CANON MX892. "6C10" error. Tried powering on and off 100 times but problem still persists. WHAT??
I am seeing the "6C10" error. I tried googling but there were only answers for OTHER printers.
I tried powering off and starting the printer with the lid opened.
I tried reaching into the inside of the printer and cleaning some "white plastic" which according to some forums is is supposed to be overflowing (couldn't find anything).
WHAT IS THIS ERROR?
Hello vng.
This error may occur if one of the ink tanks was not seated properly or when there is a loose object stuck inside the printer.
Please try the following:
1. With the cover of the printer open, unplug the power from the back of the printer or the wall.
2. Look for any loose objects or packing material in the printer, clear if necessary.
3. Try gently moving the ink tank holder as close to you as possible. Try pushing the closest ink tank down. Once clicked into place, try moving the ink tank holder closer, repeat as needed. If you meet resistance, do not attempt to move the ink tank holder any further.
If the issue persists, please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
My MacBook Air has a blinking file folder icon on a blank screen with a ? In the middle of the icon. I've tried turning my computer off and on three times with no luck. Any recommendations on how to fix the problem?
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
when using apps or running safari my iphone glitches then takes an age to reboot,done a full restore but still getting same problems any ideas
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
If you have tried all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...
See if there is anything here first to help with your issue...
Troubleshooting applications purchased from the App Store -
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
-
I upgraded to 4 and lost the use of the back/forward buttons when in a new tab (ok on homepage) Re-installed 3.6 but problem still persists. Any remedy ????
*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/
-
Someone help me my iPad and iPod are saying my Apple ID has been disabled and I've tried signing out and signing back in but it won't work..anyone help?
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/ts2446
Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Cheers, Tom -
TS4148 I have tried all the above methods of resolving, but problem still exist.
I have " No service" "Searching..." message on my Iphone 3gs and i have tried all the mentioned steps but issue still persists.
i am in contact with the support center but response is poor.
i am struggling with it now without any solution.Depending on your issue, go to the Application developer's support page.
-
That really helped but problem still remains with my yahoo mail as I can't access to it due to Chinese language, thanks again for saving my time and pain.
<Edited By Host>Tap Reply if you which to reply to me.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/ae080da5e9afc88c3d 81bf8e8d62a677_zpsc4fd5a10.jpg -
July 13th, 2010: My Firefox tool bar has suddenly completely disappeared, except for the back arrows on the left hand side. I've tried stopping and starting Firefox several times, but nothing's changed. All the toolbars are selected in the View menu ... but nothing's visible!
See [[Back and forward or other toolbar items are missing]]
-
My screen is oversensitive and letters and numbers jump onto the screen as my finger gets close. help
You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
I tried Task manager to kill the 'already running' and it doesn't show up, so I have to reboot.
This does not address my problem. Firefox does not 'hang,' it states that another copy is already running, and that I should first close that copy, which isn't there to start with. Usually on the task bar you'll see one or more open windows tiled or tired behind each other. In this case, there are none; hence, there doesn't seem to be 'another' copy already opened - so I reboot.
After I wrote this thread a few days ago, I did find a work around, but this should not be necessary.
From the desktop, right click the Firefox Icon, then left click 'open,' just as you would if you simply left clicked the icon to start with, but this allows the shadow tab that is in 'theory' open to be bypassed. -
Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?
I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again. -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???
By the way, i am using Windows 7 x64 and updated itunes
-
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys
Maybe you are looking for
-
Hello everyone, I have a business requirement to add a new custom field, at item level, in the Purchase Order transaction (ME21N/ME22N/ME23N). It is a char10 field. I have already created this new field, which is correctly updating the EKPO table. Bu
-
I just bought a new macbook pro and I've anticipated hooking my camcorder up to it. I've had my camcorder for a couple years (JVC Mini DV GR-D270U) and I have hours of footage but I never attempted to hook it up to my old imac, simply because I didn'
-
Hi, I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by the target Office client. To debug those apps
-
Looking for what software required for Enterprise Manager Installation
Hi All, I am fairly new in working with Enterprise Manager, Previously used 11g Database Control, but never install Enterprise Manager (OEM). Now due to the increase in databases, I am considering to install OEM (Oracle Enterprise Manager) to list
-
TECO for order created without material
Hi I want to schedule background program for putting teco status to all order created without materialand which are having CNF status. Orders which has recived CNF status on date which is 60 days in past from current date Please guide how to do tha