Canon Pixma MP520 does not work with Airport under Leopard

Before this printer MP520 worked without any problem.
After installing Leopard, I can print through USB but not through Airport.
I installed all latest updates for Leopard, firmware for Airport and even the latest Canon driver.
I can see the printer in my Bonjour list. Then it looks like it's connecting and then an error window pops up. Error A 306, print attempt failing.
I also restarted Airport with and without printer connected.
Any hint is welcome

Resolved after complete re-installation of MAc OS X

Similar Messages

Canon pixma IP4000R will not work with Snow Leopard

After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon. There are multiple problems ... the first thing I noticed is that not all of the printer options are available on the print dialog. When I tried to print, I got "fatal::internal error -9660."
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Anyone have any ideas? Other than buying a new printer ...
nojp.co.canon.bj.print.PrintSettings.BJThrougoutPage..b. media=na-letter PaperInfoIsSuggested..b. pserrorhandler-requested=standard sides=one-sided job-uuid=urn:uuid:f3c1ff27-c401-385e-4a60-d6659c8dcfff job-originating-host-name=localhost time-at-creation=1289542148 time-at-processing=1289542149 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 Duplex=None PageSize=na-letter"
D [12/Nov/2010:00:09:10 -0600] [Job 5] argv[6]="/private/var/spool/cups/d00005-001"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[0]="<CFProcessPath>"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[11]="[email protected]"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[12]="SOFTWARE=CUPS/1.4.5"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[14]="USER=root"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[17]="IPP_PORT=631"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[18]="CHARSET=utf-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[19]="LANG=en_US.UTF-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[20]="APPLE_LANGUAGE=en-US"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[21]="PPD=/private/etc/cups/ppd/iP4000R_00_00_85_4f_d4_8e.ppd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[22]="RIPMAXCACHE=8m"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[23]="CONTENT_TYPE=application/pdf"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[24]="DEVICE_URI=file:///dev/null"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[25]="PRINTER_INFO=iP4000R (00.00.85.4f.d4.8e)"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[26]="PRINTER_LOCATION="
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[27]="PRINTER=iP4000R_00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[28]="CUPS_FILETYPE=document"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[29]="FINALCONTENT_TYPE=printer/iP4000R__00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 4367)
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] PrintJobMgr trying ppc architecture...
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] fatal::internal error -9660
D [12/Nov/2010:00:09:10 -0600] [Job 5] End of messages
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state=3(idle)
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-reasons=none

Liz Gensheimer wrote:
After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon.
The driver version provided by Canon is v10.26.x while the update provided by Apple will increase the version to 10.30.3.0. The v10.26 and v10.30 drivers provide all the features that the previous v4.8.3 driver for OS X 10.5 and earlier provided. However the layout for these menus is definitely different.
Also, a lot of user who upgrade from a previous OS X may not realise that the default print dialog is in a minimised view. You need to press the disclosure triangle next to the printer name to get the expanded view.
When I tried to print, I got "fatal::internal error -9660."
I suggest you try a printer reset.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your iP4000R print queue but not the printer drivers. So you will only need to add the queue again.
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Yes they are both CUPS by name as they are both made by Canon. But this is not your issue. If you believe that a particular option is not available then please reply with what that is.

Canon MP830 scanner does not work with Leopard

Hi,
I have a Canon MP830. The printer function works fine but the scanner function does not work anymore since I've installed Leopard. From time to time it seems to work, randomly, ... but most of the time, if I use the MP830 navigator software and try to scan in a batch (from the tray), I get an error message saying "Het scannen is mislukt" (dutch for: Scanning process failed).
I hope that Apple and/or Canon are working on updated drivers because this is quite annoying... Plenty of fancy features in Leopard, but the easy, all-day features don't work
This is maybe not the right place to mention this comment but:
After I've installed iCal, it crashes everytime (randomly) when i click on the details of a calendar item... and generates an error message report... I can imagine I am not the only one who has this problem. Never had this before when using Tiger.
Regards,
F.

Actually, Canon has been providing various updates throughout the month of November. Go to www.canonusa.com, place your cursor over "downloads" and when a drop down menu is presented, click on "consumer." You might have to be patient, the site has been slow lately. Anyway, click on the pull downs in the middle of the page to select your printer. When the next page is presented, select MAC OS X from the pull down menu and you'll see the drivers and updated applications.
Over the weekend, I purchased an MP610. After performing the installation of files from the CD, I then downloaded and installed drivers and applications and the printer seems to work just fine, to include scanning, copying, etc.
Hope this helps,
Jimmy

Airport card does not work with Airport Extreme when security is turned on

I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
It works fine if the wireless security on the Extreme Base station is turned off.
Please help and thanks in advance.
Motasim

First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

D-Link DIR-615 (Rev H1(!)) does not work with Airport Express?

Hi there,
I had my AirPlay working just fine with my Airport Express (AX) and my wireless N Router D-Link DIR-615 (Rev. B2). Now I changed my Internet provider and received a D-Link DIR-615 (Rev. H1) and I cannot find my AX anymore (I mean, it's still here, but the AirPort Utility cant find it!)
Are there known issues between those two?
(The Rev. H1/B2 is the Hardware Version of my D-Link DIR-615. The Firmware is up-to-date (8.01 I think))
The status light is a solid, beautiful green.
I already tried the following:
- restart the AX, the D-Link and my MacBook (10.7.2)
- changed from AES to TKIP (found that somewhere in the internet)
- Reseted my AX to factory settings and configured everything new. (via Ethernet)
Probably interesting:
- After resetting to factory settings and configuring everything new, the AX showed up in iTunes, but when I tried to connect with it, it kept me waiting for 1-3 Minutes and simply did not connect w/o error message. The AX disappeared after restarting iTunes.
I'm running out of solutions..
Anyone a good question/suggestion or answer for me?
greetings
squob

Only way I see out other than waiting, is to hook he Drive to a Mac, (FW preferable for speed), then get Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
Which can be set to trigger Backups when Shares mount.

Canon pixma mp500 scanner not working with mac osx 10.6.8

I'm having difficulty using my scanner. I've updated the Canon driver with the most recent version. It recoginises the printer/scanner but won't import image. Has anyone had a similar issue and successfully resolved it?

duncan, I've got an MX 880 series all in one printer, and have the same issue. A work around that I use is to select "e-mail" the scanned item. The scanned item is then inserted into an e-mail format where I can choose to download/save the scanned document into whatever folder I want. This was the only expedient method I could find. The Canon software capability between some of their newer printers and Mac operating systems is not totally compatible. For example, sometimes the top half of a line of text gets printed on one page, and the bottom half of the line gets printed on the ensuing page. Doesn't happen often, but it is annoying.
Wuz

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

I had the same problem. I make my AF work going to Menu / AF mode and selected Live mode. On Quick mode the AF did not work. I change the settings without realise it. Now my AF is working fine.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

My cannon printer worked with snow leopard but does not work with Lion

My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

Have you downloaded and installed the latest Canon printer drivers?
http://support.apple.com/kb/DL899

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

Does AirPlay work with AirPort Extreme?

Does AirPlay work with AirPort Extreme?

The AirPort Extreme does allow AirPlay to "pass-through" but it does NOT support receiving AirPlay streams to be played back through powered speakers or an audio receiver as it does not have any built-in audio circuitry like the AirPort Express models.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Canon Pixma MP520 does not work with Airport under Leopard

Similar Messages

Maybe you are looking for