Canon PIXMA iP 1500 not compatible with 10.6

This printer is no longer supported by Canon. If you have Mac OS of 10.2/10.3/10.4 or 10.5 you are O.K. otherwise Max OS X will not work on your 10.6 version.

None of the Canon drivers, even the latest versions, can be used when you want to connect via a Windows share. This is due to a limitation in the Canon. It was the case with previous versions of OS X and is still the case with 10.6.
When you have the printer shared from Windows, you need to use a CUPS based driver, such as those offered by Gutenprint or PrintFab.
Gutenprint is the preferred choice, because it is free. However not every model of Canon is supported with Gutenprint (such as the iP1500) so this is why you sometimes need to purchase PrintFab, which does list the iP1500 as a supported model.
Pahu

Similar Messages

I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd so I need new software. Any ideas?

Hi. I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd (I'm very disappointed about that.) The photos are stored in my iphoto and I can burn a dvd using idvd but there is no audio So.... I need new software. I have a Mac OS X 10.5.8 and my digital still camera is the Canon Cybershot These are home movies of my kids and the viedeos are precious. Thanks in advance!

Canon Cybershot
I can't trace a camera of that name. All that comes up is either the Sony Cybershot or the Canon Powershot!
Please confirm excactly what camera you have, and what version of iMovie.

Canon pixma IP4000R will not work with Snow Leopard

After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon. There are multiple problems ... the first thing I noticed is that not all of the printer options are available on the print dialog. When I tried to print, I got "fatal::internal error -9660."
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Anyone have any ideas? Other than buying a new printer ...
nojp.co.canon.bj.print.PrintSettings.BJThrougoutPage..b. media=na-letter PaperInfoIsSuggested..b. pserrorhandler-requested=standard sides=one-sided job-uuid=urn:uuid:f3c1ff27-c401-385e-4a60-d6659c8dcfff job-originating-host-name=localhost time-at-creation=1289542148 time-at-processing=1289542149 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 Duplex=None PageSize=na-letter"
D [12/Nov/2010:00:09:10 -0600] [Job 5] argv[6]="/private/var/spool/cups/d00005-001"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[0]="<CFProcessPath>"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[11]="[email protected]"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[12]="SOFTWARE=CUPS/1.4.5"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[14]="USER=root"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[17]="IPP_PORT=631"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[18]="CHARSET=utf-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[19]="LANG=en_US.UTF-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[20]="APPLE_LANGUAGE=en-US"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[21]="PPD=/private/etc/cups/ppd/iP4000R_00_00_85_4f_d4_8e.ppd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[22]="RIPMAXCACHE=8m"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[23]="CONTENT_TYPE=application/pdf"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[24]="DEVICE_URI=file:///dev/null"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[25]="PRINTER_INFO=iP4000R (00.00.85.4f.d4.8e)"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[26]="PRINTER_LOCATION="
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[27]="PRINTER=iP4000R_00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[28]="CUPS_FILETYPE=document"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[29]="FINALCONTENT_TYPE=printer/iP4000R__00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 4367)
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] PrintJobMgr trying ppc architecture...
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] fatal::internal error -9660
D [12/Nov/2010:00:09:10 -0600] [Job 5] End of messages
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state=3(idle)
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-reasons=none

Liz Gensheimer wrote:
After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon.
The driver version provided by Canon is v10.26.x while the update provided by Apple will increase the version to 10.30.3.0. The v10.26 and v10.30 drivers provide all the features that the previous v4.8.3 driver for OS X 10.5 and earlier provided. However the layout for these menus is definitely different.
Also, a lot of user who upgrade from a previous OS X may not realise that the default print dialog is in a minimised view. You need to press the disclosure triangle next to the printer name to get the expanded view.
When I tried to print, I got "fatal::internal error -9660."
I suggest you try a printer reset.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your iP4000R print queue but not the printer drivers. So you will only need to add the queue again.
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Yes they are both CUPS by name as they are both made by Canon. But this is not your issue. If you believe that a particular option is not available then please reply with what that is.

Canon pixma mp500 scanner not working with mac osx 10.6.8

I'm having difficulty using my scanner. I've updated the Canon driver with the most recent version. It recoginises the printer/scanner but won't import image. Has anyone had a similar issue and successfully resolved it?

duncan, I've got an MX 880 series all in one printer, and have the same issue. A work around that I use is to select "e-mail" the scanned item. The scanned item is then inserted into an e-mail format where I can choose to download/save the scanned document into whatever folder I want. This was the only expedient method I could find. The Canon software capability between some of their newer printers and Mac operating systems is not totally compatible. For example, sometimes the top half of a line of text gets printed on one page, and the bottom half of the line gets printed on the ensuing page. Doesn't happen often, but it is annoying.
Wuz

Canon Pixma MP520 does not work with Airport under Leopard

Before this printer MP520 worked without any problem.
After installing Leopard, I can print through USB but not through Airport.
I installed all latest updates for Leopard, firmware for Airport and even the latest Canon driver.
I can see the printer in my Bonjour list. Then it looks like it's connecting and then an error window pops up. Error A 306, print attempt failing.
I also restarted Airport with and without printer connected.
Any hint is welcome

Resolved after complete re-installation of MAc OS X

My canon isensys 4430 printer not compatible with windows 8

Hi guys, please can i get some help. I have a new laptop running windows 8, and my isensys 4430 printer will print but not scan. What can I do

Try install MF Toolboxhttp://www.canon.cz/support/consumer_products/products/fax__multifunctionals/laser/laserbase_mf_series/i-sensys_mf4430.aspx?type=download&softwaredetailid=tcm:126-1047366

Canon T3i download cable will no longer work after 10.10 download. Plugging the cable into the 15 inch laptop says not compatible with software. Was fine before the 10.10 upgrade.

10.10 is installed. Now when plugging the download cable in from my wife Canon T3i camera to my wifes 15 inch Apple laptop it says not compatible with the software. Worked fine before the 10.10 upgrade. However I CAN download my pictures from my Canon 6D camera to MY 15 inch Apple laptop.....

I have a DSC-T1 Sony camera. I also have a Panasonic video camera with a built in digital camera. I just took some shots with the Panasonic. Plugged it in, and it worked perfectly. iphoto opened and did what it was supposed to do. I then tried the Sony and nothing happened again. Maybe this is a problem with the mac not recognizing certain cameras...?????
Macbook Pro 15" Mac OS X (10.4.6)
Macbook Pro 15" Mac OS X (10.4.6)

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Assuming video is not compatible with compiz-fusion...?

I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
[root@myhost ~]# fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
(fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
* KWin is already running
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
* Setting window manager to KWin
I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x. Both detect "sis" as the video driver. Listing below...
Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
Thanks for any advice.
Rick
xorg.conf.sis generated with "#hwd -x"
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "sis"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf generated with "#X -configure"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "1033"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # 
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # 
#Option "PDC" # 
#Option "PanelDelayCompensation2" # 
#Option "PDC2" # 
#Option "PanelDelayCompensation1" # 
#Option "PDC1" # 
#Option "EMI" # 
#Option "LVDSHL" # 
#Option "ForcePanelRGB" # 
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # 
#Option "CHTVLumaBandwidthSVIDEO" # 
#Option "CHTVLumaFlickerFilter" # 
#Option "CHTVChromaBandwidth" # 
#Option "CHTVChromaFlickerFilter" # 
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # 
#Option "CHTVContrast" # 
#Option "SISTVEdgeEnhance" # 
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # 
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # 
#Option "SISTVColorCalibFine" # 
#Option "SISTVColorCalibCoarse" # 
#Option "SISTVXScale" # 
#Option "SISTVYScale" # 
#Option "TVXPosOffset" # 
#Option "TVYPosOffset" # 
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # 
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # 
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # 
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # 
#Option "XvDefaultBrightness" # 
#Option "XvDefaultHue" # 
#Option "XvDefaultSaturation" # 
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # 
#Option "XvChromaMax" # 
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

I updated my Mac Book Pro to Yosemite, now to says it's not compatible with my Cannon copier. Any idea how to fix this problem?

I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again? Thanks for any help!

If MF4150 is correct...
http://www.usa.canon.com/cusa/home
search MF4150
click >Drivers & Software
Verify or choose Yosemite 10.10 - then click the [+]
Again verify Yosemite > click agree > click [DOWNLOAD]
The rest should be self-explanatory
ÇÇÇ

I have PSE13 on my system. It was functioning properly and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to c

I have PSE13 on my system, Windows 8.1, 64-bit. It was functioning properly after installation and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to check your printer settings before printing." and then this statement: "Default printer could not be opened." I have reloaded drivers for both printers and made any upgrades possible. It was working fine before and now all of a sudden, nothing. Would prefer to have old PSE v.12 back, it worked with no problems.

See this thread
My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

I want to use my canon pixma ip4500 as my printer with my good ole G4. I need a driver. Is there an easy way to get that or is my G4 too old?

I want to use my canon pixma ip4500 as my printer with my powerbook G4. I need a driver but was very confused with how to get one. Is it possible and could someone come down to my level and tell me step by step how to do it? Many thanks.

Nope, your PB is not too old.
Here is the link to the PIXMA ip4500 drivers on Canon's site:
Drivers & Software
The page has you first select your version of the Mac OS (10.4) from the pull-down "Chose Operating System" menu. Once selected, you'll see the available software, Click on the arrown next to "Drivers" and it should look like this:
(click image to enlarge if needed)
Click the word "Download " and you'll get the driver.
Note at the top of that image there are other links to other documents pertaining to this printer. If you click on "Brochures and Manuals," while you are on that web page, you'll have Canon's instructions, probably better done than by anyone here other than someone who has the same printer model on a Mac running OS 10.4.

Print Studio Pro plugin is not compatible with Photoshop Elements 12 Editor for Mac

It appears that the latest version of Print Studio Pro PlugIn is not compatible with the Editor version of Photoshop Elements 12 for Mac as available on the App store. The install gives an error saying that it did not find a supported version of Photoshop Elements. This error has been reported before for Elements version 12 but was reportedly fixed in the latest version of Print Studio Pro. Now it appears that this version may support Elements 12 for Mac but not the Editor only version from the app store. Any suggestions for work-around on this?

"Any suggestions for work-around on this?"
No!
Not untill Mac and Adobe and Canon get their collective acts together. Mac (Apple) has the bad habit of upgrading their stuff and not being forthcoming with the particulars given to 3rd party companies like Canon and Adobe.
Besides the cost difference of Mac's the compatibility issues are it's worst features.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Hi, photoshop crashed and the file I was previously working in on the same version says Could not complete your request because the file is not compatible with this version of Photoshop. I'll appreciate any help. Thank you.

hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Canon PIXMA MP140 Scanner not working in Windows 7

I have been having problems in getting the Scanner function to work properly in Windows 7. This is the message I receive everytime I try to scan or preview a scan in Windows 7:
Cannot communicate with scanner.
Cable may be disconnected or scanner may be turned off. Check status.
Scanner driver will be closed.
I have installed the latest drivers from the Canon Support website. I have even tried installing the latest Windows XP driver in Windows 7 with no effect. I have also tried using a different USB Cable and connected the USB Cable to a different USB Port on my Computer with no luck.
The Scanner works fine in WIndows XP SP3. I upgraded my Computer to Windows 7 SP1 and now have a problem with the Scanner.
Any ideas? It is supposed to work in Windows 7 I've checked the Canon and the Microsoft website which both say that its compatibie.

This printer/scanner is NOT compatible with Windows 7 32-bit.
I tried installing the latest MP Driver v1.06 and the MP Navigator 3.1 software in Windows XP compatibility mode and Windows Vista compatibility mode.
I even tried using the MP Driver v1.00 and MP Navigator 3.1 software (provided on the CD-ROM that came supplied with the printer) in Windows XP compatibility mode and Windows Vista compatibility mode.
I only had slight success with the MP Driver v1.00 which comes supplied on the CD-ROM with the printer.
When I installed this driver in Windows XP compatibility mode, it wouldn’t scan in MP Navigator 3.1 at all but in Windows Fax and Scan it would let me preview a scan then complete a full scan. But would then refuse to preview or scan anything else after that unless I turned the printer on and off and restart the computer.
This is obviously a driver compatibility problem with Windows 7.
I’m amazed at how Canon has tried to pass this printer/scanner off as being compatible with Windows 7 when it clearly isn’t. I know it works with Windows 7 64-bit but lets face it most people are using 32-bit systems not 64-bit.
It looks like there hasn’t been any proper testing done by Canon. Its poor form from Canon and the lack of replies in this thread is deafening. Seeing as this is the official Canon forum I was hoping there would be at least 1 or 2 replies saying try this and try that but I’ve tried everything there is to try at my end and I’m at a loss at what to try next.
I won’t be buying any Canon products in the future because of the poor after sales service and outright lies about compatibility of one of their products with newer Operating Systems. My next Printer/Scanner/Copier all in one will be an Epson or a HP.

Canon PIXMA iP 1500 not compatible with 10.6

Similar Messages

Maybe you are looking for