Canon MX310 Printing two copies when I only want one
Hello-
Whenever I print a document to the Canon printer, via printer sharing on my network, it prints two copies. Number of copies is always set to 1, but it prints two.
It's crazy! Any ideas?
Thank you
I would suspect that it is something in the printer sharing, like two computers set to share it, and so the print job is sent to both of them. But you should try the usual suspects: Turn off printer sharing, reset the printing system on all computers, then add the printer on the sharing computer, turn on printer sharing on it, and then see if it still happens.
Similar Messages
-
Printing several copies when we only want only one.from SAP to UNIX.
Hi, we have a problem when printing from sap to unix queue.....
There is a program in abap that only indicates to send one printing .. but in unix we see that the queue sends sometimes 3, 4, 5 or two copies of the same printing.
do you know if there is a note in SAP that can solve this issue?
a test: when we send only one copy from sap (spad - sp01), in unix we saw 5:
u2665$ while true
> do
> lpstat TEST1022
> sleep 1
> done
no entries
no entries
no entries
no entries
TEST1022-767 USER1 priority 0 Apr 6 15:15 from SERVER1 on TEST1022
005xud4T.PR3 5 copies 34178 bytes
no entries
no entries
no entries
no entries
thanks in advance.
DMHello
The flag to pass copies may be set as follows in SPAD:
SPAD -> Output Device -> <Output Device name> -> Output Attributes ->
You can refer to SAP note below for more information:
3748 - Multiple print does not work everywhere
Regards. -
FF always closes two tabs when I only want ONE closed!
Every time I want to close a single tab, Firefox states 'you are about to close two tabs'. I DO NOT WANT to close two, only one! Is there any way to set this? it is very irritating.
Thank you.
Also, below my question here I am about to post, you have my installed plug-ins listed. WHY are some of them underlined in red??That issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.
pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly. I used the same previous document and printed it with Foxit Reader 5.1. The printer printed two copies when only one was requested as it had done in the past. We still have a problem.
I am using Windows 7 (64 bit) for OS. I have experience the issue on two different computers.
dslledyrt
This question was solved.
View Solution.Hi dslledyrt,
Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
I had gotten two copies of Adobe Font Folio, when I only wanted one. How do I return it?
Somehow, I was given two confirmation numbers for Adobe Font Folio, and was charged for both. How do I return one?
You need to contact Adobe Customer Support directly assuming you purchased directly from Adobe. Otherwise, contact the authorized Adobe reseller from whom you made the purchase.
- Dov -
HT1495 help i have two itunes accounts i only want one.
I had an iphone touch and I set it up with an itunes account. Later when I set up my iphone (and subsequently my ipad) I used another email address accidentally. Since then I had my main computer reformatted, and lost all of my itunes music (aside from recent purchases) and since my ipod has been irrepairably smashed. Although somehow my phone still has all of my music, the only music I have on my ipad is new items purchased on my iphone.
I have two itunes accounts and in the history I can see all of the purchases, but do not know how to drop them into my current itunes account (with the other apple id).
Hoping for help...You can't. Apple will not allow merging of iTunes accounts. You need to pick one (whichever has the most stuff) and just use that one.
Otherwise, you'll be constantly signing out of one account to sign back in with the other. -
Here's the issue-I have two iTunes accounts, yet account #1 always comes up when I want to update my apps. This occurs even when account #2 is logged in and has been synced from desktop to iPad. Additionally,Account #2 is logged in on the iPad and yet account #1 prompt appears when updating. Interestingly account #2 functions normal for iTunes purchases but not apps purchases. Any suggestions?
Apps will ALWAYS be tied to the account from which they were purchased. You will always have to update the apps from the account from which they were purchased.
-
Xcode building to both architectures when I only want one?
I have a fairly simple (one source file) command line application in C which was written for Linux but ought to run in OSX as long as I can provide its dependencies (some GNU libraries). I compiled/installed the GNU libraries it needed using Fink. Fink only builds Intel binaries, since I am using an Intel Mac. Because of this, I need Xcode to only try to compile my little application as an Intel (i386) binary, and not try to make a PPC binary or a Universal binary.
I opened "Project" -> "Edit Project Settings..." -> clicked on the "Build" tab and went to the "Architectures" setting. I made sure it said only "i386" and did a Clean and then another Build. However I can clearly see in the build log that Xcode is invoking the compiler and linker twice each -- once for each CPU architecture. After compiling the PPC version of my code it will fail to link, because there are no PPC versions of its dependencies (the GNU libraries).
Why is Xcode doing this, and is there a second setting that I haven't found, to make it ONLY build an Intel binary?I tried your experiment and saw a similar problem... I'm on a PPC Mac though. Initially the standard tool was building a Universal Binary even though the Project Info -> Build -> Architectures was just set to "ppc".
So first I tried going to the "General" pane of the Project Info window and switching the pop-up at "Cross-Develop Using Target SDK:" from "Mac OS X 10.4 (Universal)" to "Current Mac OS"... That still tried to build a universal binary only this time I got several errors on the Intel link phase because the "Current OS" SDK contained no Intel libraries.
However there appears to be a different Architectures setting on a per Target basis.
In your "Groups & Files" pane expand the "Targets" group and select your target. Then click the "Info" button in the toolbar (or select "File -> Get Info") to get to the Target Info window. Select the "Build" pane... On my machine the "Architectures" setting here was set to both "ppc" and "i386". Turning off the "i386" here fixed my problem and allowed it to build only for ppc.
I'm not sure how these Target settings roll up into what you see in the Project settings. But it does seem kind of odd.
Steve -
HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies
HP Laserjet P3015 double sided printing is set up on Windows 7. When printing two copies of a document, if it has odd number of pages, the last page is printed on both sides of the page. There is no page feed for the last page.
Suppose say there are 3 pages in a document and you want to print two copies. It prints like 1/2, 1/2 and 3/3. The third page (odd number) print on the same page. The last page page does not print on two pages.
It works alright on Windows XP.Hope that you have configured the correct paper type and size in the printer hardware and also selecting the same paper tray, size, type from the printer driver while printing.
It may be caused due to the job formatting done by the application software or some jobs settings done from the job/application or printer driver. Check by toggling the 'collate' option and also try to print from a different application software.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP) -
how can I make two copies of the same picture one with my watermark and one without for printing for clients?
Export the photo twice, once with a watermark and once without a watermark.
-
I purchased a Gateway LX6810-01 from BestBuy this past February. It came bundled with a Canon MX310 printer. I can copy, print and fax with the printer, however I can not get the scan function to work. I worked with Canon for days and nothing they tried would fix my problem, they finally told me to contact Gateway.
I contacted Gateway, the printer is still under warranty, and they wanted to charge me about $700 to work on my problem. The last error message I got was "missing dependency 1068" "the dependency service or group failed to start" "windows could not start the (WIA) service on local computer" .
First of all I would like my problem resolved. Secondly I am curious to know if anyone else that purchased this particular bundled product from BestBuy encountered the same problem and if so, why is this being bundled if it does not work. Thirdly, I am curious to know if switching from Windows Vista (64) to Windows 7 will solve my problem.
All help and advice would be greatly appreciated.
Joe {Last name removed per Community Guidelines}Make sure they are the 64 bit drivers, you may have to download them from Canon's website.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks! -
Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?
Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J. -
Why does Captivate have to convert all the PPTX slides when I only want two?
Hello friendly people : ) ,
I often import Power Point slides into my Captivate projets. Even when I only want two slides from a large Power Point presentation, Captivate converts every slide, and this of course, take quite a bit of time. Is there any way around this?
Thank you.
RyanHi Ryan,
How Captivate does import is, it fetches all the PPT/PPTX source content in the import process and then produces the Selection box where you can choose what all slide you want to bring in and then on proceeding it converts those slides to Cp compatible Slide structure and introduces them at the stated slide location.
What, I understand (Looking at your other thread) you do not link and re-import all slides after making any small change. So, if these modifications are being made by same individual on same machine, he can simply right click and edit the presentation from PowerPoint and save it to bring all the changes (this can be done without switching to linked in library).
Thanks,
Anjaneai -
How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?
How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...
Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.
-
I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
Is there any way to see my print order history and reorder the same book for print ?No. Apple only keeps the pdf file for a book for 30 days. Without the library and book project you won't be able to reorder the same book.
Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
OT
Maybe you are looking for
-
Using IFRAME in JSF to display a PDF file
2 all, How do i display a PDF file inside a JSF page in a IFRAME tag? I store the PDF file location (like d:\images\pdf1.pdf) in my database. I cant give this location directly into the src attribute cos then the file will be rendered to only users w
-
How to select all objects in a document?
AI newbie question: I have an active document with two linked files, I need to select both of these in a script and embed both. Then I will be selecting these separate and performing various actions on each. In JavaScript, once I have the document o
-
Address book on macbook pro isn't syncing
Hi all, I just discovered that the Address Book on my MacBook Pro isn't as up-to-date as the one on my iMac. I fairly recently updated to Snow Leopard. Is there something I can do to solve this? I sort of thought that everything was supposed to sync-
-
I purchased a PodFreq for my 60GB video ipod and I would like to know if anyone knows of an adapter that will adapt the dock connection on the USB 2.0 cable (that came with the iPod) to a 6 pin firewire or mini usb port. I want to be able to charge m
-
Hello everybody, is there anyway to use iCloud push notification on iPhone 4? I used my iCloud email adress everywhere and don't want to change to a Gmail, where the push notification work. I am from Germany.