-2014 08:28:27
CONC-SM TNS FAIL
Call to PingProcess failed for IEMDPDEV
Process monitor session ended : 13-OCT-2014 08:28:27
Process monitor session started : 13-OCT-2014 08:30:27
Process monitor session ended : 13-OCT-2014 08:30:28
Process monitor session started : 13-OCT-2014 08:32:28
Process monitor session ended : 13-OCT-2014 08:32:28
Process monitor session started : 13-OCT-2014 08:34:28
Process monitor session ended : 13-OCT-2014 08:34:28
Process monitor session started : 13-OCT-2014 08:36:28
Process monitor session ended : 13-OCT-2014 08:36:28
Process monitor session started : 13-OCT-2014 08:38:28
Process monitor session ended : 13-OCT-2014 08:38:28
Process monitor session started : 13-OCT-2014 08:40:28
Process monitor session ended : 13-OCT-2014 08:40:28
Process monitor session started : 13-OCT-2014 08:42:28
Process monitor session ended : 13-OCT-2014 08:42:28
Process monitor session started : 13-OCT-2014 08:44:28
Process monitor session ended : 13-OCT-2014 08:44:28
Process monitor session started : 13-OCT-2014 08:46:28
Process monitor session ended : 13-OCT-2014 08:46:28
Process monitor session started : 13-OCT-2014 08:48:28
Process monitor session ended : 13-OCT-2014 08:48:29
Process monitor session started : 13-OCT-2014 08:50:29
Process monitor session ended : 13-OCT-2014 08:50:29
Process monitor session started : 13-OCT-2014 08:52:29
Process monitor session ended : 13-OCT-2014 08:52:29
Process monitor session started : 13-OCT-2014 08:54:29
Process monitor session ended : 13-OCT-2014 08:54:29
Process monitor session started : 13-OCT-2014 08:56:29
Process monitor session ended : 13-OCT-2014 08:56:29
Process monitor session started : 13-OCT-2014 08:58:29
Process monitor session ended : 13-OCT-2014 08:58:29
Process monitor session started : 13-OCT-2014 09:00:29
Process monitor session ended : 13-OCT-2014 09:00:29
Process monitor session started : 13-OCT-2014 09:02:29
Process monitor session ended : 13-OCT-2014 09:02:29
Process monitor session started : 13-OCT-2014 09:04:29
Process monitor session ended : 13-OCT-2014 09:04:29
Process monitor session started : 13-OCT-2014 09:06:29
Process monitor session ended : 13-OCT-2014 09:06:30
Process monitor session started : 13-OCT-2014 09:08:30
Process monitor session ended : 13-OCT-2014 09:08:30
Process monitor session started : 13-OCT-2014 09:10:30
Process monitor session ended : 13-OCT-2014 09:10:30
Process monitor session started : 13-OCT-2014 09:12:30
Process monitor session ended : 13-OCT-2014 09:12:30
Process monitor session started : 13-OCT-2014 09:14:30
Process monitor session ended : 13-OCT-2014 09:14:30
Process monitor session started : 13-OCT-2014 09:16:30
Process monitor session ended : 13-OCT-2014 09:16:30
Process monitor session started : 13-OCT-2014 09:18:30
Process monitor session ended : 13-OCT-2014 09:18:30
Process monitor session started : 13-OCT-2014 09:20:30
Process monitor session ended : 13-OCT-2014 09:20:30
Process monitor session started : 13-OCT-2014 09:22:30
Process monitor session ended : 13-OCT-2014 09:22:30
Process monitor session started : 13-OCT-2014 09:24:30
Process monitor session ended : 13-OCT-2014 09:24:30
Process monitor session started : 13-OCT-2014 09:26:30
Process monitor session ended : 13-OCT-2014 09:26:30
Process monitor session started : 13-OCT-2014 09:28:30
Process monitor session ended : 13-OCT-2014 09:28:30
Process monitor session started : 13-OCT-2014 09:30:30
Process monitor session ended : 13-OCT-2014 09:30:31
Process monitor session started : 13-OCT-2014 09:32:31
Process monitor session ended : 13-OCT-2014 09:32:31
Process monitor session started : 13-OCT-2014 09:34:31
Process monitor session ended : 13-OCT-2014 09:34:31
Process monitor session started : 13-OCT-2014 09:36:31
Process monitor session ended : 13-OCT-2014 09:36:31
13-OCT-2014 09:38:31
Request : 1393181
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:31
Starting FNDCRM Concurrent Manager : 13-OCT-2014 09:38:31
Process monitor session ended : 13-OCT-2014 09:38:31
13-OCT-2014 09:38:31
Request : 1393182
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:31
Starting FNDCRM Concurrent Manager : 13-OCT-2014 09:38:31
Starting AMSDMIN Concurrent Manager : 13-OCT-2014 09:38:31
Process monitor session ended : 13-OCT-2014 09:38:31
13-OCT-2014 09:38:31
Request : 1393183
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:31
Starting C_AQCT_SVC Concurrent Manager : 13-OCT-2014 09:38:31
Process monitor session ended : 13-OCT-2014 09:38:32
13-OCT-2014 09:38:32
Request : 1393184
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:32
Starting DownloadProcessorMigrationMode Concurrent Manager : 13-OCT-2014 09:38:32
Process monitor session ended : 13-OCT-2014 09:38:32
13-OCT-2014 09:38:32
Request : 1393185
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:32
Process monitor session ended : 13-OCT-2014 09:38:32
13-OCT-2014 09:38:32
Request : 1393186
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:32
Found dead process: spid=(10691), cpid=(282513), ORA pid=(39), manager=(0/4)
Found dead process: spid=(10694), cpid=(282514), ORA pid=(40), manager=(0/4)
Starting FFTM Concurrent Manager : 13-OCT-2014 09:38:32
Starting FNDCRM Concurrent Manager : 13-OCT-2014 09:38:32
Process monitor session ended : 13-OCT-2014 09:38:32
13-OCT-2014 09:38:32
Request : 1393187
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:32
Starting FFTM Concurrent Manager : 13-OCT-2014 09:38:32
Starting FNDCPOPP Concurrent Manager : 13-OCT-2014 09:38:32
Process monitor session ended : 13-OCT-2014 09:38:32
13-OCT-2014 09:38:32
Request : 1393188
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting FTE_TXN_MANAGER Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393189
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting IEU_SH_CS Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393190
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting IEU_WL_CS Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393191
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting INVMGR Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393192
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting INVTMRPM Concurrent Manager : 13-OCT-2014 09:38:33
Starting INVMGR Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393193
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting INVTMRPM Concurrent Manager : 13-OCT-2014 09:38:33
Starting OAMCOLMGR Concurrent Manager : 13-OCT-2014 09:38:33
Process monitor session ended : 13-OCT-2014 09:38:33
13-OCT-2014 09:38:33
Request : 1393194
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:33
Starting OAMGCS_PRODAPPS Concurrent Manager : 13-OCT-2014 09:38:34
Process monitor session ended : 13-OCT-2014 09:38:34
13-OCT-2014 09:38:34
Request : 1393195
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:34
Starting PASMGR Concurrent Manager : 13-OCT-2014 09:38:34
Process monitor session ended : 13-OCT-2014 09:38:34
13-OCT-2014 09:38:34
Request : 1393196
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:34
Starting PODAMGR Concurrent Manager : 13-OCT-2014 09:38:34
Starting PASMGR Concurrent Manager : 13-OCT-2014 09:38:34
Process monitor session ended : 13-OCT-2014 09:38:34
13-OCT-2014 09:38:34
Request : 1393197
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:34
Starting RCVOLTM Concurrent Manager : 13-OCT-2014 09:38:34
Starting PODAMGR Concurrent Manager : 13-OCT-2014 09:38:34
Process monitor session ended : 13-OCT-2014 09:38:34
13-OCT-2014 09:38:34
Request : 1393198
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:34
Starting RCVOLTM Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Process monitor session ended : 13-OCT-2014 09:38:34
13-OCT-2014 09:38:34
Request : 1393199
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:34
Starting WFALSNRSVC Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:34
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Starting STANDARD Concurrent Manager : 13-OCT-2014 09:38:35
Process monitor session ended : 13-OCT-2014 09:38:35
13-OCT-2014 09:38:35
Request : 1393200
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:35
Starting WFMLRSVC Concurrent Manager : 13-OCT-2014 09:38:35
Process monitor session ended : 13-OCT-2014 09:38:35
13-OCT-2014 09:38:35
Request : 1393201
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:35
Starting WFWSSVC Concurrent Manager : 13-OCT-2014 09:38:35
Process monitor session ended : 13-OCT-2014 09:38:35
13-OCT-2014 09:38:35
Request : 1393202
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 13-OCT-2014 09:38:35
Starting WMSTAMGR Concurrent Manager : 13-OCT-2014 09:38:35
Process monitor session ended : 13-OCT-2014 09:38:35
Process monitor session started : 13-OCT-2014 09:40:05
Process monitor session ended : 13-OCT-2014 09:40:05
Process monitor session started : 13-OCT-2014 09:42:05
Regards
UsmanBelow is the solution provide by the SR Team its works perfectly our enviorment.
Please perform the following steps:
1. Stop all middle tier services including the concurrent managers. Make sure no FNDLIBR, FNDSM, or other dead processes are running.
(restart application and database OS (i have done this step additionally))
2. Stop and then restart the database.
3. Connect to SQLPLUS as APPS user and run the following :
EXEC FND_CONC_CLONE.SETUP_CLEAN;
COMMIT;
EXIT;
4. Reference Note.260887.1 regarding the Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES.
5.. Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers and Web tiers to repopulate the required system tables.
6. Connect to SQLPLUS as APPS user and run the following statement :
select CONCURRENT_QUEUE_NAME
from FND_CONCURRENT_QUEUES
where CONCURRENT_QUEUE_NAME like 'FNDSM%';
If the above SQL does not return any value please do the following:
cd $FND_TOP/patch/115/sql
Connect to SQLPLUS as APPS user and run the following script :
SQL> @afdcm037.sql;
Reference Note 218893.1 How to Create The Service Manager 'FNDSM' on Oracle Applications
to create libraries for FNDSM and create managers for preexisting nodes.
Check again that FNDSM entries now exist:
select CONCURRENT_QUEUE_NAME
from FND_CONCURRENT_QUEUES
where CONCURRENT_QUEUE_NAME like 'FNDSM%';
7. Please run the Concurrent Manager Recovery feature to address any Concurrent Manager / Concurrent Processing issues within the Oracle Application Manager.
8. Start the middle tier services including your concurrent manager.
9. Retest the issue.
Regards
Usman -
Error:AIP-18506: Configuration Builder rollback failed for configurations n
Hi All
While creating a deployement , i am getting below error,
please help me
Error:AIP-18506: Configuration Builder rollback failed for configurations null for business process null
regards
suniHi Anuj,
Thanks for your response, Now i getting a new error.
I am getting the below error, while i am deploying the configurations.
AIP-11016:SQL
please find the below errors
2009.07.29 at 06:38:54:371: B2BStarter thread: B2B - (DEBUG) B2BStarter - Current list is empty. Shutdown B2B
2009.07.29 at 06:38:54:372: B2BStarter thread: B2B - (DEBUG) B2BStarter - Shutdown B2B
2009.07.29 at 06:38:54:405: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Enter
2009.07.29 at 06:38:54:407: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Exit
2009.07.29 at 06:38:54:409: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown B2B server start
2009.07.29 at 06:38:54:464: Thread-18: BusinessLogicLayer - (ERROR) caught error: Closed Connection
2009.07.29 at 06:38:54:468: Thread-18: IP - (ERROR) java.sql.SQLException: Closed Connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1259)
at oracle.jdbc.OracleConnectionWrapper.rollback(OracleConnectionWrapper.java:90)
at oracle.tip.repos.core.driver.CatalogDriver.disconnect(CatalogDriver.java:1662)
at oracle.tip.repos.core.persistency.PersistencyService.disconnect(PersistencyService.java:578)
at oracle.tip.buslogic.common.ExecutionContextImpl.disconnectService(ExecutionContextImpl.java:602)
at oracle.tip.buslogic.common.ExecutionContextManager.closeLongRunningContext(ExecutionContextManager.java:511)
at oracle.tip.adapter.b2b.data.B2BExecutionContext.close(B2BExecutionContext.java:208)
at oracle.tip.adapter.b2b.data.DBContext.shutdown(DBContext.java:141)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:455)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:54:469: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end ignore exception
2009.07.29 at 06:38:54:471: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end
2009.07.29 at 06:38:55:426: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown Transport and App Transport
2009.07.29 at 06:38:55:428: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B Server shutdown
2009.07.29 at 06:40:25:439: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2009.07.29 at 06:40:25:573: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2009.07.29 at 06:40:25:767: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2009.07.29 at 06:40:25:873: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2009.07.29 at 06:40:26:079: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2009.07.29 at 06:40:26:149: B2BStarter thread: B2B - (DEBUG) XEngine is already started. So clear cached objects inside XEngine.
2009.07.29 at 06:40:26:181: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2009.07.29 at 06:40:26:185: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2009.07.29 at 06:40:26:189: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2009.07.29 at 06:40:26:195: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2009.07.29 at 06:40:26:198: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] EDI X12 over Generic Exchange
2009.07.29 at 06:40:26:204: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] RosettaNet over RNIF
2009.07.29 at 06:40:26:208: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2009.07.29 at 06:40:26:213: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2009.07.29 at 06:40:26:218: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2009.07.29 at 06:40:26:222: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2009.07.29 at 06:40:26:227: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over ebMS
2009.07.29 at 06:40:26:233: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over Internet
2009.07.29 at 06:40:26:239: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2009.07.29 at 06:40:26:245: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2009.07.29 at 06:40:26:690: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2009.07.29 at 06:40:27:125: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2009.07.29 at 06:40:27:126: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2009.07.29 at 06:40:27:130: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2009.07.29 at 06:40:27:133: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2009.07.29 at 06:40:27:135: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2009.07.29 at 06:40:27:137: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2009.07.29 at 06:40:27:141: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2009.07.29 at 06:40:27:143: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2009.07.29 at 06:40:27:145: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2009.07.29 at 06:40:27:148: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2009.07.29 at 06:40:27:150: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = DEBUG
2009.07.29 at 06:40:27:304: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
2009.07.29 at 06:40:27:309: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost transport_callout_waittime = 30
port = 12001
PROTOCOL_ENDPOINT = null
2009.07.29 at 06:40:27:320: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Test_AS2_TransportServer < http > < Emerson >]
2009.07.29 at 06:40:27:797: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2009.07.29 at 06:40:27:865: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2009.07.29 at 06:40:27:869: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2009.07.29 at 06:40:27:875: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2009.07.29 at 06:40:27:879: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2009.07.29 at 06:40:27:883: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2009.07.29 at 06:40:29:214: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2009.07.29 at 06:40:29:297: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2009.07.29 at 06:40:29:380: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
UI LOG:
2009.07.29 at 04:54:58:859: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:06:010: Thread-46: Repository - (ERROR) Error -: AIP-11015: Object does not exist 629FF62EB2D55C7BE04400144F873925-27-1-30
at oracle.tip.repos.core.driver.CatalogDriver.getObject(CatalogDriver.java:759)
at oracle.tip.repos.core.driver.AssociationList.get(AssociationList.java:70)
at oracle.tip.buslogic.validation.rules.TradingPartnerCollectionRules.rule7_2(TradingPartnerCollectionRules.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1349)
at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1325)
at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validate(ModelValidationEngineImpl.java:1212)
at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjects(ModelValidationEngineImpl.java:296)
at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjectsAgreement(ModelValidationEngineImpl.java:272)
at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:492)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:56:895: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:05:932: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02431: cannot disable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 107
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
at oracle.tip.repos.purge.PurgeManager.disableConstraints(PurgeManager.java:706)
at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:836)
at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:927: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
at oracle.tip.repos.purge.PurgeManager.enableConstraints(PurgeManager.java:728)
at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:870)
at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:931: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: Purge op failed
2009.07.29 at 06:41:07:933: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: PurgeManager failed: Error -: AIP-11016: SQL error: java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
2009.07.29 at 06:46:50:646: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
at java.lang.Thread.run(Thread.java:534)
Maybe you are looking for
-
64-bit Windows 7 Pro's Windows XP Mode, Palm Desktop 4.1.4 sync with Palm Vx?
I last talked about Palm Desktop compatibility with 64-bit Windows at http://forums.palm.com/palm/board/message?board.id=software&message.id=37767. Fortunately, I haven't replaced my laptop yet, so I am in the enviable(?) position of planning the ac
-
Mozilla identifies the download suitable for my laptop, but then nothing happens when I click on the download button
-
How to Upgrade Solaris Package ?
Hi, I created a solais package (*.pkg), which I've installed with the following command: "pkgadd -d mypkg.pkg" 1. What command should I use in order to upgrade it to a higher version? 2. What are the changes I have to do in the installation pkg for s
-
Hi all, The chart of accounts CAIN has the following excise related GL accounts: 24820000 CENVAT Input BED 24920000 PLA on Hold 13113920 Cenvat Clearing 24880000 PLA BED 24930000 Cenvat on Hold 13113910 Cenvat Suspense 24920000 PLA on Hold 13113930 C
-
Tutorial that worked now complains "user not found"
Hi, again. Sorry for another "newbie" problem, but the tutorial database that was running last night (thank you, Marc and Stephen) now gives the following error at "Run": 891 INFO [main] kodo.jdbc.JDBC - Using dictionary class "kodo.jdbc.sql.HSQLDict