Canon Pixma ip 1600 and Pixma ip 4200 and AE

Does anyonw have either of these (Pixma ip 1600 and Pixma ip 4200) printers that work with the AE as a wireless printer server? I was thinking about buying one of them, but these printers with AE are so finnicky.
thx roger

What time frame are you thinking about? The Canon web site also lists the iP5200r, which, like the iP4000r, will have networking built in. From various shopping sites it looks like it will be out late Sept.
Iterestingly Best Buy already has the ink tanks for the new Canon printers at about $2 more than the ink tanks used by the iP4000. So you might want to get the iP4000r.

Similar Messages

Canon pixma ip 1600 driver

Need driver for Canon Pixma ip 1600 running on Windows Seven 64 bit

Hello JayDee,
Canon does not provided a driver for the iP1600 that supports your current operating system. To install your printer on Windows 7 (x64), please follow the following steps below:
1. Click the Start button, Devices & Printers.
2. Click Add a printer.
3. In the Add Printer Wizard, select Add a local printer.
4. On the Choose a printer port page, make sure that the Use an existing port option button and the recommended printer port are selected, and then click Next.
5. On the Install the printer driver page, click Windows Update, and then wait while Windows downloads the available drivers.
6. Complete the additional steps in the wizard, and then click Finish.
The printer will be installed. Then you can download and install the Add-On Module for your Pixma iP1600 from our website.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to use canon pixma MX377. I can't receive and send fax messages

Can please anyone send me complete instruction manual in english for my pixma canon MX377 machine because I can't receive and send fax messages. I'm connected to a PBX extension line or a xDSL splitter. Every time i called a person on the machine, I can hear him but he can't hear me. Thank you very much.

Hi rgc,
The PIXMA MX377 user's manual is available in an online format and can be downloaded from the Canon Asia website. The following link will take you to the Manuals page for the PIXMA MX377:
http://support-asia.canon-asia.com/P/search?model=PIXMA+MX377&filter=0&menu=manual
Once on the page, please scroll through the list and select the manual that corresponds to your operating system (Windows or Mac), then click the DOWNLOAD NOW button on the following page that appears to download and view the manual.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Macbook Air: connecting Canon Office All-In-One PIXMA MX330 printer

I purchased my Macbook Air a few months ago, and I selected theCanon Office All-In-One PIXMA MX330 printer to go along with it. I have tried to install the printer a few times in various ways. Initially, I used my Macbook Air superdrive to attempt to load my new printer with the included disk. However, installation requires that the printer be connected to the Macbook via USB. Since the superdrive was occupying my only USB, I tried to connect my printer wirelessly with another computer. The laptop I used was not a Mac, and I simply could not get his computer to recognize the disk for my Macbook. So I tried something else; I borrowed my school libraries USB splitter in a last attempt to connect them both to my Macbook Air at the same time. However the superdrive does not react when not directly connected to the computer...
In short, I cannot find a way to connect my Canon Office All-In-One PIXMA MX330 printer to my Macbook Air.
Help?

Connect the SuperDrive to the computer, use the Disk Utility in the /Applications/Utilities/ folder to create an image of the installation disk, disconnect the SuperDrive, plug in the printer, and install the software from the image.
(44558)

What is the difference between Satellite Pro 4200 and 4300 series?

As mentioned in another thread, I have a SP4220XCDT that died on me.
I bought a mobo from ebay which was from a 4290, and today it arrived, but the problem was that it has a seemingly fixed CPU, which stands out much less from the board than the one on the 4220 board, and therefore does not connect with the cooling mechanism from my 4220.
At least something comes on when I start up now, but unfortunately it doesn't get past the Toshiba screen which tells you to press F2 for boot sequence.
Having also spent money on memory and a new cpu, I don't want to let this one go, and have seen a motherboard available suitable for a 4320/40/60 - anyone know if this will fit in with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the 4220 mainboard.
I'm assuming that these might be compatible since I have managed to find a pdf of a service manual which covers both the 4200 and 4300, although unfortunately the first page is missing so I dont' know if that highlights any differences.
It's frustrating that there are no pdfs available for these older models, at least with specs on them, and it's very hard to find any info.
As usual, thanks for any help!

Hi
As far as I know both series uses the Intel Mobile Pentium III microprocessor with MMX?Technology.
I found out these details:
Satellite 4260 Series: Mobile Pentium III 450MHz
Satellite 4270 Series: Mobile Intel Celeron 500MHz
Satellite 4280 Series: Mobile Pentium III 500MHz
Satellite 4320 Series: Mobile Pentium III 600MHz featuring Intel SpeedStep Technology
Satellite 4340 Series: Mobile Pentium III 650MHz featuring Intel SpeedStep Technology
The notebooks measures should be also the same. So in my opinion it should be possible to use the same motherboard in Satellite Pro 4200 and 4300.

Canon 650D doesn't support FCP 7 log and transfer...

Canon 650D doesn't support FCP 7 log and transfer...
anyone know how to solve this problem? thanks alot

Download and install the latest version of the E-1 plugin from Canon’s website here:
http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digita l_slr_cameras/eos_rebel_t4i#DriversAndSoftware
If this didn't work, follow this creativecow post to modify cameras.plist file; if there's still no go, follow this guide to either modify the .plist file or convert your footage to Apple ProRes, the native editing format of Final Cut Pro.
Hope this helps
John

Floppy Disk drives for Satellite Pro 4200 and 4300 series

I have four Satellite Pro laptops - a 4340, a 4310, a 4270 and a 4280 and I'm having difficulty getting the 4310 and the 4270 to recognise a particular FDD. My understanding was that Mitsumi D353G FDDs were compatible with these 4200 and 4300 series laptops but I can't get the 4270 and the 4310 to "see" them. They will both however "see" an alternative FDD I have - a Pansonic JU-226A202FC but I only have one of them and two laptops needing a replacement FDD. I have tried a D353G that I know works (from my 4280) in both the 4310 and the 4270 but to no avail. I'm keeping an eye out for another Pansonic JU-226A202FC FDD on ebay but no luck so far. It's so frustrating as I'm sure a D353G FDD should work in the 4270 and 4310 and I have two spare ones which I wanted to use. I've looked in TSETUP.exe and can see no settings I can change to make these laptops see the D353G FDDs so any help or insight greatly appreciated. Does anyone out there have a 4270 or a 4310 successfully running a D353G FDD or, is this a quirk and these two particular models were only made to work with a Pansonic JU-226A202FC FDD not the D353G FDDs? Any clues?

Hello
Unfortunately I am not technician but I assume that there is obviously some problem with compatibility. It is possible that pin assignment is different and you can not use them. If you want to have a precise explanation you should contact technicians. I am pretty sure that they have motherboard schemes and can give you a proper explanation and advice how to handle with this problem.
Good luck!

Have Canon 7d MK2 and Photoshop Elements 12 and I cannot open my RAW FILES

I have a CANON 7D MK2 and PHOTOSHOP ELEMENTS 12 and I cant open my RAW files

The 7D Mark II requires ACR plug-in 8.7 which came out after PSE13 was the current version so you can upgrade or use the DNG Converter 8.7 or newer to create DNGs from the CR2s and those DNGs will work with the older ACR plug-in versions.

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2. I have been told it is a codec clash?

jamesb
Premiere Elements 13 Windows 8.1 (assumed 64 bit).
From what I have read, the Canon XF100 uses the MPEG2 Long GOP video compression, however it uses a MXF file extension (container/wrapper format).
Premiere Elements (any version) does not support MXF files.
Based on existing information, you would need to convert the MXF file to another format which is supported by Premiere Elements.
Apparently lots of the MXF converters available online.
Have you been there and done that?
ATR

I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem.

I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem. Not sure what to do next.

It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one. Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware

MCU 4200 and Polycom CX5000 roundtable Cam

Hi outthere!
We are using Cisco MCU 4200 for Sametime Audio/Video.
Some of our customers would use CX5000 from polycom in roundtablemode.
The camera sends a stream with 1056x144 but the MCU can't deal with this format.
Has anyone any idea how to integrate CX5000 Polycom and use MCU 4200??
Thanx for help!!

Hi outthere,
There's at the moment no change to use CX5000 with MCU in roundtablemode.
Unfortunally, but I have to accept it.
cheers
Martin

E 4200 and not possible to view IPTV on computer

Hello!
Maybe someone could help me with my problem.
I have bought Linksys E 4200. I'm connected up by protocol PPPoE by my provider, but IPTV doesn't work on my computer.
I use the program IP-TV Player and/or VLC Player and both don't work. I only see the list of channel, but any channel doesn't load. Before I used the router DLink Dir 300, and everything was Ok.
Could you give me some advise how I can tune my router.

Two ways to check the IP address for IPTV.
a) On the TV, go to network settings
b) From your router, check the DHCP table of the clients, if your TV is connected to your network, its IP should be listed.

Ti 4200 and Red Alert2

Does anyone have a problem with Red Alert2 and it's add-on?
I've just put it back onto my new system (XP1700, Ti4200 128M, Windows XP SP1) and it plays very jerky. I played it with the drivers that XP put on and with 41.09 and they both have the same effect.
When I last played it I had a Celeron 500 and Geforce256 and it played much better than this.
Unreal tournament at highish resolution and high details plays well with no stutters so I think my system is OK.
I've read a passing comment that the 40 series drivers have problems with directx 7 games but can't find anything of substance on the web. However, this doesn't take in to account that the game doesn't work well with XP's original drivers.
Anyone have any ideas?

try the xp fix here
http://www.cncnz.com/downloads/redalert/patches.shtml

Canon Pixma ip 1600 and Pixma ip 4200 and AE

Similar Messages

Maybe you are looking for