Canon pixma does not support printing 4 photos per sheet:

Looking for download commercial software to allow 4 photos (3.5 x 5) per sheet on canon pixma 7120 with macpro
thanks
stephenlco

Hi stephenlco,
The software My Image Garden that was bundled with your PIXMA MG7120 will allow you to print 4 photos per sheet.
To use My Image Garden, please follow these steps:
1. Open My Image Garden.
2. Select the photo that you wish to print.
3. At the bottom, please select New Art and then click on Photo Layout.
4. In the Theme List, select the layout that you wish to use and click OK.
5. Make any desired changes and click Print.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

My CS5 program does not support CR2 photo taken with Canon Rebel T5i. Why?

My CS5 program does not support CR2 photo taken with Canon Rebel T5i camera. Why?

If you take a look at the following charts, you will find that both the S110 and the T5i are not supported in CS5, both cameras require photoshop CS6 with a camera raw point upgrade, Photoshop CC or Lightroom 4.3(s110) 4.4(T5).
Camera Raw plug-in Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Photoshop CC indepth : camera raw - Supported cameras for plugin and lightroom
http://www.adobe.com/products/photoshop/extend.html
Camera Raw-compatable Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

My C3 model does not support internet as per MTN

Dear sir
I bought my new Nokia C3-00 yesterday, and i brought my phone in sudan, here in this country i am using MTN network(mobile operator), i asked to MTN to send the GPRS settings, then MTN customer care said my Nokia C3 does not support internet,
can somebody tell me, is my mobile is faulty or internet on C3 work only in india?

So how do i actually config the airport so it runs on my operating system?
Once you configure the older AirPort using the Mac running Leopard it will operate fine on your network.
The rub is that the Mavericks Mac cannot be used to configure or make any changes to the older AirPort once you have it set up. So, if the Express needs more help later, you will need to borrow the Leopard Mac later to fix things up again.
That Express that you have is at least 8 years old....probably older.....and most of these devices go for about 5-6 years, so you are way ahead of the game. A new Express, when you are ready, will work fine with Mavericks.

HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?
paul.kelly

Hi Steve,
No expert, but since nobody else has piped in...
Did you setup the DNS Server IP?

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

iPhoto does work and there is an upgrade:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos > Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Thanks Larry. That certainly gives me some understanding. Can't imagine I'm the only Aperture user with that concern, so I certainly hope Adobe and others will fill the void. Without that feature, Photos is pretty much a non-started for me.

My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

You would need Camera Raw 7.3 or later to open those files. Adobe is not going to update CS4. You can either get a newer version of Photoshop that comes with a current version of Camera Raw, or you can use the DNG converter to save your files down to the ACR version that works with CS4.

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

HT204655 Photos for Mac does not support semi professional camera Nikon D7000!

Since Nikon does not support USB storage mode, the (semi)professional line of Nikon cannot be used to import pictures!!
This is a serious flaw in the program. Aperture supports Nikon D7000, Image Capture supports the camera but the latest and greatest has forgotten all about supporting market leader's camera's?
The main and only reason NOT to use Photos... Or did I miss something here?

Sorry guys, forget all about it. I switch my camera off and on again (while it was connectoed to the Mac) and it appeared in Photos.
No idea what happened, but I can import my pictures.
Cheers,

IPhoto does not support Canon Powershot S45 RAW Format

Hi,
It seems iPhoto does not support Canon Powershot S45 RAW file format. Can this be added to be supported!?
Does anyone know how to report this to Apple and request this as a feature enhancement?

Or this link: http://www.apple.com/feedback/iphoto.html

Iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

You actually need to give information to get help - just stating an abstract problems (which is most certainly not a problem at all) gives the volunteers hearer nothing to work with to help you
What version of iPhoto? Of the OS? What exactly is the problem (iPhoto does support the resolution of your camera so that is NOT a problem)? what exactly are you doing? What error messages do you get? why do you incorrectly think that iPhoto does not support full resolution?
At this time your question is like my car won't start - why not? Could be anything from you did not put the key jun to being out of gas to having the engine stolen - no way to tell anything - except that the problem you claim is not true (at least in my example I would know that the car did not start)
LN

I have lightroom 4.4 and it does not support Canon EOS 70D what to do?

I have lightroom 4.4 and it does not support Canon EOS 70D raw files. What do I do?

Several choices
Download the free Adobe DNG Converter version 8.5 and convert your RAWs to DNG and import those into Lightroom
Use the software that came with the camera to convert the RAWs into TIF and import those into Lightroom
Purchase the upgrade to Lightroom 5

How do I print wirelessly from an iPad to an HP 6500 wireless printer (it does not support AirPrint )

How do I print wirelessly from an iPad to an HP6500 wireless printer? It does not support AirPrint

HP offers an app in the App Store that may work with that printer.
http://itunes.apple.com/app/hp-eprint-home-biz/id299531647?mt=8
If not, post back and include the operating system version on your computer and we'll go from there.
Regards.

Yosemite 10.10 software does not support Advent printer software-why?

Yosemite 10.10 software does not support Advent printer software-why?
Cannot use printer until resolved-help!!

Did you ask Advent? It's not on the supported list:
OS X: Printer and scanner software available for download - Apple Support
You could try the "sandboxing relaxed" workaround offered here for other manufacturers, but Advent needs to update their drivers.
kodak printers and Yosemite

Canon pixma does not support printing 4 photos per sheet:

Similar Messages

Maybe you are looking for