Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with 8 GB 1600 MHz DDR3
I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
Can anyone help as I have to get a document out tonight
Many thanks in advance
S

Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

Similar Messages

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

Okay, regarding this problem:
I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
Please follow below steps:
In Spotlight search window type Terminal and then press Enter.
This should bring up the terminal window/program.
In the Terminal type:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
It will ask for your password. Please enter system password.(You will not see password entering)
After that type following:
sudo launchctl stop org.cups.cupsd then press Enter.
Try Printing.
I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
Hope this helps people out!

My Canon Pixma Pro9000 Mark 2 printer and red cast to prints

My Canon Pro9000 Mark 2 prints with a severe red cast on all prints. It has worked great for 3 years prior on my Mac. Just updated and installed Mavericks (OS 10) and believe that to be the culprit. Already checked ink tanks, ran printer head tests, cleaned and deep cleaned, and so forth. Does any Mac user (or other) know of a fix for this?

It may be a little different with the 9000 as it is several models back by now. But what I explained should be close.
Don't have it? Get it HERE <--- click me
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

PDF printing is broken with "Stopped Filter failed"

This is really a "windows" kind of error, that i was not expecting to see in Mac,
I have Timecapsul wireless network, printer 7520 (HP) I bought it from Apple store,and macbook pro.
everything works I have printer setup wirelessly etc .. but for some reason I can not print from PDFs only
again it only happens with PDF files, all other doc formats print fine.
I have full licensed version of acrobat XI Pro.
I tried reinstalling driver, removing adding printer etc ... nothing helps,
my computer name in sharing is not empty, ... what else to try?
now I am deciding should I contact HP Adobe, or Apple for tech support,
this is so confusing ...

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

After installing Firefox 4.0 when trying to print get "Prop Res Dll not loaded" error message. I have a Dell A960 printer.

Installed Firefox 4.o now when I try to print and click on "properties" I get error message "Prop Res DLL not loaded". I have a Dell Printer A960. Never had this problem before so how do I fix this? I don't know that much about computers so please make it simple as I'm not that literate when it comes to complex computer fixes. thanks

See this [http://www.google.com/search?q=Prop+Res+Dll+not+loaded&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Google search] for a "fix".
Here's a Firefox bug that was filed a few months ago. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=649128 <br />
Looks like a problem caused by Lexmark print drivers doing a strange installation (Lexmark makes some of the Dell branded printers). Mozilla isn't going to revert the way Firefox looks for print drivers due to security concerns.
See if you can follow the fix posted here: <br />
https://support.mozilla.com/es/questions/816333

Airport Extreme and Canon Pixma MP610

I recently got a MacBook Pro. I wanted to print wirelessly so I also purchased a new Airport Extreme and Canon Pixma MP610 printer all from the Apple Store. I told the salesperson what I wanted to do and he did not indicate there would be a problem, he said make sure I had the most current printer drivers, which I have done. I tried everything but I am unable to print wirelessly using the USB connection between the Airport and the printer. Can anyone help me? Is this printer compatible with the Airport? This is very frustrating and expensive. I could have just kept my old base station and printer.

I am having the same problem with my MP610... I have connected the printer to the usb port on the AirPort Express and have tried installing various drivers to try and fix the issue but have had no success so far.
My Airport Express is setup correctly (green light) and is found in AirPort Utility... additionally, when I go to System Preferences -> Print & Fax, the printer is there and found wirelessly... yet whenever I try to print I receive a "error number : 306..." in my print queue... also, depending on which driver I use, I receive a "Unable to send 1 bytes of print data! (USB write error)" error message on top of the "error number : 306"... sometimes I also manage to avoid any error messages where the status shows it is 'Printing' but there is nothing being printed...
Now, obviously this is a wireless issue, as the printer works when connected via usb directly to my MacBook Pro...
I contacted Canon Support, and was told that I would not be able to print via any AirPort connection as the printer itself is a "Host Based Printer" and was not designed to support networking and that my only other alternative/option to wireless printing would be to purchase a "USB printer server" that supports IP Address forwarding... (on a side note: does the AirPort Express not support this?)
The whole reason why I purchased AirPort Express was so I could print wirelessly from a regular printer by connecting it to its usb port... and looking at the Airport support page on Apple's website, it clearly doesn't mention anywhere that the printer needs to be network capable or that there would be any compatibility issues with regular printers... After-all, it revolves around the idea that all you need to do is connect the printer to the AirPort via USB and that it will take care of the rest when setup correctly...
So ultimately my question is, has anyone had any success in setting up a wireless connection with their 'Host Based Printer'/ordinary usb printer...? if so, how?!! please describe in detail :P lol
Also is that doesn't work, is there any way I can use the AirPort Express to wirelessly print using an IP Address without having to buy a 'USB print server'?
Sorry about the very long description... any help would be really appreciated!

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

Canon Pixma MP610 - Not recognised

Just bought a Canon Pixma MP610 multifunction printer but despite loading the driver that came with it, my Macbook does not recognize it.
I downloaded the latest drivers from the Canon website - but still no joy. When I go into printers and faxes it does not even appear. Any suggestions ?

When you add a Canon inkjet printer queue there is no ability to browse for the printer driver via the Print Using menu. The driver software needs to see the printer on the end of the USB cable to work.
The usual procedure to add the printer is to run the driver software installer first without the printer being connected. Then once the installer has finished and you have restarted the Mac, you can connect the USB cable. When you do this the software often finds the Canon printer and automatically adds it to the printer list. If it doesn't automatically add straight away, you can try to add it via Print & Fax > Add. When you do this I have often found that the printer, after selecting the printer via the Default view, has already been added.
Before attempting to print, you should be adding the printer via Print & Fax. After selecting Add ( + ) the printer should appear in the Default view as a USB device. If after selecting the printer name, the Print Using menu does not automatically change to Canon IJ Printer, then something is wrong with the driver software and generally needs to be reinstalled. Following is my procedure to reinstall the Canon driver software.
1. Open System Preferences > Print & Fax. Highlight the Canon printer in the Printer list and click the minus ( - ) button. [Since your printer is not installed then you don't have to do this step]
2. Hold Control key and click in the empty Printers list. Click on Reset Printing System.
3. Close Print & Fax
4. Go to Library > Printers > Canon and delete the contents of the BJPrinter folder.
5. Go to Library > Receipts and delete the Canon driver package file, if one exists. The file name will show Canon MP610 693.pkg. If you are not using the MP210 on this machine, you can delete its package file if it is here also.
6. Go to Library > Preferences and delete the Canon folder.
7. Go to HD > Users > Shared > Canon and delete the BJPrinter folder.
8. Empty the Trash
9. Unplug the Canon USB cable and restart the Mac
10. Install the latest version of the Canon driver. Check the Canon web site to ensure you have the latest version.
11. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
12. Reconnect the Canon USB cable. Then open Print & Fax and see if the Canon printer is listed. If it is, try a test print.
13. If the printer is not listed, click the plus ( + ) button.
14. Select the Default view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
15. Click Add to add the printer.
PaHu

I want to use my canon pixma ip4500 as my printer with my good ole G4. I need a driver. Is there an easy way to get that or is my G4 too old?

I want to use my canon pixma ip4500 as my printer with my powerbook G4. I need a driver but was very confused with how to get one. Is it possible and could someone come down to my level and tell me step by step how to do it? Many thanks.

Nope, your PB is not too old.
Here is the link to the PIXMA ip4500 drivers on Canon's site:
Drivers & Software
The page has you first select your version of the Mac OS (10.4) from the pull-down "Chose Operating System" menu. Once selected, you'll see the available software, Click on the arrown next to "Drivers" and it should look like this:
(click image to enlarge if needed)
Click the word "Download " and you'll get the driver.
Note at the top of that image there are other links to other documents pertaining to this printer. If you click on "Brochures and Manuals," while you are on that web page, you'll have Canon's instructions, probably better done than by anyone here other than someone who has the same printer model on a Mac running OS 10.4.

Canon MF5950dw throwing Stopped - 'filter' failed printer error

We just bought a Canon MF5950dw printer, and on a MBA running 10.8.2 when we try to print anything over the network, it'll stop with the error: Stopped - 'filter' failed.
I've:
repairing permissions from the rescue disk
tried deleting and re-adding the printer
uninstalled and reinstalled the drivers
reset the CUPS printing system
and nothing has helped. The MBA has no problem printing to our old printers. It works fine on the my MBP running 10.8.2 and our Windows 7 machines. It persists whether I set it up as a Bonjour printer or an IP printer.
Anyone know how to fix this? thanks!
Below is the cups error_log:
E [19/Jan/2013:16:29:39 -0500] [Job 6] Job stopped due to filter errors; please consult the error_log file for details.
D [19/Jan/2013:16:29:39 -0500] [Job 6] The following messages were recorded from 16:29:38 to 16:29:39
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding start banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Queued on "Canon_MF5900_Series" by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Auto-typing file...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Request file type is application/vnd.cups-banner.
D [19/Jan/2013:16:29:39 -0500] [Job 6] File of type application/vnd.cups-banner queued by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding end banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] time-at-processing=1358630978
D [19/Jan/2013:16:29:39 -0500] [Job 6] job-sheets=none,none
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[0]="Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[1]="6"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[2]="kelly"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[3]="testprint"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[4]="1"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=16929 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:62e1ae28-d482-3786-78e4-bade79b0939a job-originating-host-name=localhost time-at-creation=1358630978 time-at-processing=1358630978 PageSize=Letter"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[6]="/private/var/spool/cups/d00006-001"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[0]="<CFProcessPath>"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[9]="HOME=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[11]="SERVER_ADMIN=root@localhost"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[12]="SOFTWARE=CUPS/1.6svn"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[14]="USER=root"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[15]="CUPS_MAX_MESSAGE=2047"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[18]="IPP_PORT=631"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[19]="CHARSET=utf-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[20]="LANG=en_US.UTF-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[21]="APPLE_LANGUAGE=en-US"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[22]="PPD=/private/etc/cups/ppd/Canon_MF5900_Series.ppd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[23]="RIP_MAX_CACHE=128m"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[24]="CONTENT_TYPE=application/vnd.cups-banner"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[25]="DEVICE_URI=dnssd://Canon%20MF5900%20Series._pdl-datastream._tcp.local ./?bidi"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[26]="PRINTER_INFO=Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[27]="PRINTER_LOCATION="
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[28]="PRINTER=Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[29]="PRINTER_STATE_REASONS=none"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[30]="CUPS_FILETYPE=document"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[32]="AUTH_I****"
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 1149)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl (PID 1150)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started backend /usr/libexec/cups/backend/dnssd (PID 1151)
D [19/Jan/2013:16:29:39 -0500] [Job 6] capdftopdl start.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series._pdl-datastream._tcp.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series", regtype="_pdl-datastream._tcp", domain="local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking for printer.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolved as "socket://Canon0b182e.local.:9100/"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -connecting-to-device,offline-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] Executing backend "/usr/libexec/cups/backend/socket"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] load_banner(filename="/private/var/spool/cups/d00006-001")
D [19/Jan/2013:16:29:39 -0500] [Job 6] Page = 612x792; 14,14 to 598,778
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking up "Canon0b182e.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] hrDeviceDesc="Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] prtMarkerColorantValue.1.1 = "black"
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-colors=#000000
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-names='"Canon CRG119 Black Toner"'
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-types=toner
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-levels=100
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_supply_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-near-eol-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-almost-over-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -door-open-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-jam-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -input-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] backendWaitLoop(snmp_fd=5, addr=0x7fe17b410178, side_cb=0x10a2e1013)
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1149 (/usr/libexec/cups/filter/cgbannertopdf) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -com.canon.unsupportedsize-error
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1151 (/usr/libexec/cups/backend/dnssd) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1150 (/Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl) stopped with status 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Hint: Try setting the LogLevel to "debug" to find out more.
D [19/Jan/2013:16:29:39 -0500] [Job 6] End of messages
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state=3(idle)
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-message="Filter failed"
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-reasons=none

Maybe this will help:
https://discussions.apple.com/thread/4158755?tstart=0
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

Canon PIXMA MX892 multi-function printer set up . What is a WEP key?

Trying to set up my new PIXMA MX892 multi-function printer and need to enter a WEP key. What is that and where can I find it?

Hello Vermont-Ken.
The WEP key would be the encryption key that is being used by your router. Please check the documentation for your router to find out more about the current key for the router.
If you continue to have difficulties, please contact our support group using the "Contact Us" link below.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Print window reads "Stopped 'Filter' failed, 1 Page"

Hi
When I go to print a doc my Print window shows the following message "Stopped 'Filter' failed, 1 Page" and refuses to print. I have checked all of the necessary things regarding the printer i.e. calibrating, cleaning printheads, ink supplies & printing test pages etc. Have DL'd all of the up to date drivers and have ensured that I am printing via a solid USB connection and yet still I get nothing. The printer is an Advent AW-10 and was working absolutely fine until I updated to Yosemite however I'm not sure whether or not this has anything to do with it but in my experience of updating OS's it usually does, any help would be fantastic.
The machine I'm using is a Mac Pro v10.10 OS X Yosemite
Look forward to any ideas/help,
Best,
Alex

A rule of thumb: treat any OS update as if it is untested and you are now going to give it one, hang onto your old system 'as is' so you can revert or dual boot.
Check before installing a new OS for problems, for drivers, to insure your hardware and applications and if any need updates check here:
http://www.roaringapps.com
Backup - twice at least. And you may need to start with a new TimeMachine backup drive with new OS so you can revert back; also, even if it is just a smaller partition on your much larger TimeMachine drive, create a partition large enough to hold a system image, clone, that you can boot from if needed.
And definitely do not install new OS over the old. Yes you are suppose to be able, yes there tends to be more issues though if you do - the 'easy' way can turn into the long hard road instead.
And because it might be a good chance to reformat and initialize your drive. Or use this as an opportunity to buy and install a new better system disk drive (SSD preferable at this point - even if you have an SSD from 2-3 years back).
On another topic: those 'forced shutdowns' only make matters worse. ie, directory corruption and damage, possible corruption of files, plist (preferences) for which:
Got files that are not backed up? take care of just those.
Use Recovery Mode and repair the disk drive twice, "top" drive name and again with the system volume name.
Follow up with Safe Boot - might even do that twice.
Use Internet Recovery Mode and do a clean install - to another drive!
... but before you do so, save the installer, copy it to another disk or flash drive etc and then create your own flash installer (Lion DiskMaker is very easy to use for that).
Then you will at least have a solid system, have only Apple updates to worry about, and can begin to build back up.
Setup Assistant makes it easy to import all your old settings and such from your old system or from TimeMachine.
Any problems from there would be OS X 10.10.1 alone. If it IS working though, now is a great time to make a system backup image (clone, something you can restore from or boot from if needed).
And testing done.
People have been doing something along those lines for years, there are dozens of "lists" of "Best practice for updating or installing a new OS"
And done right you have a good safety net so you can -
Set aside the new Yosemite OS for later /
Go back to Mavericks that was working and continue to use that all the time or when you need to do something (print) that requires 10.9.5.
Then when Apple or another vendor has updates for your system, you can install and try those out.
You could end up with backup sets for both Yosemite and Mavericks.
And before you do install say 10.10.xyz some day, make sure you have the last version - would not want a power outage, disk failure, or the update process to go kaput and leave you with no good working system.
See if you can repair and uninstall and reinstall - or delete - the preferences and files and printer cache etc so your system does
Print as it should
Shutdowns properly and no freezing
No directory or disk issues
SMC and NVRAM have been cleared and reset and Startup Disk is reset to the proper default volume
Sorry for length, just meant to say "do some basic system maintenance" is all. :-)

Has anyone else seen this error when printing "Stopped - filter - failed"?

Currently I am trying to print to a new Dell C1765NFW Color MFP with Mac 10.8.2. I can print from a Word document but not from an Adobe PDF file. I have cleared the CUPS folder and rebooted however it is still not working with PDF files. It attempts to print but then comes back with "Stopped - filter - failed". Any ideas? The printer is also connected through USB and the newest driver for the printer has been installed.
Thanks!

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Numerous attempts at a clean install of iTunes have failed. I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100 G HDD space. Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7".

Numerous attempts at a clean install of iTunes have failed. I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100 G HDD space. Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7". The prior uninstall included the establishment of administrator rights to files and folders left in the Apple folder after running the uninstaller, and successfully removing ALL visible and hidden Apple files and folders.
Any other suggestions out there folks?

On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Similar Messages

Maybe you are looking for