Canon Pixma MP-540 (and other) does not work with Cups 1.4

Since Cups 1.4 my printer does not work
its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
and lsusb output:
Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
. Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

Similar Messages

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • I often rely on my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall recent Mozilla updates until this add-on works with Mozilla, or am I stuck? Thanks!

    It's probably really easy to figure this out and uninstall the updates but, well, I'm slightly tech-illiterate! I use my Norton Toolbar a lot for those sites I visit infrequently, and this non-compatibility issue is the same reason I stick with Mozilla over Chrome, but now I can't even use my Norton information with Mozilla. Thanks.

    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

  • OFFICE 2013 HOME AND BUSINESS does not work With Blackberry Destop Software 7.1

    Hi,
    I have read somewhere that I should use BlackBerry Desktop Software 7.0, but where can I found it to download it and install it?
    Or when does RIM plan to release a new version of its BlackBerry Desktop Softwware that comply with Office 2013?
    Best regards

    This is maddening -  I simply cannot synch my calendar with Office 2013. When should I expect an update for Desktop Manager that works with Office 2013?

  • I bought a digital av adapter and it does not work with ipad2, what do i do?

    Bought a digital av adapter and it is not supported by ipad2. What do i do?

    Mine works fine with both my iPad and my iPod Touch.  Been using it for two years.  I recently replaced it with an Apple TV.

  • I downloaded the 3.6.15 firefox, however when it comes up it is 3.6.14 coming up and it does not work with some of pogo games what is wrong

    word womp will not play because it says firefox has a bug in 3.6.14

    Your More system details list shows a Firefox 3.6.14 user agent, so it looks that the update didn't succeed. You can try to update another time.
    See also:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

  • Drag and drop does not work with multiple images

    if i try to drag and drop more than one image, nothing happens, no activity at all. i think i had this problem on another computer and it had something to do with the fonts. i can not remember exactly thanks iphoto 6

    Go to font book and use it to make sure the helvetica font is enabled - disable and re-enable it if necessary.
    Regards
    TD

  • I downloaded firefox 4.0.1 and it does not work with Norton. How do I load 4.0 back on?

    With firefox 4.0.1 none of my passwords or log in names are entered from my norton program. I would like to go back to 4.0 which was working fine with all my systems. Any way this can be done? Below it list my installed plug ins but those are from my laptop which I'm using now not from my desktop which is the problem child.
    L

    Symantec are due to release updates very soon to make their add-ons work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808
    Pending this update, you can go back to Firefox 4.0, their add-ons work in that version. You can get Firefox 4.0 from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/4.0/win32/ - you need to select the folder for your language, you can then download and run the Firefox 4 setup file to install it.
    If you do install Firefox 4.0 temporarily turn off automatic updates until Symantec update their add-ons. To do that in the Firefox options window, go to the Advanced panel, and then the Update tab and de-select the option to automatically check for updates to Firefox.

  • I want to go back to 3.6 because 4 is dangerous and 5 does not work with essential addons and websites. How do I find previous versions to install?

    The new major update cycle is way too fast. I want to get off. Please tell me how to uninstall 4.0.1 and reinstall 3.6.4 (MacOS-X). Reading up on the critical vulnerabilities for 4.0 convinced me that I don't need this headache. I've only installed 4.0 on one of my three computers (home). Wait! I see that 3.6.dmg is still in my downloads! Now, I just need to figure out how to uninstall 4.0!

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • IPhoto change time and date does not work with Flickr

    Hello everyone,
    In my iPhoto librairies, I do change my photo date and time to set them we they were actually taken. Here, I'm refering especially to photos which are:
    * scanned photo
    * stiched photo
    The issue is:
    When I share these photo on Flickr, Flickr sort them with the previous date time setting, even if I have selected to change the original file in iPhoto.
    So it is painful to end up seeing that all the work done on iPhoto is not reflected elsewhere.
    This issue can only be in iPhoto as the old date time should be swapped with the new one.
    Let me know when the fixed will be implemented so I stop loosing precious time editing photos!
    Regards,
    Francois

    I have an Access Database created with Access 2010 installed on a machine running Windows 8 using the Access 2010 Runtime code. For the most part the database works but all reports that require a date in the header come out with ##error. Works fine
    with full access on any other machine. Just this one were we are using Runtime. Any ideas?
    Make sure you don't have Date used as a Field Name, as it is a Reserved Word in Access and can cause unpredictable behavior.
    Also make sure you have compiled the VBA code, before using the Runtime version.
    Have error handling in place, to capture errors in your DB.
    Hope these pointers help,
    Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
    Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered.

  • Strange- A 1" horizontal strip on the screen (which includes the tabs + 0.5cm above and below) does not work with the mouse pointer, only with firefox

    The mouse wont click anywhere over a 1" strip that includes the area where the tabs are lined, and extends 0.5cm above and below this. So, to open or close a tab I can only use Ctrl T or Ctrl W respectively. And, for ex, I cannot click on the top most line on Facebook (which has the Home, messages, news feeds options etc) or that of Twitter, and so on. I have used Mozilla Firefox all my life and this has never happened before. I don't have this problem with any other browser like Internet explorer or Google Chrome. I find it very strange.

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

    Hi,
    I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
    Status:Failure-test failed:unsupported verified type
    Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
    Thanks for help
    Sivaji

    It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

  • VMware Fusion 2 does not work with lion

    I need the VMware Fusion to run my dictonary on the Mac. I have up to now Fusion2 and this does not work with the lion.

    jbjoret wrote:
    VMWare and Parallels hook themselves deep with the OS and are not standard applications.
    Parallels broke in the 10.6.8 update, caused a lot of headaches around here.
    I don't think they follow Apple's rules too well.
    Fusion might be a bit less feature rich, but it seems they are more complaint. Also Apple sells Fusion and likely uses it themselves.
    Both are excellent of course.

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

    My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

    you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you

Maybe you are looking for