Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Ping the IP address of the printer.
If you are doing this from windows, have you installed the airport utility for windows?

Similar Messages

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • HELP!  I had iPhoto on my mac, for some reason it was not responding down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    HELP!  I had iPhoto on my mac, for some reason it was not responding or damaged.   down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    Sorry but we need details to help
    What version of the OS do you have? What has changed since iPhtoo worked?
    What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
    look in your applications folder - is there an Iphoto application there? If so get info and report the version
    Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
    what else can you tell us that might help us assist you?
    LN

  • In pages, when I make a table, the lines print very faintly.  Any ideas?

    Hello:  when I make a table in Pages, the table will not print well; the grid lines are very faint.
    I get the same result in Numbers. 
    Any ideas?

    Hello.
    You can choose the size of your border in Pages or Numbers.
    To do that, you have to select your table.
    After that, click on inspector.
    You must have the cell borders option, set here the border width.
    That's all !

  • Photoshop and other CC apps go to 'not responding' for 60 seconds on start up due to firewall... any ideas?

    For the last few weeks, Avast Firewall freezes Photoshop CC 2014 and Adobe Media Encoder CC 2014 (and probably others, I have not tested them all) for about 50-60 seconds each time they load.  If I disable the Avast firewall, they load and are accessible right away.  But I cannot find any settings in Photoshop or on the web for ways to allow the Adobe CC 2014 programs through the firewall.  Can anyone help?  I have my network set as 'Private' and 'Friend' enabled and have the Windows firewall off.  I'm using Avast Premium.

    Thanks, but I've tried that, with the entire Adobe directory.  It is definitely a Firewall issue, I can leave the rest of the shields on and it works fine.
    So what I eventually found were the firewall rules in Avast.  There are many auto-created rules that allow things through, but they weren't letting these apps make the contact they needed to run.  Avast has a setting that allows you to let it 'auto-decide' on the access for any apps where the rules don't allow some type of communication.  It works for the most part, but I changed all of the Adobe apps to 'ask me' (some 70 or so entries!).  Then when opening Photoshop, it asked for permission for several services including dynamiclinkmanager and qt32server.  And the same happened for Media Encoder and Premiere Pro, except they each asked for access for their own self-named host program as well.  Now they open without issue.  So I'll leave this here for others who may run into this.
    As a side note, I saw the system trying to use port 2869 in the firewall logs and added an exception for it, but that didn't help.  But the above solved it, at least for now.

  • For the last 48 hrs my note 3 camera will not work..each time I try it freezes and eventually a message"camera not responding" comes up and I am able to exit....any ideas? has there been an update that went wrong?

    has there been an update to camera that went wrong or does anyone know a way to work around this problem..tried power down and on again, even removed battery, still has same problem.

    Go to settings and > into all apps > locate camera app > and do a force stop , >  then clear cache. Do a soft reset of phone.

  • My iPhone 4 used to synch with my pc but the "synch" option now remains grey and is not recognizing my phone. My wife's 3s still can sink. Any ideas

    My iPhone 4 no longer is recognized when I plug it into my pc. However it still recognizes my wifes 3s.  What can I do.

    You may need to reinstall your iPhone drivers. Make sure you connect your iPhone first to the computer then do this, go to "Control Panel" in there look for "Device Manager", once that opens up there should be a USB icon with a yellow explanation mark right click and uninstall the driver. Then reconnect your iPhone and they will install automatically. Hope this helps you.

  • With ios 8.3 ipad mini apps sometimes do not respond when touched

    a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I am comparing two documents. The "Not Responding" event happens for over 30 minutes.

    I am comparing two documents using FM 11 on Windows 7. The "Not Responding" event happens for over 30 minutes. When should I force the application to quit?

    It sounds like your installation is corrupted. I don't know what two checkmarks you mean, but when the Setup Assistant starts it collects some personal information after which it will return you to your normal Desktop. If it isn't doing that, then something is not right.
    I think you will need to shut down the computer, then reboot. If you are able to reboot, then check About This Mac under the pple menu to see what version of OS X it shows is installed. If it shows 10.9.x then do the following:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Spooler is not responding when trigerred smart form

    spooler is not responding when trigerred smart form . To trigger spooler request what are the authorization need to give to user.

    Please read this post then provide some details.  What printer model - there have been hundreds of Photosmart printer models over the last decade? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?  What program are you trying to print from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Itunes keeps not responding when i try to log out of my account

    itunes keeps not responding when i try to log out of my account
    I have tried uninstalling the itunes program and re Installing it but it has not worked,
    Is there anyone that can help me?

    Have you tried leaving it to hang for 5 minutes?

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

Maybe you are looking for

  • How can I save a CYMK PSD file as a PDF in CS5?

    I am able to make the file in CS4 on another computer I use (PC).  However when I try to save a CYMK PSD file as a PDF in Photoshop CS5 I don't see the option in the drop down menu?  Any ideas?  Here are some of the file details CMYK PSD 8 bits/chann

  • Safe Boot with Cocktail installed

    I recently installed Cocktail, MacScan, ClamXav, and SMART Reporter on my MacBook and iMac. Now neither will boot into Safe Mode on a startup or restart by using the shift key. Both machines are working fine but I like to Boot Safe now and then for p

  • Floppy always mounts read-only.

    I've had this problem for a while with arch but it never bothered me. But now I really want to get my hands dirty with OpenBSD and cant bring myself to waste a cd for a 4meg iso. So i have to use the boot floppy. However when i mount any floppy, it m

  • Breakpoints still exist after removal and Teststart over the OI. Why?

    Hi everyone, We have different "user classes"  in Teststand. When I´m logged in as an admin, I delete all my breakpoints and after that I close my file without saving it. It sometimes happen, that someone else (logged in as "technician") starts a tes

  • The sound is flat even with headphones.

    Is there an equalizer or similar way to get better sound? I connect my headphones to an HP get great sound good bass. The Mac Book Pro sounds week and little bass.