Canon Pixma MP495 not working with mini

I'm trying to use the scanner on my Canon Pixma MP495 with my Mac Mini. The printer works okay, but when I click on the scanner, I get an error that says reopeon or okay - MP Navigator EX quit unexpectedly.

I would like to add I might have the problem solved.
I found an older Windows forum from 2009 where another person had a similar problem and it was suggested to use the add 'local printer'. Of course, the wizard set it up so not sure what it did but I did what they suggested and the scanner finally works.
Also, when I went to print something, the preview picture came up and the door to the printer popped open but one of my ink cartridges is out so it couldn't print.....bummer.
At least I never got the 'driver not installed correctly' message.
As soon as I get a chance to get some more ink and try it, I'll post the results.
**fingers crossed it works**
Thanks~
squirt11

Similar Messages

Canon pixma mp600R not working after security update

Hi,
yesterday apple software update installed the last updates for my intel imac with 10.4.11. After that my canon printer is not working via airport. USB works fine. the networking utility sends and receive pings to the printer.
Tried to reinstall with the canon network tool. after checking of the airport signal (good) the printer utility open but I cannot add my printer, because its not shown.
does have anyone a idea to get the printer working wireless again?
P.S. My ibook prints pretty fine wireless to the canon. So its not a airport problem.

Hi Martin, try this...
Safe Boot off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Reinstall the Driver if need be.
Fix Permission before & after any SW update.

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

Canon PIXMA MP600R - not working in wireless mode since installing 10.6.1

I have a Canon PIXMA MP600R which was set up to use over a wireless network and was working completely 100%.
However I installed Snow Leopard two weeks ago and now the printer wont work wirelessly. I have reinstalled the printer three times now, downloaded the printer updates from Apple and still no joy. I have trawled through the help file and the Canon PIXMA MP600R manual and have still not managed to connect wirelessly even though all the criteria's are met - access point, network configuration etc. The printer does not display in the Utility Printer Network List only in the USB list. When trying to connect to the printer to the router the message 'Printer cannot be found' pop up comes up even though all MAC, IP address, network access are met... any ideas?

Not sure why this is giving you so much trouble but I believe the MP600R will work fine on Snow Leopard once we get the machine correctly configured. I think I made an assumption that you were printing fine via wireless with another version of Mac OS X. But given that the printer does not appear to have/had an IP address set, then it would suggest that you were not printing previously via wireless. Is this correct?
To configure the IP address in the MP600R you have to connect the printer to the Mac via USB. Then you select the USB attached MP600R in the Printers list and open the Options & Supplies > Printer Utility. This will open the Canon IJ Printer Utility. Here you select the MP600R and now the Network Settings button should appear. If the button is still not present then you may have to download and install the Canon IJ Network Utility v2.70. In testing 10.6, my printers have already been configured for the network so I have never needed to do this setup step and therefore I am not certain if the facility exists to configure the network settings without this tool being installed. Apologies if this has been the stumbling block.
Once you have the Network Settings button present, select it and go through the procedures to configure the network settings. Once this process has completed, the setup will prompt you to turn off the MP600R and then disconnect the USB cable. Then when you power the MP600R back on, the machine should be connected to your wireless access point. At this stage you can check that the MP600R has an IP address via the Device Settings menu on the printer (refer back to my third reply to check how this is done).
Once the printer has an IP address and shows that it is active, you can now add another printer queue, this time for the wireless connected MP600R. Open Print & Fax, select to Add and choose the Default view. As I said in the first reply, you will probably see the MP600R immediately as a Bonjour Scanner, but we need to wait until the MP600R appears with its Kind column showing 'canonijnetwork'. When this does appear, select it and the Print Using menu will automatically find the correct driver. Click Add to finish adding the network printer queue.
Hope this stops the hair reduction....
Pahu

Samsung P400 Projector not working with mini-DVI to VGA

I've never had so many hardware problems with a computer before... sigh.
Why they labeled a 100-240v 50/60Hz power supply with a sticker that says 100-120V 60Hz is beyond me (Sony did the same with their original US PS3s but that's another tale). Anyways, here's my issue.
I just bought the new 2009 Mac Mini along with a Samsung P400 Projector. This is one of those new pocket type with the LED bulbs.
The Samsung P400 has a native resolution of 800x600 60Hz and can accept analog composite or VGA video signals.
So, in my blind belief that Apple would sell me the correct adapter to go from mini-DVI to VGA, I went and I purchased said adapter. And lo and behold, it doesn't work.
Now, I'm a computer guy, I've built my own systems. I know the difference between analog and digital, DVI-I and DVI-D, etc. So, when I read the specs on my merchandise and they all use the same connection labels DVI, mini-DVI, VGA, etc. it really irks me to find that they are all incompatible with each other. I don't understand how this is supposed to help the customer. It's ridiculous. Apple is supposed to be user friendly but this is downright evil.
But, I've invested over a thousand dollars in this venture and I want it to work. *SO, before I go and run out and spend another $30 on a mini-DisplayPort to VGA adapter, can anyone tell me if it will work with my projector????*

Thanks for your help.
But I had just figured out a solution today. I guessed that the resolution wasn't holding when I switched monitors so I went and picked up a mini-DisplayPort adapter to run the monitor along side the projector at the same. This way I could see what was going on.
Turns out that projector was automatically being set to 1600x1200. I changed the resolution to a lower one and it was fixed. Of course, when I tried to switch back to the mini-DVI to VGA adapter, OS X forgot the settings again and I had to redo everything.
I'll try your solution as well but for now, I think I am okay. I will just use the mini-DisplayPort to VGA and not unplug the projector unless I really have to.
I'll test your solution just in case I need to reset the resolution again.
Thanks once again!!!
Message was edited by: BakaBaka

Canon MP620 does not work with OS 10.10.2

Is their anyway to get a Canon MP620 to work with OS 10.10.2

The last printer driver that Canon released for the MP620 was for OS X 10.9. Here is a link to that driver. You should be able to install this driver on 10.10. If you get a message stating that it cannot be installed due to its digital signature then right-click on the installer and select Open from the pop-up menu that appears. Now you will get the option to install the driver.
With the driver installed you can then add the printer. If you are having trouble with adding the printer then please reply.

HDMI does not work with Mini iPad

I bought the new HDMI x lighting adapter so I could play video downloaded to my Mini Ipad on my TV. It does not switch over automatically to the TV although my new iPad Air does work fine with same adapter. I have looked for a setting on the Mini that I may have missed but all is same as on iPad Air. Does anyone have any suggestions? I have found similar questions on community but no firm answer as to the possible solution.

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

Canon MG5250 Scanner not working with OSX 10.7.2 HELP PLEASE

I have tried to get my canon mg5252 multifunction to scan, im using OSX Lion 10.7.2, I have tried downloading the canon drivers (mp 4.0.3 and ica driver 1.9.0) but still cant get it to work !
Any help is greatly appreciated !
Thanks
sc

Uninstall the device using Canon's instructions. Then assuming you are using a USB connection to connect it to your computer restart the computer in Safe Mode to clear some caches. Then restart the computer normally. Then connect the printer to the computer via USB and turn on the printer. The printer should then be seen in the Print & Scan preferences. If not run Software Update. To scan use Image Capture (it's preloaded on your computer) and scan using the Image Capture tool.
If you still have trouble then follow the instructions in Printing Overview OS X Lion.

CR2 RAW files from Canon 7DMarkII do not work with Lighroom 5.6

Although I upgraded to latest available veriosn Lighroom 5.6 can't import CR2 files form Cnaono 7D Mark II.
Any ideas?

Is the 7D Mk II in the "supported cameras" list?
Camera Raw plug-in | Supported cameras
It's a brand new body - Lightroom has no idea what to do with its files.
When will Lr 5 support the new Canon 7D Mark II?

Canon Pixma MP-540 (and other) does not work with Cups 1.4

Since Cups 1.4 my printer does not work
its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
and lsusb output:
Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
. Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Canon Selphys not working with Gutenprint

Is there anybody who can confirm that a Canon Selphy (any model) printer (sublimation) is really working with Guteprint drivers (comes with Snow Leopard)? Because there is reports everywhere that they are not working:
http://discussions.apple.com/thread.jspa?messageID=10078893&#10078893
http://discussions.apple.com/thread.jspa?messageID=10028860&#10028860
http://discussions.apple.com/thread.jspa?messageID=10167685&#10167685
http://discussions.apple.com/thread.jspa?messageID=10163518&#10163518
Mine is not working with Gutenprint either. I have Canon Selphy CP-740. I downloaded even the newest gutenprint drivers (5.2.4) but no.
http://gimp-print.sourceforge.net/MacOSX.php
I have the exact same symptoms as in the first three post in the first thread above: The driver reports that it's 100% ready, but nothing happens. With the updated 5.2.4 it takes the paper inside the printer and then stops there!
Of course I got it working with the original (old) Canon drivers from Canon's homepage, like some other people on those threads. But the Canon driver is not nearly as good, because there is so darn few adjustments. Gutenprint would have been much better.
So - Is there any Sephys out there actually working with Snow Leopard's Gutenprint drivers?

Hi ANinnovation!
Thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!

My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

Macbook mini-DVI - DVI - HDMI not working with My 32" Vizio

Okay so my Macbook mini-DVI - DVI - HDMI is not working with My 32" Vizio. I've connected an 18 pin plus one slot DVI to HDMI cable to my 32" Vizio HDTV, this cable is connected to my macbook via a Mini-DVI to DVI cable, this one has 24 pins plus one slot on the DVI side. My Vizio display is blue, no signal, it reads. I'm wondering if the reason it's not picking up the display is the lack of pins on the DVI to HDMI or because I dont have any display options aside from screen size and color on my display menu. BTW I hit the detect display button and nothing happened.... I know I just wrote alot here but hopefully someone will read it and come to the rescue. thanks

Oops, I guess all I had to do was restart my macbook. I feel like an idiot.....all is well.

Canon Pixma MP495 not working with mini

Similar Messages

Maybe you are looking for