Canon MX922 duplex printing wrinkling page.

When printing 2 sided of a page the first page prints normally.  The page is then pulled back into the printer to print the reverse side.  When the page is pulled back it sounds like it is catching on something and when page comes out it is wrinkled.  Kind of like a wavy look when holding the page up and looking at it from the side.  Initially I had a paper jam and cleared it per instructions by removing the back panel and removing a jammed page.  Every since one sided print works fine but two died printing produces the wavy page.  Cannot see any think causing the problem.  Does anyone have any advice??     

Hi billheston,
In addition to the steps you have already taken, performing a roller cleaning may resolve the issue the printer is experiencing. To do this, please follow the steps located here. If you still experience difficulty, the printer may require servicing; please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Canon MX870 duplex printing problem

    I usually have letterhead paper in my printer tray. And everything used to work fine: if I were printing single-sided or duplex, the printer always printed the first page properly, on the side with the letterhead.
    But ever since I upgraded to Mavericks, it will print single-sided on one side, and page one of duplex printing on the other.
    If I load the paper face up, duplex printing puts page one properly on the letterhead side.  But if keep the paper face up and print single-sided, it will print page one on the back of the page.
    Anyone else experiencing this? Anyone have any dieas how I can fix this?
    Thanks in advance.

    Hello Roger,
    I just tested your symptom on a Canon MG6150 and it appears to be working fine for me.
    I loaded a letterhead sheet face-up into the printers cassette. I then selected to print a single page from TextEdit. The text printed on the correct side.
    I then created a second page in TextEdit document and selected to print. From the print dialog I enabled the duplex setting in the Duplex Print & Margin menu of the Canon driver. With the letterhead sheet loaded as face-up, page 2 printed on the blank reverse side first, and then paper was pulled back into the printer and page 1 was printed on the letterhead side.
    So can you reply with what application you are having the issue with.
    Can you also reply what driver version you are using. I am using v10.89.1.0 which was a recent update. You can check this by opening Printers & Scanners, selecting the MX870 and clicking on Options & Supplies. The General tab will show the version.

  • Canon MF4150 duplex printing

    Hi All,
    Has anyone gotten duplex printing to work on OS X (10.4.9) with the Canon MF4150? They just released a new driver version (1.5):
    link: http://www.usa.canon.com/consumer/controller?act=DownloadDetailAct&fcategoryid=3 35&modelid=14444
    I installed this over the 1.4 version. The two-sided option (on the finishing tab of the print dialog) is still greyed out.
    Canon tech support says that two-sided printing is unavailable on this printer.
    However, someone over at macintouch says that they have gotten two sided printing to work on the MF4150:
    http://www.macintouch.com/readerreports/printing/topic4318.html#apr13
    So, what is the answer. Is two sided printing possible from OS X on the Canon MF4150?
    MacBook Pro 2.0GHz Mac OS X (10.4.9)

    The MF4150 uses the UFR2 driver that is also used on the imageRUNNER copiers, which I already have installed on my 10.4.9 MBP. I added the printer driver and can see that the machine definitely supports duplex printing. As you have found it is located under Finishing > Print Style > '2-sided Printing'.
    Since your option to select this is not available, I'm wondering if it is a detection issue? The UFR2 driver, like the PS driver, cannot be configured via Printer Info > Installable Options. For the iR's, the driver polls the copier to determine what accessories are installed. This is usually done on installation but I have also seen this 'get device info' window appear the first time you try to print. I would try selecting the printer in the printer list and clicking Utility. This will open the UFR2 Print Monitor which will give you info about the printer setup. This may 'update' the driver so that 2 sided becomes available?
    Also, I've had issues with the Canon drivers/ppds where one option is greyed-out due to a constraint. For example, to staple a print job the collate needs to selected. But after selecting this, the staple option is still not available. You have to select another menu item, such as ColorSync, then go back to Finishing to select Stapling.
    A last suggestion would be to delete the driver, reset the printing system and delete the UFR2 folder in Library/Printers/Canon. Then reinstall the new v1.50 driver (which is a Universal version) and add that again to see if it resolves your problem.

  • Duplex prints blank pages at section breaks in MS Word

    Symptom: MS Word prints blanks on the backs of only some pages that should be auto-duplexed, resulting in even pages being printed on odd sides of paper sheets. Probability of problem is greater if one side is portrait and the other landscape.
    Cause: MS Word creates a separate PostScript file for each section. (A section is delimited by a section break.) As each file arrives at the printer, the printer treats it as a new print job and so ejects the previous piece of paper before printing the first page of the next section. If the last page of a section is odd, then the first page of the next section can't print on the back of that piece of paper.
    Microsoft told me it's the fault of the Mac OS. Anybody have insights? Has Apple even acknowledged this problem?

    Next Page section break with different page orientations in the two sections (first section on odd page, next section on even page), is guaranteed to cause the problem.
    But Next Page section break even with the same page orientation also causes the problem, though not 100% of the time. I've not figured out why on rare occasions it does not cause the problem. I've examined the usual suspects--anything requiring the second section to appear on an odd page.
    Even a regular Page Break (not a section break) causes the problem at least most of the time, even though (by definition) there is no page orientation change.
    This is a big problem for me, because I produce 300-page formally structured documents that really benefit from section breaks. I can't expect my readers to manually duplex.

  • HP Duplex prints first page non-duplex?

    I have upgraded to Lion and am experiencing problems printing duplex (two-sided) documents on HP printers (tested on the HP Laserjet 4010 and 9050).  The first page will print non-duplex (one-sided) as if it is a separate cover page. The remaining pages will properly print in duplex format.  This problems occurs when printing both in Word (2011) and printing pdfs from preview. 
    I tried going to the HP website to download the drivers directly for Lion, but it said to use system update for the drivers. Doh! Any ideas?  My brain is starting to hurt. 
    1000 thank yous for whomever can resolve this for me!
    Mike

    You should use Software Update to install the specific driver for your printer. You can also download the full set of drivers from http://support.apple.com/kb/DL907. What version of the HP driver are you using? Please post back if the duplex issue remains after updating the drivers.

  • C4380 duplex printing unrelated pages

    luv the c 4380 & duplex process that simply hangs, draws back and prints the other side....no touch !!But suppose I need to completely customize the backside of that printed page ... perhaps resizing oreven from a different source?Do I need to go manual moving paper around ..if so..how...or is there a new driver or feature that will let me specify instructions, sizing, scaling, landscape or portraitPAGE by PAGE that I missed somewhere .. and if so, say I am working in Excel spreadsheet to printgraphics...can I save that process once perfected as part of the printing instructions of that file or is therea separate process I need to turn on or activate to do the same thing again the next time I need it?Help!!Many Thanks,Jim [email protected] 

    This kind of question was already asked and answered.
    Assuming that there is really a problem between Pages and you printer driver, print the standard way in a PDF.
    Then, print the PDF in Duplex mode.
    Yvan KOENIG (VALLAURIS, France) mercredi 22 juin 2011 13:42:30
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own
    before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Improvement request - duplex printing different page sizes

    I have scanned sheet music to PDF and then trimmed the margins for best display on my tablet. This means some pages are different sizes (but all are smaller than 8.5 x 11).
    I combined one such PDF into a larger PDF of all 8.5 x 11 pages. When I print duplex, the pages that are less than 8.5 x 11 print out single sided instead of duplexed. It does this regardless of the size option (fit, actual size, or shrink) that I choose.
    I consider this to be a bug. It is already properly centering the less than 8.5x11 pages on the output paper, so it should be able to duplex them even though they are different sizes in the PDF. I would like to see this fixed.
    Installed Acrobat:
    Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
        Version: 10.1.9.22
        Creation Date: 2013/12/18
        Creation Time: 2:42:34 PM
    Windows 7

    This is a user forum; there us no guarantee that any Adobe staff ever sees your post.
    Please file bug reports or enhancement requests at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Problem with duplex printing - alternate pages upside down

    I have been trying to print 2 per side, double sided from Adobe Reader. I have tried this as two up, duplex and also as booklet printing. Whatever I do, the second side is upside down. "Flip on long/short edge" appears to make no difference.
    Trying to resolve it in the printer properties is worse: Adobe Reader seems to override them and I get single sheets single sided. If I select both "two sided" in the Reader dialog and "Duplex" in the printer dialog, the second side overprints the first side (but is the right way up!.
    I am using Reader 10.1.2 with Windows 7 and an HP Deskjet 6980 printer with duplex unit using the Windows 7 default drivers. I have installed the "AdobeReaderPatch10.1.2_cpsid_92870.zip".
    There must be a combination of settings which works! Can anybody help? Please?

    TThat is my problem also. You are flipping to the long side, you need to flip to the short side. I order to get the back one to be right side up. I was able to get windows 8 to do that today without doing anything beside selecting landscape and flip to short side. But when I use my iPad I donot have that selection. I need software to be able to have that option.

  • My Canon MX 892 prints blank pages.

    For a couple of days my MX 892 colour printing has been wrong - too much yellow. Suddenly, this morning it prints completely blank pages. It behaves as though it's printing ok but not a drop of ink. The tanks are ok and I've deep cleaned the head and reset all settings but I still get no ink on the paper.
    Any advice would be appreciated
    Canebee

    I have exactly the same issue with same printer on my brand new iMac. Quite disapointing !

  • Duplex Printing - Odd Page Issue

    I'm using the following logic to avoid printing subsequent form's details on previous one, it seems to work fine in most of the cases but for some of the data input the logic is not working, I've placed some debug statements and found out that at the time of layout ready event pageCount%2 == 0 is yielding an even number so the logic is going into else block but when the form is rendered finally I'm not getting the total page count as even. I'm not sure asto why there is a mismatch between pagecount at the layOut ready event.  Have any of you guys run into the same issue? I appreciate any suggestions.
    if(pageCount%2 == 0) {
        //even, show the blank page to shift the trailing page down to an odd page number
        form1.blank_page.presence="visible";
    } else {
        //odd, hide the blank page as the trailing page is already on an odd page number
        form1.blank_page.presence="hidden";

    Hi
    You may check these threads first:
    Print problem invoice from 2e page with border around the text
    /message/7371963#7371963 [original link is broken]
    Re: Printing problems with HP Laserjet P2015DN
    It is a printer driver compability issue.
    Thanks,
    Grodon

  • How do I install Canon MX922 Fax function, printer works but fax not recognized??

    I can print wirelessly using my new Canon MX922 Multifunction printer/scanner/fax. My iMac doesn't seem to recognize the fax function. I would like to be able to send documents straight to the fax without printing them first. Can anyone help?

    If your printer supports it, you could try to fax using the printer's control screen (it has to be connected to a landline for this to work). I can fax directly from my Epson using the LCD touch screen and inserting the paper into the sheet feeder.

  • Problem in smartforms - Duplex printing

    Hi,
    I am trying to use a smartform for duplex printing of pages.I have the following pages.
    FIRST and OTHER are pages with the same main window
    I have also created pages BACK and LAST which is used to print on the reverse page.
    Page  ->         Next page   ->   Mode           ->     Printmode
    FIRST  ->      BACK     ->        Initialise counter      ->     D  ( Duplex )
    BACK   ->     OTHER      ->       Increase counter     ->      Blank
    OTHER  ->    BACK     ->      Counter unchanged ->      D
    I have created a command in MAIN window to call the LAST page
    LAST  ->     blank     ->   Counter unchanged         -> blank
    I tried to print a document with 8 pages ( ie., 4 front page and 4 back page ) in a duplex printer.
    Pages 3- 8 are printing fine with print on both sides. But page 1 and page 2 are getting printed in different pages.  Any idea what is the issue with the first 2 pages?
    Thanks and Regards
    Suba

    Hi Suba,
       when ever we want to print back side of a page, we need to assign "D" for the
       page we wanted to print on back side.
       for ex: there r 2 pages, first page and second page .
          1) if we define "D" for first page then it will print second page on back of first
              page.
          2) if we define "D" for both, then second page will start from new page(won't
              print on back side of first), but it can print second page both sides.
       in ur case,u defined FIRST and BACK pages as "D", but OTHER as default.
      so remove Page mode "D" for BACK page.
      hope this solves the problem.
    Thanks
    Dinakar.

  • WIA support for the Canon MX922

    Is there a WIA driver for the Canon MX922 multifunction printer? It doesn't respond to my version of Photoshop which requiresa scanner that is WIA compliant.

    Hello.
    The MX922 uses a TWAIN driver for scanning.
    For many of the latest versions of Photoshop, a TWAIN plugin would have to be installed in order to use a TWAIN scanner with the program.  Please visit www.adobe.com for information on how to update the plugin for your version of Photoshop.
    If additional assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

    My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year. 

    Hi nicolej31,
    You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer.  With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist.  Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
    You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from.  For information on which paper sizes and types to load in each cassette tray, please click here.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Auto duplex printing on MX922 won't double side print PDF's that my old MP560 did. what can I do?

    My MP560 got the dreaded B200 code, meaning get a new printer. Hesitated to buy another Canon, but the MX922 had all the features I was looking for. Easy set up, but first problem was printing from the internet, 922 wanted to use paper in the top tray not the letter size in lower try. Had to save doc. as PDF then print that, 560 did this without any extra work. Auto duplex is way to complicated and haven't got it to work yet. 560 duplex print was selected from print dialog box. Anyone have any helpful suggestions. I am thinking of returning the printer.

    This YouTube video solved the problem for me.
    https://www.youtube.com/watch?v=HB4LbWcsEFg

Maybe you are looking for