Canon MX7600 scanning won't work with Lion

Canon tech support tried downloading and installing latest software, throwing out old stuff, etc.., but finally concluded the problem lay with the operating system. Any thoughts?

Thanks for your response, Pahu. The scanner drivers are both installed. Also, I just downloaded and installed Apple's latest Canon printer drivers, released today, and restarted. When I open Image Capture it says "No scanner or camera attached." The printer is connected via USB and will print. Also, attempting to scan from the Canon Solutions Menu produces an error message: "The scanner driver supported by this software is not installed. Install it and then retry."
If I connect a NeatReciepts scanner, it does show in Image Capture and does scan.
I've opened a trouble ticket with Apple.

Similar Messages

  • I recently install Lion OS on my iMac and just found out that my Canon 4400F scanner won't work with Lion, what can I do to get it working again?

    I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of buying a new scanner? I am also upset that my Microsoft Office Professional will no longer boot as well. Anyone know why this took place?

    If it will not longer work due to Lion, it's most likely becasuse no drivers for Lion have been released.  No way to get aroud it other than going back to Snow Leopard.  MS Office wont work if it is '04 or earlier becasue it is a PPC application.  Mac switched from PPC to Intel in 2006 and created the Rosetta emulator to allow companies to make their software compatable or allow users to buy new software.  After 5 years, Rosetta support was dropped, with the release of Lion.  No way to get this software to work with Lion.

  • Microsoft Office. Epson Scan, Canon software won't work with Lion OS

    Microsoft Office. Epson Scan, Canon software won't work with Lion OS

    Microsoft office 2008 and later work fine on Lion. Office 2004 is a PowerPC application. PPC apps are no longer supported and Lion does not include Rosetta, which was required to run them on OS X. I imagine the Epson / Canon software you are trying to use is the same. Check with them to see if updates are available.

  • Intuit's Quicken won't work with Lion.  Installed and am using Quicken Essentials but it's not as convenient.

    Intuit's Quicken won't work with Lion.  Installed and am using Quicken Essentials but it's not as convenient.

    this has been an issue with Quicken for a long time! Quicken was initially a Mac only application and then they got greedy! i beta-tested Quicken for Intuit for years and when they announced they were not going to support it any more the screaming was loud but not heard!
    Quicken Essentials is a crime! i wasn't even asked to beta-test it; probably because they would have gotten an earful!!! it is not essential; it is stupid.... AND, of course, their online version was a disaster. i use Quickbooks Online for business and it works like a charm; i mean it even downloads ignominious PayPal transactions now!
    i am also stupid for not really checking out if it would work with Lion - ALL of my financials are on it. I am going to have to do what @cwiens suggested above and either pull out an old Macbook I have or my well stored original Cube in its original box! thank the fates for the double backup i've always done with Quicken - Time Machine & its own key drive!
    btw, this is an old Microsoft trick - not having older versions of apps work on OS updates so they force you to buy the new versions.

  • Quicken for Mac replacement - won't work with Lion

    Quicken has sent an announcement to users confirming that Quicken for Mac 2005-2007 will not work with Lion, and encourage these users to begin using Quicken Essentials.  Obviously this is not an option for many.  I'm going to try out iBank 4 as a full replacement for Quicken for Mac, although I understand online bill pay is not supported.
    Any other former Quicken for Mac users using iBank 4?  Would love to hear your thoughts about it.

    Just to add to the thread..
    As Quicken will not be supporting the Mac Lion Update, I will require a replacement financial/banking software package for Quicken 2007.
    I tried Quicken Essentials but it does not do what I need.
    I am looking for the following features:
    Check Printing
    Memorized Transactions (QuickFill in Quicken)
    Custom Reports
    Memorized Reports
    Scheduled Transactions
    I do not need investment/budget/online banking features.
    Sure would appreciate some advice!
    Many thanks!
    ...John

  • Canon LIDE210 scanner won't work with 64 bit arch.

    I have a Canon LIDE 210 flatbed scanner which is supposed to be fully supported in linux - for many many months if I plug it in, and start up GIMP to use the scanner plugin - initially it looks like it will work but although it successfully completes a preview scan, if I ask it to do a full scan of a page or section of page it makes abnormal noises, and ends up usually screaming as if in pain, and then the sane application hangs. This is if it is plugged in to a laptop with usb3 cable connecting the laptop to the scanner, and running 64 bit arch.  Yet the same scanner plugged in to a laptop which only has usb2 ports, and running 32 bit arch works flawlessly running the scanner in the same way.
    I expect that the 32/64 bit arch issue is not relevant, and it is some problem with the usb3 drivers not being compatible with the usb2 capability of the scanner that is causing the failure.
    I have seen some suggestion (from a Ubuntu forum) to "In the UEFI/BIOS change the setting under USB configuration, "XHCI Pre-Boot mode" from enabled to disabled. In some BIOS configurations this setting is known as "XHCI Mode". Is there a better way to resolve this since usb3 external drives and usbkeys work fine without this change on the same machine.
    Does anyone have any experience with running usb flatbed scanners via a usb3 port, and if so is there a workaround that is known to work with this particular scanner? I have seen the thread at https://bbs.archlinux.org/viewtopic.php?id=184816 which also did not lead to a solution.
    It would be nice to find a way to deal with this although perhaps a newer linux compatible scanner that is equivalent to the LIDE 210 is available that is compatible with usb3?

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canon LiDE35 scanner won't work with latest CanoScan software

    I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
    If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
    Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
    Best regards,
    Steve Schulte
    Tuesday 27 April 2010

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canon MP780 printer won't work on Lion

    I've recently upgraded my Mac to one running Lion 10.7.2.
    My Canon PIXMA MP780 no longer works. The icon is sitting in the dock with a no-entry sign through it.
    I've downloaded new software and drivers for it, restarted, deleted and re-added the printer via System Preferences, and am really not sure what to do next...
    Have emailed Canon who can take up to 5 days to respond.  I'd like to do some printing before that if I possibly can.
    One thing I wasn't able to do that Apple recommend here: http://support.apple.com/kb/TS3147 is to reset the printing system.  The dialogue box they refer to doesn't contain the 'reset printing system' option they refer to here: http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
    Would be most grateful if anyone has experience of this or knows of a fix.
    Many thanks!
    Helen

    I have the same problem!  I upgraded software and the Canon MX780 printer just went away.  Print & scan has the Canon MX870 series put only the scan options.  However, I can still print from a networked laptop.  Just like I always could.  Thinking of importing the laptop DMG and trying to install it.  Canon site has only a scanner driver.
    Apple support site tells me that Canon printer driver for MX870 is"
    Canon MX870 series
    10.51.2.0
    P
    Like I said I can print from a networked laptop.

  • Truecrypt won't work with lion.

    Truecrypt worked great with Snow Leopard.  Won't with Lion.  Get message about "MacFUSE file system not available."  There is info I need to get from Truecrypt.  Help please.

    I have just found that it indeed does work, but only after I downloaded a new revisionof Macfuse, which I learned from another forum.

  • Trackpad won't work with LION new options...Apple said trackpad solid-state and not compatible MACPRO...REALLY???

    So frustrated!! Should have had disclamer that it might not work with OLDER 2008 MacPro...

    It seems to work fine with my March 2007 Mac Pro. Mind you, you're probably overlooking the need for the Bluetooth adapter. I bought a Belkin adapter from Apple Store. UK, cost about GBP10.
    Edit:  This is the baby:  http://store.apple.com/uk/product/TW622ZM/A?mco=MTY3ODQ5OTY

  • Printer won't work with lion os x

    I just upgraded to Lion X and now my Canon MX860 printer wont work. 

    The Canon website has drivers for Lion
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx860#DriversAndSoftware

  • PowerPC apps won't work with Lion

    I have an application that is no longer working as the message says Lion no longer supports ower PC apps?
    Is there any work around for this?

    pengtao wrote:
    Find an update for the application, or find a newer application doing similar work.
    The app that is giving the most people fits is Quicken.  Other than running Quicken for Windows in a virtual program (like Parallels) (which I already do), there are no really good alteratives to Quicken (not that Quicken for Mac was ever any good to begin with).
    MotionMan

  • ICal won't work with Lion OS

    I just downloaded the new Lion OS and now my iCal won't open.  I click on the app and an error message pops saying "application may not be compatible with operating system"

    yes, the "dock" is the tool bar at the bottom.  Is your iCal already showing on the dock "tool bar"?  if it is, right click on the iCal icon, click on "options", then click on remove from dock.
    Then, go into your applications folder, right click on iCal, click "options", choose add to dock (or something like that).

  • Logic Express 9 won't work with Lion

    I just bought a new Macbook Pro! I love it. I used Migration Assistant to move things from my last mac onto the new one. A part of that move was Logic Express 9. Eveything else from the move works fine--GarageBand files and all. But Logic will not open. It keeps saying that the program is not compatiable with this version of OS X. I removed Logic from my computer and reinstalled it from the original DVD. Said the same thing. I've been reading a lot about this issue on various communities and talked with Apple support. They said I needed to upgrade Logic from 9.0.0. Well, fine. I download the 145 MB upgrade twice and it says that the upgrade cannot be installed--that it might have been corroded during download. Says that both times.
    I am lost--I need this program to work. I produce music for myself and others. I can't do without it. I don't fuss with things on my Mac. I have never moved or renamed any files. Everything is where it was when it was installed.
    I am lost and don't know what to do...

    I appreciate the response!
    I was reading some more and kept having the same problem. I ended up re-installing it a third time, then downloading the update, and finally got it working.
    Something just was weird with this.
    But got it going!
    Thanks!

  • Outlook won't work with lion

    Since installing OSX Lion on my Macbook, Outlook '11 will no longer work.  Any ideas?

    I have just found that it indeed does work, but only after I downloaded a new revisionof Macfuse, which I learned from another forum.

Maybe you are looking for

  • Recovery media creation does not work properly,how can i make recovry disk

    when i started recvry med cretion it collected files for 50 mins then i inserted sony dvd, it started writing then suddenly ejected the dvd asking that (use dvd-r or dvd+r, no RW dvd can be used for this ). i checked my dvd.it was correct. my dvd is

  • Error OLAP processing one application - SAP BPC 7.0 MS

    Hi everybody, This is our problem, when i try to process my application called "Consolidation", it always fails and appears the following error message: "Cube process: Errors in the OLAP storage engine. The Attribute key cannot be found: Table dbo_tb

  • Regarding T Bar in Oracle 10g Reports

    Hi,      We have the requirement to generate line graph report to meet the following requirement.      The graph must be draw 4 horizontal lines.      In these 4 lines, two lines displayed in the top and two lines in the bottom. The bottom two horizo

  • Reconciliation Account question

    Friends, I know that we can have multiple reconciliation accounts(for AR and AP) or we can have one per each subledgers. But my question is,  what typically happens in a real project? do you have to create multiple accounts or just one Reconciliation

  • Budget Exceed Problem while Reversing CC Document

    Good Morning, While Reversing a cross company code document through FBU8, one of the document (of Company Co. A) is reversed while other document (of Company Co. B) did not because budget is not available in Company Code B. An Error Message should pr