Canon MX922 and OneNote

I have a canon MC922 and have been using it to scan documents to evernote. However, I am more impressed with the power and versitility of onenote and would like to migrate over. Can this printer also scan directly to onenote like it does with evernote?

It is recommended that you contact live technical support . There is NO charge for this call. Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year.

Hi nicolej31,
You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer. With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist. Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from. For information on which paper sizes and types to load in each cassette tray, please click here.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

MX922 and Windows 7- 64 bit

I installed a new MX922 on my network. Everything went OK. I used the disk to add the printer to a PC with Vista and one with XP. Those PCs print fine. Whe I tried to install the printer on Win 7 - 64 bit Home Premium, it would only show me the installation guide and would no move on to the actual install driver process. I went to the canon website and downloaded the Win 7 file for the printer and ran through the install process. It found the printer on the network, installed the drivers, and set it as my default printer, but I cannot print with this PC. The job shows up in the que and times out . The print manager says "cannot communicate with printer". The printer shows up in the programs on the control panel. I can scan a page and it will appear on my PC. I just can't print.

Odd.......after two days it's now working.......strange!

How do I install Canon MX922 Fax function, printer works but fax not recognized??

I can print wirelessly using my new Canon MX922 Multifunction printer/scanner/fax. My iMac doesn't seem to recognize the fax function. I would like to be able to send documents straight to the fax without printing them first. Can anyone help?

If your printer supports it, you could try to fax using the printer's control screen (it has to be connected to a landline for this to work). I can fax directly from my Epson using the LCD touch screen and inserting the paper into the sheet feeder.

Black line down middle of copies from Auto Document Feeder. Canon mx922.

When printing copies through te Auto Document Feeder (the feeder on top) of my Canon mx922, a black line appears down the middle of the page. How do I clean the ADF/ fix this problem? Thank you.

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can I print avery address labels from a word template on my MX922 and if so where do I load them?

Just bought a Pixma MX922 and was surprised that I can't find any instructions for printing avery mailing labels from my Christmas list word template. I was able to do this on my MP560 which just died, but it had a separate place to feed avery labels into the printer. This is a Canon question and not an Avery question.

Hello. If your current sheets were able to be used with the MP560, you should be able to use them with the MX922. Please load the sheets in the lower cassette tray. Ensure that the side you are printing on will be facing down before printing. This didn't answer your question or issue? Find more help at Contact Us.

Printing from my macbook laptop to canon mx922 printer

I am trying to connect my MacBook laptop to print to a Canon MX922 printer.
I can connect via USB (and it prints successfully), and I can even send a wireless 'test print' page, however I want to print wirelessly.
I am connected to the wireless router (airport) and I am successfully able to print from an iPhone and iPads without difficulty.
However, this is proving to be very difficult.
Attached picture is the code I am getting when trying to print.
When I click Print, I can see the printer, then I select it, and then it does not let the "Print" button get dark to be selected.
If I click return the attached picture is what I get.
Help!?!?

Hi Pahu,
All connected..thank you for your time in trying to assist.
Have a great day!
Angie

Printer pixma canon mx922

how can i install my printer canon mx922 on my mac without my cd i lost it and i already went to the canon website and download the software but it still doesnt work ...HELP PLEASE

Hi!
To ensure the most accurate information is provided, we will need to know the version of Mac in use (Ex. 10.7, 10.8, 10.9), as well as how you are connecting the printer (USB or wireless). Also, are you getting any specific error messages?
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Having trouble loading MP-101 paper in Canon MX922 printer- seems to not fit cassette. Any thoughts?

Just bought Canon MX922 printer and having some trouble at setup with MP-101 paper fitting into cassette. Seems too wide to fit in. Am I having spatial orientation issues or is this something others have noted? Thanks

I just did the same thing - The "lower" cassette has two parts - see if you can pull another drawer out below the one you tried - the paper does fit in there... the upper one will just fit envelopes it seems. Stealthy lower drawer!

Print on dvd using Canon mx922

I am trying to print on dvd using Canon mx922. Canon software (image garden and photprint ex) do not recognize printer using iMac running 10.7 and macbook air running 10.8. Canon has no solution and referred me to Apple. Anyone have a workaround? Any other software to try?
Thanks.

When you select to add the printer and you see the little pop-up window under the plus button with a heading of Nearby Printers, don't select the MX. Instead, click on Add Printer or Scanner. Then with the Default Add printer window displayed, you should see the MX. It will show something like Bonjour Multifunction in the Kind column. Don't select this one. Instead wait several more seconds and you should see a second MX appear, this one showing Canon IJ Network in the Kind column. Select this and the Mac will state that it needs to get the supporting driver from Apple. Agree to this and after the driver has downloaded, you will have your alternate driver installed and ready to use.

HT201465 update broke Canon MX922 printer

Hi,
I have a Canon MX922 printer (using the Canon MX920 series driver) that I've been using for three months over WiFi. The latest software update HT201465 broke my printer. I've tried resetting the printing system, deleting/adding the printer but nothing works.
Printing over my iPhone (AirPrint) still works, but my Mac can't use the printer for scanning or printing. It does show up as a bonjour printer and I can re-add it without issues, but printing or communicating with the printer doesn't work.
Anybody else with the same problem?
Seems like Apple dropped the ball on this update.
Thanks,
Sebastian

Sebastian-S wrote:
I can't ping or access the printer's webinterface either from my iMac or MacBook - that part makes even less sense to me. There's no access control in place.
If you cannot ping the MX or connect to its internal web page then it explains why you cannot print. What seems odd is that the device appears in the Default view of the Add printer window, as shown by your screen grab. If the restart mentioned above does not help, then confirm that the Mac is set to use the same IPv4 subnet as the MX.
If you leave the Default view of the Add printer window open, do you see another MX922 entry appear with Canon IJ Network, as shown below? This protocol is provided by the installed Canon driver, while Bonjour is part of the Apple system. Since you cannot ping the MX I would expect you don't but just want to check.

My Canon MX922 will not print wireless or wired.

My CANON MX922 printer will not print wireless or wired. I used suggestions in Community such as "MX922 not connecting wirelessly, 7-6-15, post 1362, 10-17-15". (No solution). I worked with a great rep., by phone,for one hour. (No solution). My MG6220 has worked wirelessly, for two years, on the same Lenovo computer with Windows 7. THANKING YOU FOR TAKING THE TIME TO HELP ME.

I tried that and the computer still can not recognize the printer. I used the CD that came with it to reinstall it and all goes well until the very end when the last window pops up and says it can not find the printer.I went and bought a new printer last night Canon MG5622 since it uses the same ink cartridges and I have a lot of of inkI didn't want to waste. This printer installed easily and works great.Not sure what happened with the other one but perhaps I'll pass it to my sister with the CD and see if it will install onher computer.thank you for your help, you're awesome for trying!Diane

Cannot successfully print with new Canon MX922...any secrets?

Need help with Canon MX922 printer and macbook pro. Have followed all canon directions and canot get it to print wirelessly or on any apple device

Hi, tinwhistle. Thanks for sharing with us your concern. Do you have the latest version of the Nokia Suite? Can you also make sure that you have an admin access on your Windows 7 computer, and your firewalls & antivirus programs are disabled. It would also help if your Windows 7 drivers are up-to-date. Keep us posted.

TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades.

Lack of support for Canon G7 and G9. Alternatives?

I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
Best regards,
Kjell Are Refsvik

I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
I don't know much about that cameras, but you may want to investigate.
Message was edited by: rkkwan
Message was edited by: rkkwan

Canon MX922 and OneNote

Similar Messages

Maybe you are looking for