Canon MX870 Drivers not working

After installing Lion, My Canon MX870 programs no longer work. I was able to print but not scan. Anyone else having this issue?
Checked Canon's site - No 10.7 drivers
Ran softwre update - Did not help

Can you check the settings on your printer, please, to see if the following is on?
On the Printer Panel >> Setup (button) >> Device Settings >> LAN Settings >> Other Settings >> Bonjour Settings >> LPR Service advertising >> ON

Similar Messages

Canon pixma mp600R not working after security update

Hi,
yesterday apple software update installed the last updates for my intel imac with 10.4.11. After that my canon printer is not working via airport. USB works fine. the networking utility sends and receive pings to the printer.
Tried to reinstall with the canon network tool. after checking of the airport signal (good) the printer utility open but I cannot add my printer, because its not shown.
does have anyone a idea to get the printer working wireless again?
P.S. My ibook prints pretty fine wireless to the canon. So its not a airport problem.

Hi Martin, try this...
Safe Boot off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Reinstall the Driver if need be.
Fix Permission before & after any SW update.

U330 Windows 7 Drivers Not Working

Hello,
I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
thanks!
Solved!
Go to Solution.

check out our thread here
http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

Help with Canon MX870 - scanner stopped working

Hi,
I bought a Canon Pixma MX870 printer/scanner a month or so ago and it was working fine up till this week. I had installed the Canon software and ran the OS X Software updpate when setting it up.
All of a sudden last week I couldn't print. It kept saying the printer couldn't be found. So I downloaded the Apple Canon printer software and reinstalled it thinking it couldn't do any harm. The printer is working again. The scanner not so much. If I do manage to get it to work (either by using the scanner from System preference > Print/Fax > and choosing open scanner or by using the MP Navigator it typically now will only work 1 time. After that it says "scanner not found" and sometimes if I close and reopen the scanner from Print/Fax it says "trying to open scanner session".
I know the MX870 is connected to the network. The blue wifi light is lit, it shows in the router's list of connected devicies, it also shows in Safari's list of Bonjour Devices.
I need this machine to scan and play nice with OS X - I need to scan more than print.
I ran Disk Warrior, ran chrons to do maintenance and fix permissions etc. I tried deleting and re- adding the scanner. That didn't work and I had to restore it from backup.
Anyone have any ideas on what to do next?
Thank you.

Marlinespike wrote:
However, I went to take a screenshot and something very weird happened. It popped up a dialog box where the scanner was checked as shown in your screenshot with an 80.????? IP address (the ? are because I don't recall)
The 80 number would have been the MX870 wifi network address - not the IP address. The scanner selector tool does not show the device IP address, only the network address.
...asking if "Canon IJ Network Scanner Selector 2" could accept incoming connections from the network and there was a 3rd choice listing the scanner as "Canon MX870 series_3DXXXXX (where I am putting in Xs because I suspect it is a serial number).
Based on this I would guess that the firewall is enabled on your Mac and the prompt is to add an exception to for the networked MX870 (and the X's are the last digits of the wifi network address shown in the selector tool) so that communication can flow between both devices.

Canon MP600 scanner not working - help!!

I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I've updated and installed all the drivers from Canon's website. I cannot figure out what is causing the problem, or how to rectify it?
Please offer any help you can. Thanks!

Hi all,
I had the same issue with a Canon MP600. Printing
did work, but it refused to scan with scanner not connected
message.
I updated all the drivers, no luck.
As a last resort, I changed the USB cable to a certified
USB 2.0 high speed one and it started scanning
I would suggest to try the following procedures:
- find a USB high speed cable
- connect just the mac and the printer
- test
If it it works it might be the old cable or some
interference with another USB device.
Reconnecting one at a time the other devices will
be the final step .
If it does not work also after having updated the
drivers and standalone with a Hi-speed USB cable
I have no additional clues, sorry.
Hope it helps

Canon MG5140 scanner not working

Please help me, I have just recently upgraded from a late 2008 model MBP, to a new 15" Retina MBP.
I have a Canon Pixma MG5140 multifuction printer/scanner. On the old MBP everything worked fine.
Yet on the new Retina machine the scanning function does not work. The printing function works fine, just no scanning
I went onto the Canon website and down loaded the most current software and device drivers, but to no avail the machine stil won't scan. A dialougue box, opens up saying that the device is not connected or the drivers are incorrect.
Does anyone have any advice regarding this problem? Would appreciate any help.
Thanks

Check that the driver is up to date.
Canon drivers for Mavericks:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware

Canon IR C2380i not working after upgrading to 10.9

Hi,
I was wondering if any one knows a work around to get canon ir c2380i working on th emac, i have had a few issues with this but now afetr the upgrade it is no longer working.
I have contacted Canon and i have updated all driver yet nothing is working
The printer worked fine before the upgrade (but it took a while to get this going)
The printer is a network priniter with Fixed ip adress
Any help would be much apreciated.
how can i big up my Apple when its not working.. Come on apple please dont become like window and relese with errors its just pants it why we pay the extra right ?

Have you looked at the other Canon posts here and tried to download the driver from the Australian Canon site? There are also some posts in the "More Like This" sidebar.
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Hope this helps.

HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Canon Printer scanner not working

I have a Canon Imaginclass laser multifunction printer, but the scanner does not work. Can anyone give me a detail steps to show me how to fix this problem?

What is the error message?
Try resetting the printing system.
Reset Printing System

Canon Lide 80 - not working after 10.5.8 update

Hi,
Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
Cheers
Andrew

Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
I didn't do anything special -- the scanner continued working normally after the system update.
What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Canon MX870 Drivers not working

Similar Messages

Maybe you are looking for