Canon MX870 duplex printing problem

I usually have letterhead paper in my printer tray. And everything used to work fine: if I were printing single-sided or duplex, the printer always printed the first page properly, on the side with the letterhead.
But ever since I upgraded to Mavericks, it will print single-sided on one side, and page one of duplex printing on the other.
If I load the paper face up, duplex printing puts page one properly on the letterhead side.  But if keep the paper face up and print single-sided, it will print page one on the back of the page.
Anyone else experiencing this? Anyone have any dieas how I can fix this?
Thanks in advance.

Hello Roger,
I just tested your symptom on a Canon MG6150 and it appears to be working fine for me.
I loaded a letterhead sheet face-up into the printers cassette. I then selected to print a single page from TextEdit. The text printed on the correct side.
I then created a second page in TextEdit document and selected to print. From the print dialog I enabled the duplex setting in the Duplex Print & Margin menu of the Canon driver. With the letterhead sheet loaded as face-up, page 2 printed on the blank reverse side first, and then paper was pulled back into the printer and page 1 was printed on the letterhead side.
So can you reply with what application you are having the issue with.
Can you also reply what driver version you are using. I am using v10.89.1.0 which was a recent update. You can check this by opening Printers & Scanners, selecting the MX870 and clicking on Options & Supplies. The General tab will show the version.

Similar Messages

  • Duplex Printing Problem - Word 2007, Vista and HP Officejet Pro L7780

    I'm having trouble with duplex printing on my new HP Officejet Pro L7780, from Word 2007, running on a brand new Vista system.  I've also had this same problem (repeatable) with two other computers, running XP Professional/Word 2003, XP Home/Word 2003.  All of the service packs have been installed for the operating system, word, and printer. 
    If you print a landscape document, using the auto duplex setting for the HP printer, the margins will print out offset by .25 inches, on the left and rigt margins.  So if your margin is 1 inches on right and left, the margins will print to .75 on one side and 1.25 on the other.  This would be annoying, except that I'm trying to print brochures and books, which requires that the pages print out exactly as set up... "close enough" isn't working for me
    The way I have replicated this problem is as follows:  set up a document in landscape format, using the default margins.  Insert an image on page one, size it so it takes the full margin area.  On the second page, fill it up with text.  Print the document, selecting the printer properties and setting Print on Both Sides=Automatic.   The easiest way see the problem is by holding the document up to the light.  The front and back margins should match and they don't.
    Any help you can provide would be very much appreciated.
    Diana

    Diana,
    This problem is perhaps much larger than you might have imagined.  We have tried to work with Hewlett Packard for over two years on the duplex printing problems.  In the process, we have expended over 100 hours of effort in troubleshooting the problem which has included updating software, reinstalling software, developing test documents, escalating issues, submitting technical findings, and in purchasing replacements.  Unfortunately, our efforts to interact with Hewlett Packard excalated support have resulted in an aire of apathy, disinterest, incompetence, frustration, redundancy, occasional discourtesy, and an outright lack of professional decorum - something inconceivable of a large, reputable company.
    We have identified several problems with duplex printing.  The duplex printing problems include irregular margin increases (.25 to .50 inch), margin shifts, cut-off text, compressed text, and compressed graphics.  Please note that most of these problems are only evident when printing documents from computer applications to the printer.  If the user simply uses the front printer panel to copy in duplex mode, these problems are not always evident.  This suggests that the printer mechanics are capable of properly duplexing and that the problem lies in the drivers.
    The problem is evident on the HP OfficeJet Pro L7780, Photosmart L7180, Photosmart C6150, Photosmart 3310, and likely on many, many other HP models.  The problem is evident on many computers (HP, IBM, Toshiba, and Dell), is evident in multiple applicatons (Word, Wordperfect, Excel, Peachtree, Notepad, and many more), and is evident on multiple operating systems (Windows XP Home, Windows XP Professional, Windows XP Media Center Edition, and Microsoft Vista).
    We consider ourselves to be extremely polite, patient individuals, but have nearly been driven to outrage by the indignant disregard offered us by HP's escalation support department; a department which should represent the cream-of-the-crop in both service and technical expertise.  Given the ease with which the problem can be duplicated, we expected an extremely quick resolution by HP who, to our knowledge, has never even made the effort to duplicate the problem in-house on our behalf.
    Ironically, HP highly advertises their J.D. Powers rated technical support, yet it appears that they actually have extremely poor published consumer rankings in some of today's mainstream computer magazines.  HP technical support makes no apologies for the fact the user cannot use a major feature of their printers, offers no indication that the problem is even being addressed, and off-loads the responsibility by suggesting that we contact Microsoft (who is to blame for this issue).
    Thank you, Diane, for your message.  We had a hard time imagining that we were the only one experiencing this problem, especially when HP promotes such a representation.  Which also begs the question why HP plays like the problem does not even exist?  I also fail to understand why HP technical support shows so little interest in a problem that is easily duplicated and adversely affects a major feature of the printer which is commonly used by individuals purchasing equipment for its duplex capabilities.
    This is sad because we have been a loyal customer of HP for over twenty-five years.  There was a time when we would have happily endorsed HP's steller products and steller support (provided you could get a problem escalated).  Now, however, they all-too-often appear to offer equipment that fails to support advertised features which is backed up by sub-standard support and extremely expensive ink.  This is an especially sad commentary for users who are buying HP's upper-end printers and computers.
    We desire to know if there are others out there experiencing similar problems?  If you have experienced these problems or would like samples of the problems we have duplicated, please respond.  I think the more information we gather, the better our chance of a successful resolution to a serious problem.
    Thanks Everyone!

  • HT4356 app for canon mx870 wireless printer to convert to air printer

    Is there an app to enable a Canon MX870 Wireless Printer to be used as an Airprinter for IPad2

    Val85-
    I suggest you look for a Canon App at the iTunes App store.  It will have limitations, but should get you printing.
    There are other printing Apps with more features such as Print n Share or PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.  These include their own mail, browser, photo and text programs.  In other words, they do not provide true AirPrint capability.
    Depending on your situation, a better option may be to run a program on your computer that will share its printer as AirPrint over WiFi.  Programs such as Printopia and FingerPrint can do that, and are reported to work well.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh> <FingerPrint for PC and Mac>
    Fred

  • C9295A Duplex Printing Problem

    I have been successfully using the C9295A (Officeject 6000, E609n) wireless printer for eleven months.  Set up wireless, connected with win 7 PCs and laptop.  Primarily used for duplex printing and has worked very well.
    Several weeks ago it started having errors when printing, almost exclusively when trying to use the duplex printing.  The first page would print normally while the second side would print only about the bottom inch.  Each time it failed there was an error showing in the print queue (Error: Sent to Printer) and subsequent print jobs would fail until that was cleared.  Didn't matter which machine I used.  Connected with ethernet and had the same problem.  Used with wired PC and ethernet and still had the same problem.
    Used downloaded printer troubleshooter and network troubleshooters from HP.  They did not detect problems.  Reinstalled software on two machines with no change.  Had a network port error after that, but said to reboot and try again and it passed.  Printer is set up on a WDS port.
    I did notice that if I printed a large job (say 10 pages) with duplex it would print most of it correctly.  Have also had some failures where a single page would fail, usually when printing graphics.
    I can't seem to find my specific failure in any of the troubleshooting pages.  I have seen the same symptom in some older posts concerning IE8 printing but  I use firefox.  Also the problem is the same whether from Word, a PDF document or a browser.
    Has anyone seen a similar problem?Kind of seems like it is having problems keeping the info in memory in the printer.  Is that possible?
    Lastly, I haven't yet figured out how I get help with my printer under warranty.  The HP site just keeps sending me back to troubleshooting pages.  They don't recognize my serial number (even though it is registered) and their program to detect it fails.  When I tried to use the "contact by email" link it just brought me back to the "check warranty" page which, of course, fails.  Anyone have any insight there?
    Can't believe I worked for this company for 29 years and still can't figure out their website - guess it doesn't say much for the "ease of use".
    bobf

    Again, thanks.  I also contacted Canon and they suggested I delete the driver and reinstall from their website.  I did that it worked.
    For anyone with a similar problem here is the link and instructions from Canon:
    Remove the current driver from printers and scanners.  Highlight the MX920 series and click the -.  Download the latest driver from our support site.
    http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/ InkJet/PIXMA_MX_series/MX925.aspx?DLtcmuri=tcm:14-1099303&page=1&type=download
    Install the driver and add the printer in printers and scanners.  When you select the MX920 series printer confirm that MX920 is listed under “print using” and then add.  When this is complete, try to print.

  • Duplex printing problem with Reader Upgrade

    I upgraded Acrobat Reader 10.1.8 to 11.0.4 and can no longer access fast or duplex printing for PDF's. I have a Canon MP970 printer for 3 years and have always been able to do both fast printing and duplex printing of PDF's.
    How do I resolve?

    I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
    Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
    Preview works fine, but of course the colour balance makes the output unusable.
    OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
    Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
    Worked fully and correctly with the same apps under 10.5.x.
    At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
    Any useful* observations, suggestions or workarounds welcome.
    *Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

  • Duplex Printing Problem in Adobe Reader X (Mac)

    My normal printer setting is for duplex printing. However, Adobe Reader X will only print on one side of the paper.. This is on a MacPro under Mac OSX 10.6.6 and Adobe Reader X Version 10.0.1 printing to a Canon IP4500 inkjet printer. Other applications duplex fine.
    Any one else with this problem? Fixes or workarounds?

    After having the problem / aggravation, I went through each area trying to
    learn how to get past it.  Finally, I checkmarked 3x "Don't Show Me This Again" 
    Then I established a default printer thereby forcing Adobe to retain print preferences
    instead of  defaulting to "Any Printer" and losing custom settings
    STEPS I TOOK (you may know of something faster, easier?)
    CTRL P  or  File, Print to receive standard print dialogue
    Within "Printer:"  use drop down to select  "PRINT & FAX Preferences...."
    Note: You can set print & fax preferences thru System Preferences, but for
    now we're here
    Select the printer you will normally use and set up a default printer (for Adobe)
    If the Lock at bottom left is closed it will require the system admin ID and PWD
    to unlock/lock in order to make changes :-)
    Once finished close this (top left)
    You will be returned to this panel
    To the right of the "Printer:" drop down is the arrow that expands your options,
    make sure it is aiming UP
    Middle of screen is "Layout"  Select the drop down and select "Two-Sided Printing"
    Look at the next screen image posted below and you will see there's more steps to
    follow for two sided printing
    Check mark "Print Both Sides"
    By Re-Opening the Drop down now showing "Two-Side Printing", you can of
    course adjust other items while here
    Paper Type/Quality allows you to select items such as print quality, color settings
    Select "Print" (bottom right of screen) to return to Adobe Reader Print Page
    Save time by opening the "Presets:" dropdown and save this as a custom print setup name
       i.e.  grayscale_DblSided, Color_DblSided...
    Finally, Check Mark  "Reverse Pages" to print Back to Front and help Adobe
    not to print a single sided first page and double sided pages for the others... Nice!
    It's time to press "OK" and hover over the printer to ensure Adobe didn't send
    instructions to print your 100 single side pages despite all best efforts
    Since going through this rigamarole I have not had to reset it every time
    Message was edited by: MACGASM
    Message was edited by: MACGASM

  • Canon MF4150 duplex printing

    Hi All,
    Has anyone gotten duplex printing to work on OS X (10.4.9) with the Canon MF4150? They just released a new driver version (1.5):
    link: http://www.usa.canon.com/consumer/controller?act=DownloadDetailAct&fcategoryid=3 35&modelid=14444
    I installed this over the 1.4 version. The two-sided option (on the finishing tab of the print dialog) is still greyed out.
    Canon tech support says that two-sided printing is unavailable on this printer.
    However, someone over at macintouch says that they have gotten two sided printing to work on the MF4150:
    http://www.macintouch.com/readerreports/printing/topic4318.html#apr13
    So, what is the answer. Is two sided printing possible from OS X on the Canon MF4150?
    MacBook Pro 2.0GHz Mac OS X (10.4.9)

    The MF4150 uses the UFR2 driver that is also used on the imageRUNNER copiers, which I already have installed on my 10.4.9 MBP. I added the printer driver and can see that the machine definitely supports duplex printing. As you have found it is located under Finishing > Print Style > '2-sided Printing'.
    Since your option to select this is not available, I'm wondering if it is a detection issue? The UFR2 driver, like the PS driver, cannot be configured via Printer Info > Installable Options. For the iR's, the driver polls the copier to determine what accessories are installed. This is usually done on installation but I have also seen this 'get device info' window appear the first time you try to print. I would try selecting the printer in the printer list and clicking Utility. This will open the UFR2 Print Monitor which will give you info about the printer setup. This may 'update' the driver so that 2 sided becomes available?
    Also, I've had issues with the Canon drivers/ppds where one option is greyed-out due to a constraint. For example, to staple a print job the collate needs to selected. But after selecting this, the staple option is still not available. You have to select another menu item, such as ColorSync, then go back to Finishing to select Stapling.
    A last suggestion would be to delete the driver, reset the printing system and delete the UFR2 folder in Library/Printers/Canon. Then reinstall the new v1.50 driver (which is a Universal version) and add that again to see if it resolves your problem.

  • Duplex printing problem with hp 9500 (right side always just half printed)

    Since OS X 10.6 was released there is a problem with the print out of duplex printed pages (specially via Indesign CS4 broschure printing function). Using Mac OS X 10.5.8 with old and new driver everything is fine - but under 10.6, 10.6.1 or 10.6.2 neither old nor one of the new driver releases 2.1, 2.2 or 2.3 will work.
    When I´m trying to print a duplex printing page the print of the right page will be cutted off at the half of the page - like the page would not print A3 horizontally but vertically (so the rest is cut off). The new print features within the printing menu (manual duplex print and print broschure will have same effect but with a strange miniaturization to A5 - although it should be A4). All in all the is no way to print out a duplex printing with OS X 10.6 and hp 9500. Will there be any solution in sight? Are there other with the same effect?

    I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
    Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
    Preview works fine, but of course the colour balance makes the output unusable.
    OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
    Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
    Worked fully and correctly with the same apps under 10.5.x.
    At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
    Any useful* observations, suggestions or workarounds welcome.
    *Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

  • HP Photosmart C410a All-in-One: Duplex Printing Problem

    I just purchased an HP Photosmart Premium Fax C410a ePrinter.  My operating system is Windows 7.
     All went well until I tried duplex printing of a document.  It printed alright, but extra margin space (a good 1/2 inch) was inserted like a border at the top and bottom (but not the sides) of both front and back of each page.  This squeezing of the text causes the font size to be reduced and leaves undesirable white space.  This happens with both manual and automatic duplex printing. 
    I spent hours chatting and talking with HP support technicians while they tried many things to solve the problem, all to no avail.  They suggested I return the printer and get another one, which I did, but the second one has the same problem.
    Has anybody out there run into this problem with the C410?  I would appreciate any help I could get, including from someone at HP. I strongly suspect this is a defect in the software. 

    One of the common issues with automatic duplexing, is the requirement of increased margins due to the way that the process works. It is not a defect, it is simply the way that the process needs to ensure print quality when auto duplexing. In contrast, manual duplexing does not have the same needs, as it draws directly from the tray. From testing of other brands, I can say that I have seen the margin issue occur with other manufacturers as well. Seems to be a necessary evil when auto duplexing.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Duplex printing problem in Word 2010 but NOT in Excel 2010

    At the risk of repeating an old question :
    I have  Windows 7 Pro, Office Professional 2010 and an HP Officejet Pro 8600 Plus and two sided printing is a problem in Word.
    Excel prints in Duplex by selecting "Print on both sides / Flip pages on short edge".
    Word, though, with the exact same Setting, fails and the document is printed one two sheets of paper ... one side only.  Seems rather bizarre.
    Help would be appreciated.
    Neil

    Hi,
    Which Word 2010 version do you use? Please try the Word 2010 14.0.4760.1000 version(We may upgrade or downgrade the version by install or uninstall the patches).
    Next, we may try the workarounds which provide by other communicators, I copied here:
    Workaround1:
    File then Print
    Go ahead and select manual print on both sides
    Go to page setup, print options, and the advanced tab. Go all the way down and select "Print on the front of the sheet for duplex printing."
    After printing the first set, I was able to just turn it 180 degrees and it worked just fine.
    Workaround2:
    As a work around I found if I ignore Words "Settings" and instead go into my printer properties, select the Finishing Tab, and select "Print on Both Sides (Manually)", the document will duplex print correctly.  Requires 5 steps instead of 3
    Quote From:
    http://social.technet.microsoft.com/Forums/office/en-US/b948525f-be7e-453c-9477-8a467852d360/duplex-problem-in-word-2010?forum=word
    Regards,
    George Zhao
    TechNet Community Support

  • Canon MX870 network printer works sometimes

    OK so I am in need of some help with printing over a wifi network.
    I am using a Canon MX870 as a network printer with a Macbook Pro, and iMac that are connected to it via wifi. I also had it connected via ethernet and I still had the same issues. The printer does print but not consistently. It will randomly say that there is a communication error in the canon print status. I had the same issues with another HP officejet.
    I am running the verizon wireless router and Mac OSX 10.6. Any help would be very much appreciated.
    Thanks!

    Given the current situation with the MX870 and the previous issue with the HP then I suggest you try changing the channel used by the Verizon router. Sometimes this can be done automatically by the router - simply restarting the device can be enough for it to obtain another channel. The other way would be to connect to the internal web page of the Verizon, by typing its IP address as the URL in Safari, and then manually changing the channel currently being used.
    As to what channel to use, I suggest you get an application that can scan your immediate area to show what other wireless access points are close and could be conflicting with yours. There is a nice widget called Airlock that will show all wireless access points the Mac can 'see' and show what channels they are using. With this knowledge you can then select a channel that is not being used, or at least reply with what the utility finds and report this back.
    The other thing you can check is the measured signal strength of the MX870. This can be found on the internal web page of the printer, which you access by typing its IP address into your browser. If you don't know the IP address you can use Safari to find the device, by opening the Bookmarks link in the toolbar and then selecting Bonjour in the left pane of Safari. The MX870 should be listed in the right pane. Selecting it will show the MX870 home page and here will be the quality and strength of the wireless signal. If these values are low then this will explain why you have been losing connection with the device.

  • OfficeJet 6500 709n and MicroSoft Office 2010 duplex print problem

    I have an OfficeJet 6500 709n and was able to automatically duplex print with Windows 2003 no problems.  I upgraded to Windows 2010 and now it won't see the automatic duplex printing.   I can only select single page printing and manual duplex printing.  Any ideas what I need to correct????  HELP PLEASE!!

    Hello,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Brother Duplex Printing Problems

    I have a Brother HL-5150D printer that is connected to a Windows WinXP machine. I connect my MacBook to the WinXP machine through a wireless connection. I have confirmed that the printer is correctly shared (i.e. I can print to it); however, I do not have duplex capabilities. I can only print single sided even though the duplex options are present in Microsoft Word (for example). I did not have any trouble with duplex printing in Tiger. The problem appeared after upgrading to Leopard.
    Please help - want to save paper!

    I was able to print double-sided by going to http://localhost:631/ - I found all my printers under the printer tab. I set the printer options there to double-sided. Now when I go to a Word document, select print, the document will print double- sided no matter what is set under the layout option in the print window.
    I don't really understand how all this works but I saw this suggestion on a landscape question and it solved my double-sided problem.

  • Duplex printing problem with access method G

    Dear all,
    We have Canon GP300-405 PS Ver 1.0 printer.
    Previously, with access method F: Printing on front end computer, we were able to do duplex printing.
    Now we have changed the the access method to G: Front End Printing with Control Tech and we are not able to do duplex printing
    We have ECC 6.0 / AIX / Oracle
    I installed SAPGUI patch 17 but still I am not able to do duplex printing
    Any suggestion?
    Rgds..../

    Sandy,
    This note will answer your query
    Note 1149136 - Options for front-end printing (access method G)
    Character string: "DcMode" [printer-specific]
    Default: 0x0800
    Other values: (Nearly) all, see below
    Effect:
    This parameter determines WHEN to send the control of
    a) orientation portrait/landscape
    b) paper size
    c) duplex
    d) tray
    You need to set above mentioned parameters.
    Regards,

Maybe you are looking for