Canon Pixma MX 450 printer showing offline with OS X 10.7.5

Any input would be greatly appreciated. I joke with Canon's IT department that I keep them employed! I was calling them at least twice a week for a few weeks to try to fix the problem, but was unable to find a resolution. I returned a less expensive Canon printer today, in a desperate attempt to get my wireless connection to work! I just installed a Canon Pixma MX450 wireless print, copy, scan, fax with my OS X 10.7.5. Everything seemed to be going great. The setup was fine when communicating between the router and printer; none of those connections failed. However, once I installed the software from Canon and tried to setup the wireless connection from the computer to the printer, the printer could not be detected wirelessly-I had to pull out the 'ol USB. With the USB, the printer was detected. The test print page printed, which game me a false hope! I tried a dummy page from Pages and Word both, but nothing prints. The printer error indicates the printer is offline and not connected. This is the same problem I had with the less expensive Canon. Help! I want to be able to use the wireless function that I paid for to print. Thanks

When you connected the MX450 to the Mac via USB cable, it would have created a printer in Print & Scan for this USB connected printer. If you then disconnect the MX450 USB cable from the Mac but then attempt to print to the MX450 using the printer that was created for the USB connection, this will result in the "Printer Offline" message.
So, are you trying to print with the MX450 printer that was created for the USB connection?
If you are not using the USB printer and definitely using the printer that you created when the MX450 was connected to your wireless access point (wireless router), then try removing this printer from Print & Scan and creating the printer again.
If you cannot find the printer when you try to add it again then check the wireless network settings via the control panel on the front of the printer. It will confirm what wireless network it is connected to and what IP address it has acquired.

Similar Messages

Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX processor.

I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help thank you Allan R

So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 - Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
Have new Canon Pixma Pro-100 printer and set it up yesterday. First thing printed was a
document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK. Next I fire up
Photoshop and open a 4 X 6 inch image to do a test print. I set it up in the print dialog as
4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
manages the color. I load the paper in the rear tray close the covers and hit print. Now, when
it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image it doesn't
matter), and it does it printing from Capture NX. I have been able to get it to print on the paper
correctly using Apple's Preview program but that that's not going to do me any good. I was on
the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
I want to be able to print from Photoshop. Any one every heard of this or experienced the same
problem? Thanks JamesD!

Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".

My Dell Inspiron 1525 laptop is USB connected to my Canon Pixma MX392 multifunction printer. Though the
printer is functioning properly in all respects, a message is showing that my laptop "cannot detect" the printer.
At the same time I'm receiving a message (wizard?) "Found New Hardware - Windows Needs to Install Driver
Software for Your Universal Serial Bus (USB) Controller". My Printer folder shows my Canon is "ready",
and the Port is shown as "USB..Virtual printer port for Canon MX390 series Printer". My Device Manager
folder lists the Canon printer and fax under "Printers", and under "Universal Serial Bus (USB) Controllers"
are listed: MX390 series (1 time); Universal Serial Bus (USB) Controller (7 times); Unknown device (7 times);
USB Printing Support (2 times). I've tried unistalling and re- installing everything associated with the printer,
but get the same results. As I've stated the printer is functioning fine, but the "incessant" appearing of the
message, "Found New Hardware, etc." is extremely annoying. When I follow the "wizard's" instructions to,
"locate and install driver software (recommended)", I'm finally told to" insert the disc that came with your Universal Serial Bus (USB) Controller". I don't have any discs that came with either the printer or laptop. Is
anyone able to make any sense of this...and, hopefully, offer help in getting rid of the "Found New Hardware"
message. Many thanks!

I'm not sure the error is related to your printer.
http://www.tomshardware.com/s/install+driver+universal+serial+bus+usb+controller/
Have you tried going to the Windows Update software program and seeing if there are any udates related to your message?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

How do I set up my iPad to print using my canon pixma ip100 photo printer?

How do I get my canon pixma ip100 photo printer to print two pages from my iPad mini? Iam new with the computer terms & stuff, can any one please help me hook it up in easy terms...thankyou

You would have to either use an app from Canon if they have one or use a 3rd party program such as Printopia, Print Central, Fingerprint, etc. That printer is not Airprint compatible.

CP1525NW connected to wireless network. Running W7 64 bit. Printer shows offline constantly.

I have a desktop and laptop configured with W7 64 bit. On laptop printer works fine, on desktop printer shows offline constantly and the only way to get it running again is by uninstalling the software and reinstalling. I have gone online and downloaded the drivers for 64 bit but I keep getting messages indicating the HP (xxxxx) program 32 bit has stopped working. Not getting this on laptop. They are connected to the same wireless network. Help? - Thanks

Let's try to get the printer back to 192.168.0.103.
Browse to the printer's web page again.
Select Networking, then Wireless.
Select IPv4 Configuration.
Select Manual IP Address
Enter 192.168.0.103 for the Manual IP Address
Enter 255.255.255.0 for the Subnet Mask
Enter 192.168.0.1 for the Gateway
Press Apply.
Now turn off your computer and printer.
Turn on the printer and wait a minute. Print the network configuration page and verify that the IP address show is 192.168.0.103
Turn on the computer. Verify that you can browse to the printer's web page and that you can surf the internet.
Try printing
BTW -- what model wireless-router do you have?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Canon Pixma MP280 AIO printer - ink levels cannot be displayed - how to resolve this problem?

Good morning everyone,
I have a Canon Pixma MP280 AIO printer (about 18 months old) now which I previously had installed on a old Windows 7 Pro x64, SP1 Dell Optiplex 755 computer. That computer finally bit the dust.
My present computer is a Dell Optiplex 745, Win 7 SP1 x64 Home Premium machine.
Description of problem: After installing the printer on this computer (using the CD/DVD that originally came with it and following all the instructions), I find the printer will no longer display the ink levels. Every time I click on "Printer Status", the pop-up box just states the info cannot be displayed. (All other functions of the printer work just fine).
Resolutions attempted thus far w/out success:
1. Uninstalled printer and deleted all files associated with it (2 times). Re-started computer, then re-installed it.
2. Emailed Canon Support. their response did not resolve the issue. (Don't recall just what they said as I've long since deleted that email reply).
3. Searched the Forums here for an identical problem with the same model printer, but didn't see anything.
My question: Is there a resolution for this problem?
Thank you for your time and any help.
Pete C.

Yes, thanks for your follow-up .. .Mine did not work after the day-long shut off.
I am gonna risk buying a new black ink cartridge since my machine seems to just be running the error on the black alone.
Good luck with your new one.
I will probably upgrade too, if this does not work. I cannot complain about this machine. I had two, one for office and one for home. Both took A LOT of use. And, i used no-name refill cartridges and no-name refill ink for over half the time on the home machine.
This one, the home one lasted about 6 years, the other about 4+1/2 . I think that is pretty **bleep** (lol it censored the correct spelling of 'dam') good mileage for a fairly inexpensive machine, that got very high ratings, and gave me all those features.
Good Luck.

My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer

Greetings:
I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer. I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord. I'm not finding any option to install it as a usb printer. Please help asap. I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me. I NEVER had this problem w/Dell. (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation. that option is absent in my attempts).
Thank you!
This question was solved.
View Solution.

Firelily, welcome to the forum.
Here is the download page for the driver and the software for the printer. If you install it, you should be able to print.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MacBook Air Canon Pixma ip 5000 printer driver

I have a MacBook Air and I cannot find a printer driver for the Canon Pixma ip 5000 printer driver. Please...Please help me.

Get it from Canon or see if it is listed here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

I need to connect my Chromebook to my Canon PIXMA MG3520 wireless printer

I'm having problems connecting my Chromebook to my Canon PIXMA MG3520 wireless printer. Because of the Chrome OS, it will not connect like Windows or Mac. I need help before retire, please.

Hello Bama-85,
You are correct, printers do not install the same way on Chrome OS. I looked on the Google Cloud Print site and your Canon printer is indeed supported. Follow this link to setup your cloud ready printer.
I haven't setup a Canon printer via Google Cloud Print, but I assume it's as easy as setting up HP's printers on the print service.
Miles
HP Employee

Post Moved New-to-BT-Printer-showing-offline

moved to Other BB queries http://community.bt.com/t5/Other-BB-Queries/http://community.bt.com/t5/Other-BB-Queries/New-to-BT-Printer-showing-offline/td-p/846176-p/846176
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

This link may offer some help also have tried the printers own userguide
http://forumhelp.dyndns.info/hardware/hardware_menu.html
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get no air printer found message. Have shut down everything and restarted. No change

I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

See requirements for AirPrint (http://support.apple.com/kb/ht4356):
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.

New Canon Pixma ip4600 won't show on my Airport Express printer list

Hi,
I've just had to replace my old Pixma ip4000 printer with a new ip4600 printer. The printer has set-up on my iMac and Macbook but it does not show in Airport Utility in the printers section. I've tried unplugging the printer from the USB and unplugging the AE but whichever combination I try it does no good. All ok on the usb direct to the computer.
I've followed many of the support articles to no avail. Can somebody help please? Until the printer shows on the AE I'm unable to print wirelessly.
Regards,
Colin Ashworth

Hi Colin,
As you have said in your post, until you can get the Express to recognise the iP4600 as being connected via USB, you will not be able to add the printer. And note that you cannot use the More Printers > Canon IJ Network facility - this is for Canon's that are connected via Ethernet or wireless to the network.
Are you using the same USB cable to connect the iP4600 to the Express as you are for connecting directly to the Mac's USB? If not, then try another USB cable.
If you are using the same cable, then has the Express got a reset button? I know the Extreme's do and I'm thinking that possibly the Express is still expecting the iP4000 on the USB. If there is no button then you could a factory reset via the Airport utility. You could also check if there are any updates for the Express.
PaHu

Canon Pixma MX 450 printer showing offline with OS X 10.7.5

Similar Messages

Maybe you are looking for