Canon Pixma mx452 error code 5011

Hi,
I bought my printer a couple of months ago and it worked fine. Until a few days ago it just broke down with a code error 5011...I came home turned it on and 'beep beep beep'. I am unsure what happened. I know I was running low on ink so I bought ink and was going to change it but the error occured whenever i turned it on. Now I'm unsure if I should return the ink if the printer is really broken...
Please help...

Hello admirenkiwi.
To try and resolve this issue, please turn the printer off and back on. If the error still persists, feel free to call us at 1-800-OKCANON for additional assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

How can I repair Canon Pixma MP550 Error B200?

How can I repair a Canon Pixma MP550 error 200?

Hi dlp1962uva,
Welcome to the Apple Support Communities!
I understand you are trying to install your Canon printer after replacing your hard drive on your MacBook Pro. It sounds like you have done some great troubleshooting by trying to install the drivers. I did some research on your printer, the Canon PIXMA iP6000D and it appears that this printer software is no longer available through software update.
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Additional Information
Printer software no longer available through Software Update
The third-party vendor no longer provides software for the following models to download and install through Software Update. Contact the vendor or visit their website for further assistance.
The The Additional Information section where I found this information is at the very bottom of this article. This printer specifically is listed as a printer that is no longer supported by software update is the list under Additional Information. I would suggest contacting Canon to see if the printer drivers are still available through them.
I hope this helps,
-Joe

Quick Menu Software for Canon PIXMA MX452

Whenever I click on the Quick Menu program for the subject product, I get the following error message:
Canon Quick Menu has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have uninstalled and reinstalled the driver and Quick Menu software several times, from both the disc provided and on-line downloads.
I have turned off my anti-virus/firewall program and also told the security program that the Canon program is a trusted application.
I am able to print/scan/copy, but not from the Quick Menu, which is more convenient.
Please help.
Solved!
Go to Solution.

Hi clarkdjensen,
There may be a third party scanner driver interfering with Quick Menu. Please try the following:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C: ).
3. Click the down arrow beside Windows to open the folder
4. Highlight the twain_32 folder.
5. The folder should have 2 folders that start with PIXMA MX452 and a file called wiatwain.ds. Any other folders or files should be dragged to the desktop.
6. Reboot the computer and try scanning again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon PIXMA MX860 Error 311

Hi,
I recently bought a Canon PIXMA MX860. I want to print wirelessly via bluetooth from my computer, but an error message keeps on popping up "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred eliminate the cause of the error."
I updated to all the newest drivers. I tried looking at the gutenprint drivers, but I couldn't find one that works with the Canon PIXMA MX860. Any help would be much appreciated!

These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410&#10105410
http://discussions.apple.com/thread.jspa?messageID=9962758&#9962758

Canon LiDE 110 error code: 5,202,52

i just got my brand new LiDE 110 scanner, and i installed the driver and everything was fine except for the error code 5,202,52 keeps showing up. i tried everything i could do, including reinstalling the driver over and over, however, it doesn't work.
my laptop is win7 64-bit home premium. im getting crazy, any one help?

Hi jakehues,
The 5,155,75 error is a generic communications error and unforutnately does not pinpoint the cause. Please make sure that the USB cable that you are using is 6 feet long or shorter. Also, please make sure that the USB cable is connected directly from the CanoScan LiDE 110 to your computer and is not connected to a USB hub or some other device. Please disconnect all other USB devices connected to the computer and then attempt to scan. Are you able to scan?
If not, please try temporarily disabling security software and then attempt to scan, as firewalls and anit virus have been known to cause these type of errors as well.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon MG5250 showing error code:5,202,54

It was fine a day or two ago, still prints, but scanner is not functioning.
Does anyone know how I can fix it? or is it a hardware problem?
many many thanks

This is a very common problem. I have a CanoScan 9000F and at least once every 5 attempt, I get error code 5,202,54. Sometimes the only way to fix it is to shutdown the PC and start again, sometimes I had to reinstall the driver: a lengthy process! I asked several time Canon to provide a fix but it looks like Help Desks are designed to prevent customers to submit requests to development team, so there was no way to have a patch. I wonder where is the value to have good hardware if the software to use it is so poor.

Zen Micro Media Explorer won't install Error Code: -5011 : 0x80040

Hi!
I've just tried to reinstall the software on my new PC
The installation get almost to the end but then another window pops up saying
Error Code: -50 : 0x80040707
Error Information:
>SetupDLL\SetupDLL.cpp (548)
pAPP:Zen Micro Media Explorer Software Update
PVENDOR:Creative Technology
PGUID:2BA32AF9-FC5F-4A0-A57C-8539DB8A8BC
$9..0.429ice Pack 2 (2600) IE 6.0.2900.280
Any ideas what I can do to get around this problem?
Thanks
Ann

just got a zen micro and guess what i am having the same problem, running on widows ME, went through the installation procedure. get a big red x that says windows cannot find driver, tired to reinstall the drivers both from the cd and from the usbman.com site, all end up in the same place, reinstalling drivers is not just happening. the systems subolder shows a yello question mark under zen creative.
a hint or two:
. i had the same problem with my Rave mp3 player and the service support fellow asked me to download the files from usbman.com, still didnot work. returned the **bleep** thing.
now i have the zen and guess what, it is doing the same thing, wonder if it is windows me?
2. when i restart the computer is get the following message (this is new for today)
windows could not upgrade file % etc. etc. this error happened on the restart after installation.
help me please.

Canon PIXMA MX860 error message ScanGear

When I click on my Scanner (I put MP Navigator EX in my Dock), the application opens, but then a window opens that states:
ScanGear Searching for Scanners
Do you want the application "MP Navigator EX 2.1 app" to accept incoming connections?
I have to then click "Allow"
Setting can be changed in the Firewall panel of Security & Privacy preferences.
I have gone into the Firewall panel of Security & Privacy and added the scanner and the MP Navigator EX 2.1 app to allow incoming connections; I have also updated all software I could find relative to the Canon PIXMA MX860 on the Canon website.
But every time I try to use my scanner, I have to click on the "Allow" button, as if I never changed the settings int he Firewall panel.
It's not a big deal, just a nuisance to have to keep on clicking the Allow button every time I want to use the scanner. Any thoughts?

These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410&#10105410
http://discussions.apple.com/thread.jspa?messageID=9962758&#9962758

Canon mp258 b200 error code

i had a problem with my canon mp 258 error b200

Hi guadaduque, thanks for posting! In order to allow the Community to better help with your question, we'll need some more information from you.
What exact computer operating system are you using? Once we have this information, the Community will be better able to help get you up and printing again!

CANON PIXMA MX397 SUPPORT CODE 5B02

pls help me with my canon printer pixma mx397...at first, it said that ink waste pas was full so i just clicked the ok button on the machine. but when i tried nozzle check or deep cleening, it said "Printer error has occurred. support code 5B02" how can i fix this problem?
thanks and God bless!

Ebony, I'll spell out specifically what could be inferred from my post. 11 inch paper works, 10.3 inch paper fails. I'm not sure at what point between those two lengths the failure begins. Some experimentation with various lengths could more precisely determine that, but Canon should do that research themselves. The point is that it makes no sense to me that this limitation exists. The mechanism should continually feed whatever size, within reason, that is fed as long as it detects more pages. Obviously as some point the doc will be too short to feed correctly, but a difference of seven tenths of an inch is reasonable to expect functionality to continue. Having 42 years of software development behind me, I really feel this issue can be fixed programaticly, be it driver or application.

Canon Pixma MP640 Error B200

Hi,
When I turn on my printer it give me B200 error. A week ago I disconnected supply cable for 12 hours and it go well.
Now I tried to disconnected already for 12 hours but this time it don't go.
I I replaced all cartridges, clean printer head with water and dry it, but it don't go.
I tried to go in service mode and green and orange led flashing alternatively. If I try to press resume 4 times in service mode to reset ink waste, nothing happens.
Advice???

*** DISCLAIMER *** You'll try the following advices solely on your own responsibility!
After B200 error in my MP640 (Europe version) I firstly carried out a print head cleaning method with alcohol and distilled water (6 + 6 min) proposed at [link removed per forum guidelines] (see down on the page and use Google translate if needed).
Well, cleaning alone didn't help.
After that I found from another forum an 'open print head bay boot' (like I'm calling it...) trick which I combined with an idea of nozzle cleaning. So I managed to solve my B200 problem as follows:
1. Turn OFF the printer and make sure there is plenty of ink left in every tank.
2. From "Devices and Printers" open MP640 properties and further the "Maintenance" window.
3. From Maintenance section select nozzle cleaning (all colors), preferably the 'deeper' one. And then STOP! Don't start any cycle yet.
4. Open the print head bay (as though you were about to change inks).
5. Turn ON power.
6. Wait for print carriage to start moving to the left and let it go past half way.
7. Before print carriage reaches left hand side (but after going halfway across) shut the cover.
8. Printer's display turns now into dark color and shows text "Canon" above the 'running balls'. During that time start the cleaning cycle but don't do anything else, i.e. don't try to print the test page yet.
9. Nozzle cleaning should start right after printer initializing.
10. After the cleaning cycle is finished run another one without printing anything. Make sure you don't run out of any ink.
11. Print the test page to check if additional cleaning is still needed.
I had to do the print bay boot + nozzle cleaning another time because B200 error returned quite soon after the first try. But after some more cleaning cycles and printing everything seems to be ok now. Hope this helps with your printer!

Canon PIXMA MX882 error message b200

I just received an error message b200 and a message saying I should disconnect the power cord and contact a service center. I did what some others did and removed the printhead and flushed it with water to clean it and put it back. Didn't make a difference. Also, when I turn on the printer, it makes a nasty scraping noise. Does anyone know how serious this problem is? Can it be fixed, or do I need to retire this one and get a new one. If I get a new one, any recommendations. I need the print, scan and fax functions and am willing to spend up to $200. We usually don't print photos from the printer. I need a working printer very badly since I use it for work.

Hello,
Please try unplugging the printer for at least 10 minutes. If the issue persists at that point, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance. They will let you know of all the options you have.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon pixma mp250 error 5400(P06)

Hi everyone i have a problem. Today i bought color catridge cl-511 and black catridge pg-512, the other one smaller pg-510 cl-511 were empty. Yesterday printer worked fine but when i inserted both catrdiges today, error 5400(P06) occured. I dont know how to fix it, please help me, thanks in advance.

Can some one help me ?

Snow Leopard Upgrade Canon Pixma iP6000D Error 603 won't connect

Tried everything I know how - downloaded the proprietary and open source drivers, power cycled, restarted, etc.
Can't get my airport base station shared printer to connect. Ideas?

Before I updated the driver and firmware, I would see the printer as a Bonjour device but when I selected it, a sheet would drop down and then disappear quickly. After the updates this window then took more time to display, showing Determining Installable Options. Is this occurring for you?
I also found that when I selected the Gutenprint offering, even after the update, the print job took ages to spool.
Pahu

Canon MX860 repeats B200 error code -- brought it back to store , they couldn't fix it.

Canon MX860 has error code B200, have cleaned and removed printer head
code still blinks.

Ref my MX860. So... I did NOT wash head or anything. I opened cover, shoved print head manually to left all the way. Rapidly pushed "on" button a bunch of times until unit beeped back at me with funny sounds and went completely dead... Well, before throwing out the second story window, I then rapidly, pushed "on" 5 or 6 times and noticed the print head moved to the right. I shut the deck and waited... and waited... the 'infamous' Canon 'I'm gonna print, no wait, wait, really, I am, in a minute, wait, wait, listen to my sweet sounds, wait, I'm fixin' to, wait". And then it happened! Everything got real quiet and my LCD screen popped up, looking totally normal. So far, it prints, copies and will send a fax. Try it, sure won't hurt, and it seems to have fixed mine :-)

Canon Pixma mx452 error code 5011

Similar Messages

Maybe you are looking for