Canon PIXMA MG6320 driver - Print problem

Canon PIXMA MG6320 driver - New printer, Windows XP Pro and Excel 2000 - printing 4 into 1 only prints the first page and preview print prints all of the pages while displaying the preview.  Tried it with administrative rights and had the same problems.  
Any thoughts or suggestions?
Thanks  
Tried reinstalling driver from the Canon website, the problem remains.

Hi Rhinomopolis,
The actual page that is printed should appear just like the print preview.  If there is a mismatch between the print preview and the final output, it could be related to a setting on the printer or some other type of issue (out of ink, for example).  If the page does not appear properly in the print preview, review the settings in your printing application and try again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Canon Pixma Pro-10 printing problem

    Hello,
    I had my printer for little bit over a year, with no problems, until recently.
    I am still using the same paper, which is Ilford Gold Mono, but it happened on several other papers as well.
    Basically, it seems that carriage grabs the edge of paper and moves it a bit, which creates the effect- see example attached.
    I called the Canon service, but since printer is out of 1 year warranty now, they kicked me back to local repair shop.
    I am still hoping that I myself can do something to fix this.
    Any advice would be appreciated.

    Nobody, hah? 
    Thanks anyway.

  • Canon Pixma MP500 wireless printing problem

    I've got this USB printer connected to an Airport Extreme base station. Wireless printing used to work fine, but doesn't anymore. I ensured that printer sharing is set in the Airport admin utility. Yesterday I spent about 30 minutes with a guy from AppleCare trying to troubleshoot this issue to no avail. Printing works fine if I plug the USB cable into the Powerbook. I'm using Canon-supplied drivers. But that was also the case when wireless printing used to work. So this problem is a bit strange and frustrating.
    My guess is that some security update or change in the OS is causing the problem. The Apple guy agreed, though he had no idea as to what the specific issue might be. Any ideas or help would be appreciated.
    Thanks,
    Rich
    PowerBook G4 15 1.67GHz   Mac OS X (10.4.6)  

    Hello Rich, Phil and Dave,
    I'll see if I can offer some advice to you all...
    Rich,
    Okay, first of all I want to check what you see in the Printer Browser > Default Browser. Under the heading Printer Name should be Canon MP500 and under the heading Connection should be Bonjour. If you select the printer, the Name, Location and Print Using should be automatically populated (Print Using should show Canon IJ Printer). Do you get this?
    If you do and can add the printer, then what happens when you attempt to print something?
    Phil,
    The -9672 is usually caused by the printer reporting it is a different model to the selected driver. Picking a different printer from the list of Canon's doesn't always work, as there is often control information in the driver comms that are specific for a model (otherwise you could have one driver for every printer). You should try running the Repair Permissions option in Disk Utility. Updates sometimes set some values back to system defaults, which can impact the ability of Mac to correctly identify a peripheral such as a printer.
    Dave the drummer,
    Do you notice the Airport signal strength when the printing fails? I have seen some printing fail like you describe when the signal drops too low. Is your wife's iBook located closer to the Airport than your PBG4?
    Also, I would try running the Repair Permissions option in Disk Utility.
    Regards,
    Paul

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Canon Pixma MP280 AIO printer - ink levels cannot be displayed - how to resolve this problem?

    Good morning everyone,
         I have a Canon Pixma MP280 AIO printer (about 18 months old) now which I previously had installed on a old Windows 7 Pro x64, SP1 Dell Optiplex 755 computer.  That computer finally bit the dust.
    My present computer is a Dell Optiplex 745, Win 7 SP1 x64 Home Premium  machine.
    Description of problem:  After installing the printer on this computer (using the CD/DVD that originally came with it and following all the instructions), I find the printer will no longer display the ink levels.  Every time I click on "Printer Status", the pop-up box just states the info cannot be displayed.  (All other  functions of the printer work just fine).
    Resolutions attempted thus far w/out success:
    1.  Uninstalled printer and deleted all files associated with it (2 times).  Re-started computer, then re-installed it.
    2.  Emailed Canon Support.  their response did not resolve the issue.  (Don't recall just what they said as I've long since deleted that email reply).
    3.  Searched the Forums here for an identical problem with the same model printer, but didn't see anything.
    My question:  Is there a resolution for this problem?
    Thank you for your time and any help.
    Pete C.

    Yes, thanks for  your follow-up .. .Mine did not work after the day-long shut off.
    I am gonna risk buying a new black ink cartridge since my machine seems to just be running the error on the black alone.
    Good luck with your new one.
    I will probably upgrade too, if this does not work.  I cannot complain about this machine. I had two, one for office and one for home. Both took A LOT of use. And, i used no-name refill cartridges and no-name refill ink for over half the time on the home machine.
    This one, the home one lasted about 6 years, the other about 4+1/2 . I think that is pretty **bleep** (lol it censored the correct spelling of 'dam') good mileage for a fairly inexpensive machine, that got very high ratings, and gave me all those features.
    Good Luck.

  • MacBook Air Canon Pixma ip 5000 printer driver

    I have a MacBook Air and I cannot find a printer driver for the Canon Pixma ip 5000 printer driver.  Please...Please help me.

    Get it from Canon or see if it is listed here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Should my Canon pixma MG6320 be connected to my computer doing a "download" of a new driver?

    Should my Canon pixma MG6320 be connected to my computer doing a "download" of a new driver?
    Solved!
    Go to Solution.

    Hi set231,
    When installing a new driver, it is recommended that the PIXMA MG6320 is not connected to the computer.  Please connect it when prompted during the installation process.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

    I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

    Thanks, PAHU, for providing the Australian site for the Canon driver.  I have an MP500 and it still seemed to print fine after I downloaded Yosemite.  However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
    In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1.  Just tried printing this evening and it wouldn't.  Advised I needed undefined "software." Got various error messages.  Went to Google and read this and downloaded that to no avail.  Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter."  Had no clue what that meant!  System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions).  Finally I downloaded from the Australian site, just the print driver 10.51.2.  The printer then printed!!!  (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.)  I'm holding my breath that things will continue to work.
    Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

  • My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer

    Greetings:
    I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer.  I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord.  I'm not finding any option to install it as a usb printer.  Please help asap.  I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had this problem w/Dell.  (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation.  that option is absent in my attempts).
    Thank you!
    This question was solved.
    View Solution.

    Firelily, welcome to the forum.
    Here is the download page for the driver and the software for the printer.  If you install it, you should be able to print.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

    Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
    Have new Canon Pixma Pro-100 printer and set it up yesterday.  First thing printed was a
    document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK.  Next I fire up
    Photoshop and open a 4 X 6 inch image to do a test print.  I set it up in the print dialog as
    4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
    manages the color.  I load the paper in the rear tray close the covers and hit print.  Now, when
    it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
    on the remaining 2.2 inches then spits the paper out.  It does this in Photoshop (any image it doesn't
    matter), and it does it printing from Capture NX.  I have been able to get it to print on the paper
    correctly using Apple's Preview program but that that's not going to do me any good.  I was on
    the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
    I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
    I want to be able to print from Photoshop.  Any one every heard of this or experienced the same
    problem? Thanks JamesD!

    Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
    My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
    When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
    Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
    It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
    On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
    Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
    One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
    I also checked out this B&W test image:
    http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
    You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
    You can print a series of test images:
    find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
    You can do a similar thing in Lightroom using the printer driver and User Templates.
    There would be some one-time trial and error to that approach.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

    Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • Canon Pixma MX 450 printer showing offline with OS X 10.7.5

    Any input would be greatly appreciated. I joke with Canon's IT department that I keep them employed! I was calling them at least twice a week for a few weeks to try to fix the problem, but was unable to find a resolution. I returned a less expensive Canon printer today, in a desperate attempt to get my wireless connection to work! I just installed a Canon Pixma MX450 wireless print, copy, scan, fax with my OS X 10.7.5. Everything seemed to be going great. The setup was fine when communicating between the router and printer; none of those connections failed. However, once I installed the software from Canon and tried to setup the wireless connection from the computer to the printer, the printer could not be detected wirelessly-I had to pull out the 'ol USB. With the USB, the printer was detected. The test print page printed, which game me a false hope! I tried a dummy page from Pages and Word both, but nothing prints. The printer error indicates the printer is offline and not connected. This is the same problem I had with the less expensive Canon. Help! I want to be able to use the wireless function that I paid for to print. Thanks

    When you connected the MX450 to the Mac via USB cable, it would have created a printer in Print & Scan for this USB connected printer. If you then disconnect the MX450 USB cable from the Mac but then attempt to print to the MX450 using the printer that was created for the USB connection, this will result in the "Printer Offline" message.
    So, are you trying to print with the MX450 printer that was created for the USB connection?
    If you are not using the USB printer and definitely using the printer that you created when the MX450 was connected to your wireless access point (wireless router), then try removing this printer from Print & Scan and creating the printer again.
    If you cannot find the printer when you try to add it again then check the wireless network settings via the control panel on the front of the printer. It will confirm what wireless network it is connected to and what IP address it has acquired.

  • My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".

    My Dell Inspiron 1525 laptop is USB connected to my Canon Pixma MX392 multifunction printer. Though the
    printer is functioning properly in all respects, a message is showing that my laptop "cannot detect" the printer.
    At the same time I'm receiving a message (wizard?) "Found New Hardware - Windows Needs to Install Driver
    Software for Your Universal Serial Bus (USB) Controller". My Printer folder shows my Canon is "ready",
    and the Port is shown as "USB..Virtual printer port for Canon MX390 series Printer". My Device Manager
    folder lists the Canon printer and fax under "Printers", and under "Universal Serial Bus (USB) Controllers"
    are listed: MX390 series (1 time); Universal Serial Bus (USB) Controller (7 times); Unknown device (7 times);
    USB Printing Support (2 times). I've tried unistalling and re- installing everything associated with the printer,
    but get the same results. As I've stated the printer is functioning fine, but the "incessant" appearing of the
    message, "Found New Hardware, etc." is extremely annoying. When I follow the "wizard's" instructions to,
    "locate and install driver software (recommended)", I'm finally told to" insert the disc that came with your Universal Serial Bus (USB) Controller". I don't have any discs that came with either the printer or laptop. Is
    anyone able to make any sense of this...and, hopefully, offer help in getting rid of the "Found New Hardware"
    message. Many thanks!

    I'm not sure the error is related to your printer.
    http://www.tomshardware.com/s/install+driver+universal+serial+bus+usb+controller/
    Have you tried going to the Windows Update software program and seeing if there are any udates related to your message?
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • I need to connect my Chromebook to my Canon PIXMA MG3520 wireless printer

    I'm having problems connecting my Chromebook to my Canon PIXMA MG3520 wireless printer. Because of the Chrome OS, it will not connect like Windows or Mac. I need help before retire, please.

    Hello Bama-85,
    You are correct, printers do not install the same way on Chrome OS. I looked on the Google Cloud Print site and your Canon printer is indeed supported. Follow this link to setup your cloud ready printer.
    I haven't setup a Canon printer via Google Cloud Print, but I assume it's as easy as setting up HP's printers on the print service. 
    Miles
    HP Employee

  • HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX  processor.

    I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC  OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help  thank you   Allan R

    So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
    I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 -  Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
    So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

Maybe you are looking for